Welcome to our new group

here are some links for CI-V transceive that some asked about and the Covid-19 procedure to protect the end users https://www.youtube.com/watch?v=s9VK6s632n0 https://www.youtube.com/watch?v=jhb7Ef3kXn

Here we go gang the units are ready shipping, already in USA, UK, Germany and Australia :-P here are the latest info sorry for the delays its been wild getting the PCBs and hardware in, am in final aj

Answer is NO, the CI-V protocol has evolved since the early days on radios like the IC-735 where the commands sets were very basic like freq up and down, set freq and set bands (and more obviously!) N

I am working on multiple CI-V designs like the IMK1 (8 memory keypad for 7300, 9700, 7610), IAC(Atas-100/120 CI-V interface) and CT-17B ICOM CI-V Hub and planning other like possibly the external keyp

its a little (lot!) old the basic principals are still the same, the commands have had an evolution. https://www.dropbox.com/s/dim7d2ts0yfm3qa/CI-V%20Reference%20Manual%20Third%20Edition.pdf?dl=0 The

The answer is simple, always 1/8 audio MONO cables!! Why the CI-V hardware is design around the 1/8 audio mono cable so if you start using stereo cables in most cases you will be ok !! BUT!!! if a thi

If you are shopping for a USB cable to use with ICOM radios, the most important thing to look for is the chipset. over the years we have encountered thousands of issues with Prolific and pl2303 chip s

Here is a really nice simple (very!) project from a VE2 Friend of mine. https://create.arduino.cc/projecthub/ddufault/external-s-meter-on-icom-radios-with-ci-v-port-d4e783 it is using a Yaesu made ext

The answer is YES, but you must understand that this will affect your applications and something the other devices linked to your radio The ICOM CI-V protocol uses 2 digit adressing for the ICOM radio

Ok, here is a project I am still working on, the IMK1 (ICOM 8 MEMRY KEYPAD), is a 8 memory keys keypad for the 7300, 9700 and 7610 probably other need to check... the unit is NOT attached to the micro

Here is another Ham project been working on for a while now and with warmer weathers up here in the GREAT WHITE NORTH! I realy need to finish this one soon and install the antenna on the mobile :-P th

Ok, ICOMs CI-V it a very usefull and very simple protocol. In this posting we will look at how we can figure out if the radio is in RX or TX and switch it to RX or TX. First the CI-V protocol is a han

Here we go, totaly rethinking IMK1 and added IMK2 and IMK3. they will be CI-V based memory keypads in 3 variations. This small video will show you the diretion I am going... NOT! https://www.youtube.c

Hi Group Trying to get commands for the Band Stacking Registers working with my IC-7610 so as to switch between them using programable "buttons" in my logging software. Not having any joy however. The

Or am I! https://www.youtube.com/watch?v=sFxCrFwhaRw -- Only the Best ICOM, ERC and HRD https://groups.io/g/CIV Follow my projects on www.facebook.com/VE2DX/ 73 Richard VE2DX, Jesus Island, PQ-014

Well am still working on the CI-V based 8 memories keypad for the 7300, 9700and 7610, but running into major issues with finding a good quality capacity touch screen at a fair price to make the keypad

the original Icom CT-17 is still available from some Ham Radio retaillers, but it is dating from the 1980s. the new just release VE2DX CT-17B Icom CI-V hub, is an improved windows 10 plug and play var

OK, well after many months working at everything, a big piece of the puzzle is now online. www.ve2dx.com ( http://www.ve2dx.com/ ) our new web site is live. you will find information on our project, h

Some users have asked us about the fact that the USB cable on the CT-17Bs are fixed length and hardwire, the present design was done to keep the units as small as possible. The USB cables presently us