Topics

Need Raduino for bitx 40 #bitx40 #radiuno

support@...
 

Hello Jason,

If you are still wanting a Raduino for your Bitx 40 please do let us know. Send a mail to support@... and we shall make it available for you.

Regards,

Thomas
--
Support@...

MVS Sarma
 

BUT YOU SHOULD MENTION the need is for old raduino not ver6 as they sell ver6 at 40$ odd.
Send a clear message with or without 16*2 display.
Sarma vu3zmv

On Tue, 10 Mar 2020, 11:01 pm Jason Pirok, <jason.pirok@...> wrote:
I sent a message to the email address that you suggested. Thanks!

On Tue, Mar 10, 2020 at 1:21 PM MVS Sarma <mvssarma@...> wrote:
When we go to hfsignals sie, cluck menu and help.  Tere they gave communicatio mail address  
We can orderafter inquiring there. 
I shall get specific details ina day. 

Sarma vu3zmv

On Tue, 10 Mar 2020, 7:04 pm Gordon Gibby, <docvacuumtubes@...> wrote:
Sarma, I haven’t seen a link On hfsignals for that in a long time. That was why I created my own printed circuit board.   Do you have a link that would help this gentleman out?


On Mar 10, 2020, at 09:32, MVS Sarma <mvssarma@...> wrote:


Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site



--
Jason Pirok
W4UNX

Jason Pirok
 

I sent a message to the email address that you suggested. Thanks!


On Tue, Mar 10, 2020 at 1:21 PM MVS Sarma <mvssarma@...> wrote:
When we go to hfsignals sie, cluck menu and help.  Tere they gave communicatio mail address  
We can orderafter inquiring there. 
I shall get specific details ina day. 

Sarma vu3zmv

On Tue, 10 Mar 2020, 7:04 pm Gordon Gibby, <docvacuumtubes@...> wrote:
Sarma, I haven’t seen a link On hfsignals for that in a long time. That was why I created my own printed circuit board.   Do you have a link that would help this gentleman out?


On Mar 10, 2020, at 09:32, MVS Sarma <mvssarma@...> wrote:


Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site



--
Jason Pirok
W4UNX

MVS Sarma
 

When we go to hfsignals sie, cluck menu and help.  Tere they gave communicatio mail address  
We can orderafter inquiring there. 
I shall get specific details ina day. 

Sarma vu3zmv

On Tue, 10 Mar 2020, 7:04 pm Gordon Gibby, <docvacuumtubes@...> wrote:
Sarma, I haven’t seen a link On hfsignals for that in a long time. That was why I created my own printed circuit board.   Do you have a link that would help this gentleman out?


On Mar 10, 2020, at 09:32, MVS Sarma <mvssarma@...> wrote:


Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site

Gordon Gibby
 

Great option!!  Thanks for sharing


On Mar 10, 2020, at 12:18, q q via Groups.Io <bzmdrc@...> wrote:

I have the QRP-Labs VFO kit on my Bitx40 from day one and it works very well.  I've set it up to calibrate withe a GPS 1PPS and all is good.

Bob, W1EXZ

q q
 

I have the QRP-Labs VFO kit on my Bitx40 from day one and it works very well.  I've set it up to calibrate withe a GPS 1PPS and all is good.

Bob, W1EXZ

MVS Sarma
 

Now that you are kind to support him, perhaps no point in searching. However i shall
 Regards to great designer. 

Sarma

On Tue, 10 Mar 2020, 7:04 pm Gordon Gibby, <docvacuumtubes@...> wrote:
Sarma, I haven’t seen a link On hfsignals for that in a long time. That was why I created my own printed circuit board.   Do you have a link that would help this gentleman out?


On Mar 10, 2020, at 09:32, MVS Sarma <mvssarma@...> wrote:


Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site

Gordon Gibby
 

Sarma, I haven’t seen a link On hfsignals for that in a long time. That was why I created my own printed circuit board.   Do you have a link that would help this gentleman out?


On Mar 10, 2020, at 09:32, MVS Sarma <mvssarma@...> wrote:


Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site

MVS Sarma
 

Last Sunday we had a monthly get together of Lamakaan amateur radio club, Hyderabad, India.   I raised this topic with Asher Farhan, he replied that they can order Raduino from
HFsignals.com. the hardware is same for bitx40 or ubitx v3, 4, 5.
For bitx 40 they can load the original firmware with analog tuning pot.
Hope this serves the need of friends who need a raduino for their BITX40.
regards
sarma
 vu3zmv.


On Tue, Mar 10, 2020 at 4:15 PM dave <dgclifford@...> wrote:
bought mine from ash farhan site

Gordon Gibby
 

I think you have to recognize that this is somewhat like asking someone to sell you their intermediate frequency amplifier, or, perhaps the fuel injector out of their automobile.  

This is not the same as asking someone to sell you an aftermarket spray can of matching color.  This is an Integral  part of the entire device, and the entire device is a kit.    So one might reasonably expect to have to do a bit of work to replace a portion of a kit that had gone bad, if the manufacture no longer stocks that fuel injector!

I provided you with information on how you could build your own, and I suspect there are other possibilities offered if you look around, but the rest is somewhat up to you.  You’ve had and offer of the entire automobile, which is quite reasonable, but no one yet is offering to rip the fuel injector out of their working vehicle to help you.   They may have course and that’s their business.   

I think you’ll benefit more if you take the time to understand how all this works,  which is one of the goals of 97.1






On Mar 10, 2020, at 09:14, kf4mot@... wrote:

I have a couple complete bitx40's I'm willing to sell. Then you'd have the problem of a leftover main board though :)

Julian,
Kf4mot

kf4mot@...
 

I have a couple complete bitx40's I'm willing to sell. Then you'd have the problem of a leftover main board though :)

Julian,
Kf4mot

Jason Pirok
 

Been googling for weeks. There's some unknown guy selling a clone on Ebay, I don't trust that. Ashar Farhan's site doesn't sell the original Raduino, They just have the new LCD one that will not fit the case I have. W0EB is not selling them anymore. I don't have the facilities to do much building right now, so my options are, a kit (I haven't found one) or fully assembled. If anyone can respond with a link to one of those two I would appreciate it (even if I have to buy the components individually.)


On Tue, Mar 10, 2020 at 7:06 AM Gordon Gibby <docvacuumtubes@...> wrote:
You can build your own, or there are multiple compatible systems for sale.  Here's a version I created for my own uses  https://www.qsl.net/nf4rc/Tech/BeginningSWRBoardFinalV11.dip   Google a bit and youll find competitive products that will meet your need.  

73
Gordon


On Sat, Mar 7, 2020 at 7:03 PM Jason Pirok <jason.pirok@...> wrote:
Wow. Nobody with one of these for sale? I don't want it for free. Who has one they can part with?



--
Jason Pirok
W4UNX

Gordon Gibby
 

You can build your own, or there are multiple compatible systems for sale.  Here's a version I created for my own uses  https://www.qsl.net/nf4rc/Tech/BeginningSWRBoardFinalV11.dip   Google a bit and youll find competitive products that will meet your need.  

73
Gordon


On Sat, Mar 7, 2020 at 7:03 PM Jason Pirok <jason.pirok@...> wrote:
Wow. Nobody with one of these for sale? I don't want it for free. Who has one they can part with?

dave
 

bought mine from ash farhan site

Jason Pirok
 

I haven't been able to find even that for sale. amateurkits.in, hfsigs, amazon

MVS Sarma
 

There is no hardware difference in the board. The stock formware of bitx40 can be loaded in unitx raduino. I suppose many who changed over to other hardware would offer ubitx raduino, instead. While using, we can identify the pin details and use potentiometer nethod of tuning, instead. 

Approach this way.  All the best.
Sarma vu3zmv

On Sun, 8 Mar 2020, 5:33 am Jason Pirok, <jason.pirok@...> wrote:
Wow. Nobody with one of these for sale? I don't want it for free. Who has one they can part with?

Jason Pirok
 

Wow. Nobody with one of these for sale? I don't want it for free. Who has one they can part with?

Jason Pirok
 

I need a Raduino or Raduino clone that I don't have to do work to in order to get it to work correctly with the bitx40. I've been to W0EB's site and I will NOT order there. All other suggestions entertained.

Thanks