Welcome to our new group

here are some links for CI-V transceive that some asked about and the Covid-19 procedure to protect the end

Here we go gang the units are ready shipping, already in USA, UK, Germany and Australia :-P here are the latest info sorry for the delays its been wild getting the PCBs and hardware in, am in final

The answer is simple, always 1/8 audio MONO cables!! Why the CI-V hardware is design around the 1/8 audio mono cable so if you start using stereo cables in most cases you will be ok !! BUT!!! if a

Answer is NO, the CI-V protocol has evolved since the early days on radios like the IC-735 where the commands sets were very basic like freq up and down, set freq and set bands (and more

The answer is YES, but you must understand that this will affect your applications and something the other devices linked to your radio The ICOM CI-V protocol uses 2 digit adressing for the ICOM

I am working on multiple CI-V designs like the IMK1 (8 memory keypad for 7300, 9700, 7610), IAC(Atas-100/120 CI-V interface) and CT-17B ICOM CI-V Hub and planning other like possibly the external

its a little (lot!) old the basic principals are still the same, the commands have had an evolution. https://www.dropbox.com/s/dim7d2ts0yfm3qa/CI-V%20Reference%20Manual%20Third%20Edition.pdf?dl=0 The

-- Only the Best ICOM, ERC and HRD https://groups.io/g/CIV Follow my projects on www.facebook.com/VE2DX/ 73 Richard VE2DX, Jesus Island, PQ-014

If you are shopping for a USB cable to use with ICOM radios, the most important thing to look for is the chipset. over the years we have encountered thousands of issues with Prolific and pl2303 chip

Here is a really nice simple (very!) project from a VE2 Friend of mine. https://create.arduino.cc/projecthub/ddufault/external-s-meter-on-icom-radios-with-ci-v-port-d4e783 it is using a Yaesu made

the original Icom CT-17 is still available from some Ham Radio retaillers, but it is dating from the 1980s. the new just release VE2DX CT-17B Icom CI-V hub, is an improved windows 10 plug and play

Also keep in mind that while there is a default address for each model of radio, some applications hardcode these addresses, so if you change the address in the radio, the application may not

Very good info Micheal... yes address 00 is often used by hardware also... it is also interresting to know that CI-V is a handshake protocol thus the protocol ids the host (application or device

Ok, here is a project I am still working on, the IMK1 (ICOM 8 MEMRY KEYPAD), is a 8 memory keys keypad for the 7300, 9700 and 7610 probably other need to check... the unit is NOT attached to the

Here is another Ham project been working on for a while now and with warmer weathers up here in the GREAT WHITE NORTH! I realy need to finish this one soon and install the antenna on the mobile

Ok, ICOMs CI-V it a very usefull and very simple protocol. In this posting we will look at how we can figure out if the radio is in RX or TX and switch it to RX or TX. First the CI-V protocol is a

Yes, my understanding is that it is 'See-EYE-FIVE' one of the variations of the definition is Computer Interface release 5, there are others even ICOM changed this over the years. Hope this helps

Trivia note: I had always pronounced CI-V as "See-Eye-Vee", as did everybody I've ever heard discuss it. I had occasion to talk to an Icom guy a while back and he politely informed me it was properly

Here we go, totaly rethinking IMK1 and added IMK2 and IMK3. they will be CI-V based memory keypads in 3 variations. This small video will show you the diretion I am going...