Gm group i bought this as a unfinished kit. I put it together fired it up, upgraded it to the CEC software. VERSION 3 It has the real nice blue metal case with several adaptor boards for IO ports. It

I was wondering if anyone has any ideas about wiring up the SP stereo jack & the MIC jack, because I can not figure this out of which pins and how to connect them?? A sketch or photo would be a great

I removed my VFO to add a washer behind it but in doing so the black wire/tab was bent over the next tab which is ground. Without noticing this I turned the radio on. The BG lighted up and the radio s

This past weekend, I went back in time and reviewd posts back to 2018. About half way through I started taking notes but... I did not take any notes on how to unbalance the balanced modular to get a s

Total loss of power output occurred 1st that Is why I replaced the PA transistors. As it seemed likely that I'd blown my finals I replaced both with genuine RD16HHF1's. After doing this I had no audio

On Wed, Jan 13, 2021 at 10:30 PM, Ashhar Farhan wrote: On my bench is a new rig coming up that is built for high performance, hybrid sdr capabilities. When do we get to learn more? Tom, wb6b

A question of curiosity about FT8 and the level of power being used, I have a uBITX v6.2 with a usb dongle running approx.5-7 watts into either a cobweb, 20m hexbeam, or a 20m delta loop, all antennas

My uBitx V6 worked well for a few hours, then the power output stopped. (I smelled some smoke for a few seconds, and shut down, but it was too late.) I then could still hear a weak signal on my other

Greetings all! :-) I received my basic µBitX v6 kit on Friday! Yay! I was very pleased by how quickly the kit arrived in Oregon, USA from India. I've had things shipped from the US to me and it's take

I would like to know if I can use HP 2800 series Schottky diodes in the EASY BITX mixers circuits. Can anyone give me answers? 73 de -- IW4AJR Loris

My new ubitx v6 has varying volume. It starts low and ramps up to max volume and then back to nothing over about a 5 second cycle It could be varying audio or rf gain. It happens on all bands. Has any

Hello everybody and HNY, Has anyone tried to operate QO-100 sat using a Ubitx? What a pity most operators in the US can't uplink that SAT!

Evan and Group How do the selections of relays KT1, KT2 and KT3, or TXA, TXB and TXC work in uBITX v4? How are frequency bands selected? 73's Rubens py2pvb

Hi, Anyone know where to find code for fat big number plus dot fonts for arduino? I really don't like the small fonts. ; ) Rafael PU2UIT

Hi all, Have you realized that CAT commands to change the mode to USB or LSB, when in VFO_B, it goes back to VFO_A and does not change the mode? And the screen gets a small freeze. When in VFO_A, all

Hi all, although not a new subject, now that there are many more users, I'm hoping to get some direction to fix the problem. My friend had his Bitx working but added a speaker and accidently hit the P

Hi all, New v6 user here and have assembled the kit, placed in the box and just need to connect up the power cable. I have searched through the instructions on the web and even gone through some of th

I know next to nothing about it, but would it be possible to use a Raspberry Pi Zero as a controller for a uBITX style radio? I looked at the Pi Zero pinout and there appear to be an adequate number o

Hi, I'm sorry that you probably read 1000 times this question, anyway, when adjusting the BFO, I see two "sweet spots" - when I can get signal in the spectrum, one in a lower frequency, other in the h

For all, I would like an opinion, I have uBITX v4, the RF power is oscillating, now with more intensity, as it is a QRP, I believe that a variation of 2 to 3 watts is not a good practice in the 40m (7