Can I signal any arduino pin to shutdown the screen in my ubitx v6? Thanks, Rafael PU2UIT

I would like to include some screen shots of my uBITX v6 display in a presentation. Taking pictures with a camera is tedious and doesn't give the best results. Is there some inexpensive software that

The TSW team is back to work after a holiday break. We have sold a number of our newest Teensy 4.1 Raduino kits and now we have some pretty stable and unique software available for it. With a small ha

Hi All While performing a mod on my uBitx v4 I have heat damaged 2 surface mount diodes D15 and D15. I want to replace them but cannot find the component values. On the Schematic it does not state the

Hello, Be careful if you use Kicad, the numbering is reversed compared to the Ubitx schema. Number one becomes number 16. So rotate the circuit 180% relative to the footprint on the PCB, Otherwise, it

I have a bitx-ver-3c-SBL with the 2 line LCD that is not working. I suspect it is the PIC processor as I tried other LCD. The symptom is no characters on the display. The unit work at one time years a

I would like to mock up the uBITX v6 Arduino and display on a breadboard for testing. I will actually be testing an Arduino Nano Every, which is supposedly pin for pin compatible. I purchased a "HiLet

Loris IW4AJR added folder /Some lists of various diodes. application note and data sheets

I bought the ubitx V6 complete kit and also the AGC board from kit-project.com. It was installed on the ubitx board as directed. A simple SPDT switch was attached to the board for OFF and FAST. A volt

Saw these, may be of interest... Pack of 10 - IRF3205 N Channel FET Transistor 55V sale price $2.95 https://mpja.us9.list-manage.com/track/click?u=2b09559a01d02ecc913387081&id=ca563cc1ba&e=42ba0e8752

Hi all, Calibration has been challenging for me. In case the below will be helpful, here is the procedure that has ultimately worked well for me. Thanks to Ian Lee (KD8CEC) for his nice firmware and u

Hi all, In order to do the rx/tx switch in a PA, I need a control signal for it. The most obvious is the PTT one, but as I'll be keying the radio over CAT, I think it is not a possibility, right?. Fro

Hello , do you have an ama zon account or can you help with a physical gift card ? Thanks .

The following files have been uploaded to the Files area of the BITX20@groups.io group. /USB_VOX_1_00.zip By: wb2cba@... Description: This zip file contains Gerber files,schematic, PCB layout and buil

HI GOOD DAY TO ALL. NEW YEAR GREETINGS FROM INDIA. Today(01.01.2021) I measured the SWR of my antenna system using ANTUINO ANALYZER. It is observed that there are very wide variations in the SWR value

Hello to the group: I ordered and assembled my new v6 kit, but I can't hear some noise from the bands, no sound. I try with various headphones and nothing. When I turn the volume pot sometimes I can h

Hi all, Is there any simple way (can be changing the firmware) to transmit a continuous tone, in order I can use it to adjust a power amplifier (I got a kit from aliexpress)? Btw, any guide on how to

Hi everybody, Did anybody managed to add a GPS to external referente the SI 5351? Cheers, Rafael PU2UIT

Hi there, I bougth a ubitx v6 basic kit, and I'm wondering what to do with the two parts cut with the shape of the ubitx? It there a "case guide" on how can I get my ubitx in a nice casing? And btw, i

hi i built the uBitx v6 transceiver last summer, tested it and then put it to one side while working on other projects, Now I have come back to it and expected it to work. Unfortunately when I connect