Re: IC-705 antenna switch from band data


As a follow-up to my previous note, since I missed that you wanted separate HF, VHF, and UHF antennas, you would need a single triplexer, like this:

To gave you automatic selection of an HF/6m line, a 2m line, and a 70cm line.

Ken, N2VIP

On Jan 18, 2022, at 08:16, Mark Kyle <kylecom@...> wrote:

´╗┐Hi Richard

I have been looking at the CT-17-BT6 to see if I can get it switch relays per band using CI-V data.

I want to run my 705 remotely via some new Mac software that DL2YMR has released. When I am on a HF band I would like to have a HF antenna connected and when changing to VHF a specific VHF antenna connected via a relay and the same for UHF.

Do you have something that will do this easily...I see you are working on a router that may also be able to do this.
On each coax after the relay will probably be a linear amp so the switching relays dont need to be large they can be the small RF relays that are pcb mounted
Any ideas?


Mark Kyle

Join to automatically receive all group messages.