All: I've been rattling on about the "new Projects" book off-and-on for about a year. Al (AC8GY) and I are sending the book to the publisher (ARRL) on Friday, completely finished and ready to go! The

Connected to a Raspberry Pi4 running WebWSPR by DJ0ABR. The sound out is hard to control, I do need to put some attenuation in. -- PE3ES - F4VTQ - Erwin 73

I have a loosely soldered uBITx on my work area connected to a 12V power supply and a headphone. Nothing properly mounted , shielded etc. Just to hear some RF coming in as the kit arrived just some ho

Hello, Just got my ubitx v5, files section of groups.io is a big mess, 1- where i can find document or list of enhancement and modification for this kit (agc, mic compressor ...) ? 2- where can i find

Hello All, I have been working on a UBITX V5 and am installing both a BCI filter and the Kit-Projects AGC. According to what I have read regarding the BCI FILTER and the Kit-Projects AGC, both are ins

Well I finally gotten the STM32F769-FT8-Transceiver project to a state worth releasing. I have placed the files required for making the project on Github at this location: https://github.com/chillmf/S

I am starting work on a rig control system for my uBITX and have a few questions...... Hamlib uses numbers to identify the rig that is being controlled, like this: 133 Vertex Standard VX-1700 1.1 Alph

Hi all Possibly interesting for people with an Antuino who want to check the calibration; or many other pieces of test equipment - I built an interesting 7MHz signal generator with very accurate 0dBm

I have ubitx 163/ 2 tuned to correct frequency, reception is good but audio is vibrating badly making distortion. I connected an external amplifier from TP 20 . The same problem existing. That means d

Trying to load nextion firmware on a 2.8 lcd. The load is saying that the model in the firmware and the model of the lcd don't match. Is that a known problem? I have double checked that I have the rig

I have read over the info about the uBitX on HFSigs. I understand it receives LSB and USB, but there is no mention of it being capable of receiving AM. I am considering getting one to use primarily to

Has any used this board in their ubitx, and if so, how's it working? How was the installation? Any gotchas? https://www.elekitsorparts.com/product/ubitx-digi-interface-module-add-on-board JP K5AXL

Hello Group, long time lingerer, first time poster. I've had the uBitx V4 for almost a year now, and have used it for listening a bit, but not much. Recently I met a local ham (VE7PS) that really got

I just wired up my uBitx v5 and on the table it is outputting a loud hum or buzzing that intensifies when I move my finger closer to the ground wire of the volume control. I am new to electronics and

I been unsuccessful loading KD8CEC software for the V5. I can’t figure out how to compile and upload the.hex files. I can upload .ino with no issues

I just wired up my v5 uBitx and have it on the table and have have an EFHW antenna plugged in. I am picking up two different loud FM stations, one is 97.7 and the other is around 104. When I unplug th

I have a BITX 40 (V3, #270) for sale, still in its original shipping box. I already have 2 units built and know I won't have time to do this one. The price is $50 and that includes shipping to CONUS.

All: The BIX40 is sold. Thanks for the interest! Jack, W8TEE

can somebody tell me where can I found the latest standalone signal analyzer firmware (hex file)

Greetings, I have a working ver5 uBitx using the "stock" display. I want to now use a 3.2" Nextion and CEC software. Could someone point me to the proper sketch. I am using what I believe to be the pr