Update. The issue has been resolved. I gave it to other Ham. He did not find anything wrong he made modifications as in V5 and its working again.

#ubitx #v3 #power

Mic element, as mentioned in original post, is ok. No circuit modification done. I reflashed the firmware, did not solve the issue. It is hardware related, somwhere in SSB chain.

#ubitx #v3 #power

As mentioned in original post, CW works fine gives 5w out on 40m. Yes i am aware of static voltages. I will try to measure them without blowing anything.😀😀

#ubitx #v3 #power

Rx seems ok. Some stations come strong. Some weak. Antenna is EFHW in sloper configuration. Dont know how sensitive is the ubitx reciver. But i can definitely hear the strong stations clearly some 5/9

#ubitx #v3 #power

BTW when i say no power i mean zero power (no means to measure miliwatts). With my limited knowledge i think, SSB signal is generated, converted to RF signal but that RF signal is not getting amplifie

#ubitx #v3 #power

Thanks Evan for prompt reply, but i dont think mic drive is an issue here because with the same setup earlier it was pushing 5 to 7 watts on ssb. Then it was sitting idle for 5-6 months away from any

#ubitx #v3 #power

When i keep my other SSB reciver in the room and talk, i can hear my voice on that receiver. But watt meter show no power. What is the problem? Which part do i need to check?

#ubitx #v3 #power

Can anyone tell me what the problem is? Problem: no power in SSB mode. Ubitx V3 When i push the ptt the rig go into tx, i can hear the relay clicking, current draw increases to 680mA. But on talking n

#ubitx #v3 #power