Re: How to?

"iamrustless" <bethalk@...>
 

Check the threads on the stud. Still good? Wrap a rag around the
area where the threaded stud hole is. Clean out the threaded hole
with some spray degreaser (wear good eye protection). If the threads
in the hole are still good (you are lucky) use some locktite to
secure the stud in the hole. Put two nuts on the top portion of the
stud, lock them together, and install the stud into the hole. This
has worked well for me on other applications. Hal

Join Crosley-Gang@groups.io to automatically receive all group messages.