Hi I am adding one of these ebay pa’s. To check the power, I would like a continous output. If I go in CW mode and press and hold PTT my ubix starts “morsing”. Why and what do I do? 73, Ole

Hi Andy Try this: 73, Ole

Have you connected the tuning knob to the right connector - the one at the Arduino, not the one just behind the front to the right at the PCB??

Hi On my v6 80 m worked fine, but 20 m was warbling. I tuned and then both worked, pretty straight forward.. Best regards, Ole

At least the date is easy to translate: April 1st..... //Ole

Hi As for the LPF, there are lots available on ebay and aliexpress. Almost all have relays for band selection. As ubitx cannot control these, then you have to select the right band by means of some sw

Hi Jeff Looks promising! I will give it a shot tonight. Thanks a lot! Best regards, Ole

My v6 works fine on 80 m, but LSB/USB selection does not make any difference. On 20 m signals are garbled and does not change with LSB/USB setting. Factory sw/settings used. Hints? 73, OZ6TI

Hi Quick question. Lot of talk about the S-meter. How do get access to it? 73, OZ6TI

#v6

Hi What is the RF output impedance of the uBITX, v6? just became owner of the new baby, soon QRV, I hope :-) vy 73 de OZ6TI

#antennas #ubitxv6