Topics

i2c signal meter/analyser/dsp/cw decoder

Sourav
 

Hi,

 

Can anybody pl confirm which firmware .hex to run the DSP signal meter & CW decoder option .

I use nextion adv 3.5”.

Fyi, the S-meter function works normally, but DSP1 & CW setup buttons don’t appear on the control menu ??!!

 

I’m using –

#for 1st Arduino (ubitx):            UBITX_CEC_V1.200_NX_S.hex  (tried v1.097 & v1.10 too !!)

 

#for 2nd Arduino (sig.sensor):   I tried all the below found online, but w/o success

CEC_I2C_Meter_V0.8.hex

DSPMeter1_V0.7.hex

i2cmeter1.ino.hex

 

In dspmeterv1-master uploaded few days back ( https://github.com/phdlee/dspmeterv1) there’s no .hex files !!

 

All wiring as per-

Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #2 - Nextion LCD

Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #3 - Advanced and FFT

 

73s,

Vu3Cgb- Sourav

 

A circuit board

Description automatically generated   A circuit board

Description automatically generated

 

A picture containing black, top

Description automatically generated

Vic WA4THR
 

To get  those extra buttons and some other updated features like the CW speed arrows on the main screen you need to update the Nextion GUI. Look for "UBITX_Nextion_GUI_V3.zip"

=Vic=

Kelly Mabry
 

Vic and Sourav, thank you for posting this as I have the exact same problem... thank goodness for this forum!
73, 
Kelly K5AID 

Sourav
 

Thanks Vic,
I modified the GUI from- ubitx_35E6.tft  to  ubitx_35_E.tft  and its solved now...
Non the less I only get half of the nextion screen filled !!

Regards,
Sourav 
image1.jpeg

image2.jpeg

image3.jpeg

On 16-Apr-2019, at 3:15 PM, Vic WA4THR via Groups.Io <vhklein@...> wrote:

To get  those extra buttons and some other updated features like the CW speed arrows on the main screen you need to update the Nextion GUI. Look for "UBITX_Nextion_GUI_V3.zip"

=Vic=
_._,_._,_

From: Sourav <sourav.relja@...

Sent: 15 April 2019 10:56 PM
To: 'BITX20@groups.io' <BITX20@groups.io>
Subject: i2c signal meter/analyser/dsp/cw decoder 
Importance: High

 

Hi,

 

Can anybody pl confirm which firmware .hex to run the DSP signal meter & CW decoder option .

I use nextion adv 3.5”.

Fyi, the S-meter function works normally, but DSP1 & CW setup buttons don’t appear on the control menu ??!!

 

I’m using – 

#for 1st Arduino (ubitx):            UBITX_CEC_V1.200_NX_S.hex  (tried v1.097 & v1.10 too !!)

 

#for 2nd Arduino (sig.sensor):   I tried all the below found online, but w/o success

CEC_I2C_Meter_V0.8.hex 

DSPMeter1_V0.7.hex 

i2cmeter1.ino.hex

 

In dspmeterv1-master uploaded few days back ( https://github.com/phdlee/dspmeterv1) there’s no .hex files !!

 

All wiring as per-

Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #2 - Nextion LCD

Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #3 - Advanced and FFT

 

73s,

Vu3Cgb- Sourav,_._,_

Matt 9V1MH / VK3AMH
 

Hi

when you say modified what do you mean - what steps did you take?
when I was resizing - it was important to note that the image files need to be the coirrect size resolution for the display
see the nextion site for the actual resolution per display
and i also had to resize the area of the background image in the nextion editor to cover the whole display
if you do not resizze the display area then the image is fitted into a smaller area
this is independent of selecting a ddifferenty size device in the setup - as this only resizes the canvas - not the elements

Matt

Sourav
 

Hi Matt,

Pl note i chkd in the editor app that ubitx_35E6.hmi (which was originally written for 3.5" 320x480 res.) didnt hav the 13th& 14th pages- pdsp & pcw mean for dsp & cw setup. 

Whereas the ubitx_35_E.hmi did hav these pages but was scaled down to 240x320

So, i saves these two pages and then imported them into ubitx_35E6.hmi...compiled & saved as .tft via 'open build folder' tab

But the res. remained 240x320 half filled in my 3.5" screen.
So, now i'm  again editing the background templates to 320x480 and repositioning the buttons/attributes !

NexEditior is pretty interesting, u can do whole lot of customisations....

73s
Sourav_Vu3Cgb

On 17-Apr-2019, at 9:29 AM, Matt 9V1MH / VK3AMH <matthoward.sg@...> wrote:

Hi

when you say modified what do you mean - what steps did you take?
when I was resizing - it was important to note that the image files need to be the coirrect size resolution for the display
see the nextion site for the actual resolution per display
and i also had to resize the area of the background image in the nextion editor to cover the whole display
if you do not resizze the display area then the image is fitted into a smaller area
this is independent of selecting a ddifferenty size device in the setup - as this only resizes the canvas - not the elements

Matt

Werner de Vos
 

Hi Sourav, did you already managed to get it working in full screen? Having the same 'problem' here. 
73 Werner pa3gyv