I have been playing with my V6 for a couple of weeks now and I am really starting to like it although it will never replace the old trusty Kenwood TS-520SE! I have worked 7 states with it, mostly on 4

Hi all, I am trying to fine tune my uBitx v6 w/ 6.1 firmware. It could be that my understanding is faulty, and I'm hoping for some clarification. I have two identical Raspberry Pi 4 computers running

I took the outer connectors off a V6 and installed the mother board in an Inkits case that I had. The original connectors were linked to the circuit board by 3" long pieces of thin wire. The 12V conne

I have the v6 full kit with case. I'd like to simply my cabling going forward and replace the BNC with a SO-239 connector. I understand how this works electrically/RF-wise but I'm not sure what the be

Hi guys Yesterday I Installed a homebrew 3S2P li-ion battery pack into my ubitx cabinet Had planned my cabinet for the right space & fit Now I can carry my ubitx for outdoor action Next I am building

Yesterday afternoon I was in the shack with the uBitx and everything was working fine. I shut it down as always, and when I came back today and turned it on, it didn't work. There is nothing but zeros

https://www.instructables.com/DIY-Digital-Soldering-Station/?utm_source=newsletter&utm_medium=email _._

I just want to say Hello and introduce myself to all the members here and ask the first of, I am sure there will be many questions. My name is Mike or Michael, either one I will respond to, I am an ex

Hi All, Been trying to get the Nextion CEC firmware going. I wanted to make some changes to the Arduino code (it was written for the 12MHz IF filter) and adapt it to the new 11.059MHz IF but when I tr

I recently purchased a V5 uBITX that had been assembled in a metal enclosure like those marketed as Universal Cases by amateurradiokits.in. There's nothing wrong with the enclosures. I have other uBIT

Hi all, Do you know who is the sales contact of HF Signals? I could not find the sales rep in the website. Best regards, Rafael

Hi all, my v6.2 unit has had a weird thing ever since I received it. During transmit, the display screen acts like it is being pressed. Some times I see "fast tune" light up. Also, if I have the right

Disclaimer!!! I have no idea what I'm doing, but it sure is fun anyway. Does anyone have a clue as to the bandwidth of the bandpass filter on a Bitx40 or Easy Bitx? My breadboard version looks to be a

If anyone has been considering getting one of TSW's Teensy 4.1 Raduino Clone kits (see www.w0eb.com), I have only enough Si5351a's to complete 15 kits. My suppliers (Digi-Key and Mouser) are showing o

Hello folks One of my dream projects would be to construct a transceiver myself, and the uBitx is pretty close to what I imagined building, and although I am an PhD in electronics engineer, I have no

I ordered the full kit sometime ago and finally got around to putting it together. I am so disappointed that is does not work. Display and controls seem to be fine, however any signals that are receiv

Over the weekend I picked up a uBitx 6 in the Huntsville, AL Gigaparts store and assembled it fairly quickly at the kitchen table the following day. It is a very straightforward assembly! I found a sm

Hola, estoy trabajando en la sustitución del Arduino Nano del uBitx v6 por un módulo con ESP32. Las principales ventajas que tiene este micro (https://www.espressif.com/en/products/socs/esp32/overview

I may be overlooking something, or perhaps just haven't acclimated to the layout of groups.io yet, but I have been having a very difficult time piecing together what firmware would be best for a ubitx

The following files have been uploaded to the Files area of the BITX20@groups.io group. /AGC BITX UBITX/20210223_uBiT_AGC_Modification.pdf By: vk4amg@... Description: Increased sensitivity with AGC an