Hello folks, Does anyone have a good source for an air conditioner accumulator or receiver/dryer here in the States? Asking for a friend who wants me to get the AC going on a second series Prestige. -

My turn to ask for help on Spheres :-) When I looked for a set of front spheres for Gary I tested all the Spheres I had on hand, and all but one were in great condition, pressure-wise. The one that fa

I am just using the little bolt hole at the front bottom of the tank. But while I was letting it drain slowly with the bolt partly in so I could stop it if I had to. I decided to check the spark plugs

When I got my rear A/C unit years ago at Classic Air in Tampa, they just took The original thick regular hoses under the hood, and made a T section for both feed and return.. Those hoses are right ove

Re:- normal small diameter union nuts. The original are 9mm A/F but Pleiades supplies 10mm A/F. This small difference makes a huge improvement to "useability". If you haven't tried them, get some. Ala

Who knows… it looks genuine but still there is the idea of is it an OK idea in a pince and to add the bigger huts … it works on other things but. By that works, I mean this guy took compression fittin

A busy street and won’t start after dying of ….. it is my believe that for perhaps The 100th time (min.) in my life, I have run out of gas BUT…. In this case it is worse…… I was so awed by how well th

But a short type of reinforning hose over the other to handle perhaps the pulse? And protect the area from the clamp ?…. Does. Anyone have the original clamp on their car…? Is it supposed to be a soli

The the stem of the T is a push on to the metal nipple from the back of the steering Rack… all this positioned behind the rack and resting on the yellow plastic housing box thingy in parts that surrou

Or SHORTER if bad…. my car is staying up from HIGH possible well over night and the morning… The rear does come down somwhat before the front which has the used (70bar) spheres Preben sent me …. With

I'm looking for a rear locating pin for the rear wheel covers. I couldn't find the part number in the parts book and online searches are not coming up with anything helpful. This is the nylon locating

I looked at this container (bright red) every time I used it and kept writing it was JBWELD….. I had used JB a couple of times for different things but of course This Marine White stuff is Loctite…. W

I hesitantly removed the outer rubber cover, and it was almost dry and this rubber seal seems so too.. Looking further I moved the 90º black rubber nipple or elbow nipple ..whatever. It was cracked, a

From the tank, but it might be possible (will see) to use the smaller 1/2 inch… But why bother when the other one is working… just a little bit to big in ID

Size and working pressure

I believe PS: on the last email about the brake compensator rubber, it LOOKS wet all over, but that is the penetrating oil I sprayed on the joints etc in case I have remove anything

Well Preben for one will cringe about this one 8-))) I jumped to a conclusion that I mentioned after drive around the block a bit…. Oh my so many clunks and creeking back there in the suspension where

Does anyone listening out there know of anyone with a brake accumulator for a 1986 CX 25 ….. meaning in Southern California or even Northern cal. Or ???? Well also 2 rear suspension spheres too. I am

I know that I should know this but every time I need to change the oil I find a different document and they all provide a different volume value. My CXA owner's manual says 10.5 pints, I assume that i