Topics

How to order a Raduino

kir@...
 

Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino. How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

Michael Hagen
 

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:
Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino. How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...

Tim Gorman
 

Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's a
mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:
Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

Michael Hagen
 

I did it on an old Allard version.  Use the library that is available, and edit the prints to the LCDs.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

Set up LCD and its I2C address.

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

My boards got a dedicated 4 Pin Molex for I2C at 5V.

Find the library and run some examples to get started.


73's Mike


On 3/8/2018 1:09 PM, Tim Gorman wrote:
Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's a
mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a 
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:
Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR


      





-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...

Tim Gorman
 

Thanks, Mike.

I just sent you some money for one of your assembled ubitx boards. I
could assemble it myself but I just don't know where to get the time!

tim ab0wr

On Thu, 8 Mar 2018 14:07:47 -0800
"Michael Hagen" <motdog@...> wrote:

I did it on an old Allard version. Use the library that is available,
and edit the prints to the LCDs.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

Set up LCD and its I2C address.

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

My boards got a dedicated 4 Pin Molex for I2C at 5V.

Find the library and run some examples to get started.


73's Mike


On 3/8/2018 1:09 PM, Tim Gorman wrote:
Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C
lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's
a mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:
Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR


clyde-alex@...
 

I would like very much to order one of these.
please email me.
I am good on qrz
--
73
clyde
kk4ywi

Geoff Theasby <geofftheasby@...>
 

Hi Mike,

I would like to order an assembled  Raduino UMax. First, can I check whether it is preprogrammed so I can plug in and go? As Nano is extra, does this mean it isn't?

I have the LCD.

73,
Geoff , G8BMI