I am travelling to India soon and would like to pick. A coupe Bitx40's any idea where I might find any near Mumbai?

The Airpal SSB Transceiver is finally available, Highlights of Airpal.on 1. Dual Band 20mt/40mt ssb tcvr 2, RF Output 20MT 2 watts . 3 RF output 40 MT 5 to 7 Watts 4. Designs Bi directional 5. Expanda

Hi Now that I have the ubitx 6 working great I would like to connect it to my antenna tuner and then to the antenna as a second radio. I want to be able to use the Icom or ubitx (but only one at a tim

Hi I am thrilled with how well the ubitx v6.1 works but I have a question regarding tuning steps. I can use fast tuning steps and i can use slow tuning steps but if i type in 3846 for 80 meters and th

I don't know why but I ordered another V6 board - I now have four, this is a sickness... :-\ HF signals must finally have all of the kinks worked out as I cabled it up and immediately had a working ra

Hi Friends I tried using a single IRF 150 with a drive of 200mv and 35 volts from a voltage booster and here is the video which shows Easy Bitx 40 pushing out 20 watts . https://youtu.be/-1B_H76oOlw R

When transmitting SSB, the radio works with power up to 10W without any problems. However, when working with the FT8 emission, the power drops to 1W and I am unable to increase it in any way. The sign

I am expecting delivery in a few days of an RS918 (originally designed by M0NKA). It supports Freedv, just for your information. Gerry Sherman Sent by the Linux Thunderbird On 2023-03-26 23:35, Ashhar

I am building a V5 into a pelican style case for POTA activations. My concern is that while inspecting the board, I noticed that one of the RV3 pot nearest the finals is slightly twisted or skewed. Is

Hi All I've had an uBITX v6 for a couple of years now, at first I used it without modifications, but after a while I started modding it. 1) Increased mic gain to avoid shouting at the microphone 2) Al

I need help with reloading the V6 soft ware. If you can help me, please call 907-262-7699. i have read numerous times the instructions on the web and have attempted to follow them with no success. I a

What are the differences between ver 5 and version 6 ubitx? Spurs improved on ver 6?Was the 5 using the 16x2 lcd? 73 John N4HNO

Hi, I have a V3 in a Sunil case. I’m getting very bad audio feedback through both internal and external speakers when transmitting SSB. I’ve tried several mics, twisting cables, grounding everything,

hI ALL, Can anyone tell me what pin 16 state on the raduino is on receive and also on tx ?? voltage high or low in each case ?? Art G3XNE

Most all AGC circuits are either designed for the earlier versions or are no longer in production. Is there any AGC circuit designed specific to version 6 of uBitx that uses the 50k ohm volume pot in

I guess HF Signals must be pretty busy lately as it took 10 days to ship another V6 to me. But, DHL stepped up their game and I just got an "out for delivery" message for the package which was shipped

After trying 3 different software versions on my V6 uBitX I have been using Reed's R1.5.1 sketch the most as I like the way it handles while being easy to read. However, I would like to change the min

I am in need of some assistance in downloading new software. My new v6 does not now itself on. I am a newbee so any help will be appreciated.

Hi, Been a while since I last shared my progress. My goal here is to move the popular KD8CEC software to non-nano chips to allow faster processors with more memory to be used as a basis for future dev

Dear Ashhar and all, I was think on why the Raspberry Pi OS in the sBitx is not 64 bits. Is there any reason? At least for media intensive tasks (like FreeDV), software can benefit from using the arm6