I use omnirig with com3 to communicate with WSJTx but I cannot get Hamlib to connect -- John Faivre WA9SGD

Folks, I have the AmatuerRadioKits 3.5 Nextion case kit and a recent v5 ubitx. I’m trying to determine where to get the audio input for the audio amp board that comes with the kit. The picture in the

Hi, I have a uBitX to build over the Christmas period. I will be using the KD8CEC firmware and Nextion 2.8" screen Is there an easy way of altering the output power, short of dropping the supply volta

Howdy all, I did last night some key down test (keyed the radio with a straight key) into a dummy load and did some power measurements.. I am seeing a bit higher than expected power outputs on 12V and

To All, I am pleased with the results of my latest STM32F SDR Project which I have documented with this utube video: https://www.youtube.com/watch?v=D4lKBUj9MAw Regards. Charley

Sorry to post this here. Is there anyone here who belonged to the EMRFD yahoo group and was contacted by a Andrea Baldoni to join his group? Just wanting to find out if this is a valid group. Sorry fo

This is a follow-up to another thread that is months old. I'm now recovering from cervical spine surgery & attendant complications of infection, so I've had time to repeat tests though not necessarily

Please can somebody supply me with a working version of the above software I have corrupted mine and needless to say it's not working .l I have tried downloading the programs in github but have a few

Hello all, 25 more kits for the Digital Interface have been made available. This is a new revision to the board same layout and function with universal labeling and BOM. All boards labeled GLG v2.3 sh

Hi everyone looks like I have problem. I have RF output of about 5w when I key the mike with no modulation input. When I do speak into the mike the modulation is very distorted as heard on a local SDR

Hi Guys I am very happy with the information about the uBitx PA performance tested in Marianao, Havana Cuba by CM2KMK and CO2JT. Heriberto(CM2KMK) redo the uBitx PA board and tested with the Lagunero

I have an bitx v3 with stock firmware. It was working fine with good output on all bands. Very good receive. I did not use it for a couple of weeks then when I started to use it again receive was fine

Just came across a bit of news the might be of value to the bitx community. It seems that on May16th, NXP launched homebrew RF power amplifier design contest, utilizing their newMRF1-1AN or the MRF300

I was working through the "Tune Up" page at http://www.hfsignals.com/index.php/ubitx-tuneup/ with a bad antenna, and may have screwed up the settings. I know that my v5 has a BFO of 11.059MHz versus t

Dear OM Sodypop KJ6VGB, Any chance to join for discussion ? Best of 73s. Balsun. VU2UYC

Hello, I am attempting to compile the KD8CEC firmware for my stock uBITX with stock display, following the excellent instructions by Mike VK2DJP. But I get this error message : redefinition of 'char c

Hi Everyone! I'm radioamateur from Poland and now waiting for µBITX (is already in Poland at the customs office). I read the article on ubitx.net and I wonder if there are any topics here that I shoul

Are there files I can simply copy to a thumb drive and connect this thumb drive to the ubitx and allow it to update? I'm not understanding the procedures I see on the ubitx sites on how to update the

Dear uBITX enthusiasts. recently my uBitx transceiver has been finished. I find this project ufb because it is an excellent learning platform for me. As with many others, a number of modifications are

Time to give something back to the group. I was looking for a an audio AGC that did not require a mod to the ubitx bored (because I am a solder wimp and scared of cutting traces!). The very informativ