Hi guys Yesterday I Installed a homebrew 3S2P li-ion battery pack into my ubitx cabinet Had planned my cabinet for the right space & fit Now I can carry my ubitx for outdoor action Next I am building

I just want to say Hello and introduce myself to all the members here and ask the first of, I am sure there will be many questions. My name is Mike or Michael, either one I will respond to, I am an ex

https://www.instructables.com/DIY-Digital-Soldering-Station/?utm_source=newsletter&utm_medium=email _._

I have the v6 full kit with case. I'd like to simply my cabling going forward and replace the BNC with a SO-239 connector. I understand how this works electrically/RF-wise but I'm not sure what the be

Hi All, Been trying to get the Nextion CEC firmware going. I wanted to make some changes to the Arduino code (it was written for the 12MHz IF filter) and adapt it to the new 11.059MHz IF but when I tr

I recently purchased a V5 uBITX that had been assembled in a metal enclosure like those marketed as Universal Cases by amateurradiokits.in. There's nothing wrong with the enclosures. I have other uBIT

Hi all, Do you know who is the sales contact of HF Signals? I could not find the sales rep in the website. Best regards, Rafael

Hi all, my v6.2 unit has had a weird thing ever since I received it. During transmit, the display screen acts like it is being pressed. Some times I see "fast tune" light up. Also, if I have the right

Disclaimer!!! I have no idea what I'm doing, but it sure is fun anyway. Does anyone have a clue as to the bandwidth of the bandpass filter on a Bitx40 or Easy Bitx? My breadboard version looks to be a

If anyone has been considering getting one of TSW's Teensy 4.1 Raduino Clone kits (see www.w0eb.com), I have only enough Si5351a's to complete 15 kits. My suppliers (Digi-Key and Mouser) are showing o

Hello folks One of my dream projects would be to construct a transceiver myself, and the uBitx is pretty close to what I imagined building, and although I am an PhD in electronics engineer, I have no

I have been playing with my V6 for a couple of weeks now and I am really starting to like it although it will never replace the old trusty Kenwood TS-520SE! I have worked 7 states with it, mostly on 4

I ordered the full kit sometime ago and finally got around to putting it together. I am so disappointed that is does not work. Display and controls seem to be fine, however any signals that are receiv

Over the weekend I picked up a uBitx 6 in the Huntsville, AL Gigaparts store and assembled it fairly quickly at the kitchen table the following day. It is a very straightforward assembly! I found a sm

Hola, estoy trabajando en la sustitución del Arduino Nano del uBitx v6 por un módulo con ESP32. Las principales ventajas que tiene este micro (https://www.espressif.com/en/products/socs/esp32/overview

I may be overlooking something, or perhaps just haven't acclimated to the layout of groups.io yet, but I have been having a very difficult time piecing together what firmware would be best for a ubitx

The following files have been uploaded to the Files area of the BITX20@groups.io group. /AGC BITX UBITX/20210223_uBiT_AGC_Modification.pdf By: vk4amg@... Description: Increased sensitivity with AGC an

Can some explain why the libraries are in two different areas. One is found in programs - Arduino - libraries, and the second one is in documents - arduino - libraries. As always, I appreciate the inf

HI everybody, When transmitting an OFDM signal with 8W until 10W with the ubitx v6, the output signal is crystal clear, but when I start to reduce the signal level (from a line-out of a computer), at

I'm homebrewing a clone of the Raduino control board currently described on the HFSignals webpage. The new v6 version of the uBitX PWB uses an 11.059 MHz crystal filter whereas the older v4 board that