|
BITX 40 Kit Build
#bitx40help
#bitx40
This kind explanation is great! Keep it up for those of us who are a little dense. I wish my wife would give instructions this clear in a voice my old ears would adequately hear. David J. Wilcox K8WPE
This kind explanation is great! Keep it up for those of us who are a little dense. I wish my wife would give instructions this clear in a voice my old ears would adequately hear. David J. Wilcox K8WPE
|
By
...
· #77900
·
|
|
Hamstick Mag Mount
You haven’t mentioned what could be done after dark. There are lots of options for putting up wires, radials, etc., after dark and removing them after the fun is done. Radials laid on the floor of you
You haven’t mentioned what could be done after dark. There are lots of options for putting up wires, radials, etc., after dark and removing them after the fun is done. Radials laid on the floor of you
|
By
...
· #77719
·
|
|
uBitX CEC v 1.1 Iambic A not working
Hi Bill, Will have to check that with a keyer. I thought the CEC firmware had that fixed without extra resistors. Two other folks advised the resistors and supplied the diagram. It works fine on cw an
Hi Bill, Will have to check that with a keyer. I thought the CEC firmware had that fixed without extra resistors. Two other folks advised the resistors and supplied the diagram. It works fine on cw an
|
By
...
· #77549
·
|
|
uBitX CEC v 1.1 Iambic A not working
I am a newbie to the uBitX but have been following this group for a few years. I was able to pick up a uBitX v3 with the touch screen and CEC v 1.1 installed while at HamCation this winter. It works w
I am a newbie to the uBitX but have been following this group for a few years. I was able to pick up a uBitX v3 with the touch screen and CEC v 1.1 installed while at HamCation this winter. It works w
|
By
...
· #77543
·
|
|
Antenna Question
#antennas
#v3
I have a Cyclone kit unbuilt that I will part with. If anyone is interested contact me in 2 weeks when I am back home in Michigan. Dave K8WPE djwilcox01 At aol.com David J. Wilcox K8WPE’s iPad
I have a Cyclone kit unbuilt that I will part with. If anyone is interested contact me in 2 weeks when I am back home in Michigan. Dave K8WPE djwilcox01 At aol.com David J. Wilcox K8WPE’s iPad
|
By
...
· #77176
·
|
|
#v6 side tone too loud
#v6
I always keep a couple of inexpensive ear phone extension cords with built in volume controls available from Amazon and EBay. Cheap, handy, and no mods. I just need another hand to control the volume.
I always keep a couple of inexpensive ear phone extension cords with built in volume controls available from Amazon and EBay. Cheap, handy, and no mods. I just need another hand to control the volume.
|
By
...
· #77054
·
|
|
Power requirement
I have a friend who flies expensive drones and gives me his battery packs when they start showing trouble or bulging. Usually only one cell is going bad so after dissecting 3 or 4 packs I have all the
I have a friend who flies expensive drones and gives me his battery packs when they start showing trouble or bulging. Usually only one cell is going bad so after dissecting 3 or 4 packs I have all the
|
By
...
· #77053
·
|
|
Thank you
To pay it back, study, learn all you can, rub shoulders with other Elmers, and don’t be afraid to tell about your mistakes. Then when you find other like minded new hams introduce yourself and make yo
To pay it back, study, learn all you can, rub shoulders with other Elmers, and don’t be afraid to tell about your mistakes. Then when you find other like minded new hams introduce yourself and make yo
|
By
...
· #77016
·
|
|
Ordered ubitx6
I am on the 3rd floor of a 4 story condo and find that the steel in the floor and ceiling of our deck plus the screen (stucco) in the sides of the building reduce my signal significantly. So hope you
I am on the 3rd floor of a 4 story condo and find that the steel in the floor and ceiling of our deck plus the screen (stucco) in the sides of the building reduce my signal significantly. So hope you
|
By
...
· #76834
·
|
|
uBitx v6 low ssb transmit rf output low, CW works OK
#ubitx
#v6
#ubitx-help
That is typical of ALL the Chinese microphones I have ever seen. Always open them up and look to see that the mic capsule is free and unhindered. David J. Wilcox K8WPE’s iPad
That is typical of ALL the Chinese microphones I have ever seen. Always open them up and look to see that the mic capsule is free and unhindered. David J. Wilcox K8WPE’s iPad
|
By
...
· #76267
·
|
|
Portable antenna(s) #antennas #v6 (portable antennas)
#v6
#antennas
If you want to read some very interesting information and research about portable antennas let me steer you to Myron, WV0H’s web site: https://wv0h.blogspot.com/2019/10/hiatus.html?view=sidebar Look a
If you want to read some very interesting information and research about portable antennas let me steer you to Myron, WV0H’s web site: https://wv0h.blogspot.com/2019/10/hiatus.html?view=sidebar Look a
|
By
...
· #76143
·
|
|
new inexperienced technically challenged builder basic Questions
David, You and your father should start with simple kits from the QRP Guys, W8DIZKs site, Kitsandparts.com, and maybe even QRP Labs. They all provide beautiful instructions and back up. For a first ri
David, You and your father should start with simple kits from the QRP Guys, W8DIZKs site, Kitsandparts.com, and maybe even QRP Labs. They all provide beautiful instructions and back up. For a first ri
|
By
...
· #76114
·
|
|
Tuning knob behavior
I don’t trust the stick on rubber feet so I use a drop of super glue gel on each one I install. I do the same with those stick on pads you put on the bottom of the feet of chairs to keep them from scr
I don’t trust the stick on rubber feet so I use a drop of super glue gel on each one I install. I do the same with those stick on pads you put on the bottom of the feet of chairs to keep them from scr
|
By
...
· #76029
·
|
|
V3 CEC 1.1 question
I recently purchased (at HamCation) a uBitX ver 3 upgraded to the CEC ver 1.1 and the 2.8 Nextion screen. It is my first experience with a working uBitX but this one only transmits in straight key mod
I recently purchased (at HamCation) a uBitX ver 3 upgraded to the CEC ver 1.1 and the 2.8 Nextion screen. It is my first experience with a working uBitX but this one only transmits in straight key mod
|
By
...
· #76015
·
|
|
How Come?
I thought I had looked at all those links when I started down this rabbit hole a few years ago. Sorry, my wife (my right seat pilot) doesn’t look over my shoulder when I am reading ham radio emails. T
I thought I had looked at all those links when I started down this rabbit hole a few years ago. Sorry, my wife (my right seat pilot) doesn’t look over my shoulder when I am reading ham radio emails. T
|
By
...
· #75876
·
|
|
How Come?
How come I never saw any reference to this site before and I have read all the uBitx emails and joined github just to keep up for the day I would finally get the courage to jump in and tinker with one
How come I never saw any reference to this site before and I have read all the uBitx emails and joined github just to keep up for the day I would finally get the courage to jump in and tinker with one
|
By
...
· #75846
·
|
|
#v6 Missing Parts
#v6
This item and the replies are very interesting. My experience with most kits is that I get extra parts, especially nuts and bolts. They go to my junque box. Also if your children or grand children eve
This item and the replies are very interesting. My experience with most kits is that I get extra parts, especially nuts and bolts. They go to my junque box. Also if your children or grand children eve
|
By
...
· #75798
·
|
|
SVHFS 2020 Conference Announcement & Call For Papers/Presentations
Also make sure that you are talking DIRECTLY to the hotel you want to stay at, not some other booking agency. Recently we went through Booking.com (because their site came up first) and when we got to
Also make sure that you are talking DIRECTLY to the hotel you want to stay at, not some other booking agency. Recently we went through Booking.com (because their site came up first) and when we got to
|
By
...
· #75093
·
|
|
New uBITX Ver. 6 Assembled Today
OK. I downloaded the program in Chrome on my iPad Pro and get the very same thing I saw during the regular down load.... instructions but no program to generate to es or what ever it is supposed to do
OK. I downloaded the program in Chrome on my iPad Pro and get the very same thing I saw during the regular down load.... instructions but no program to generate to es or what ever it is supposed to do
|
By
...
· #74143
·
|
|
New uBITX Ver. 6 Assembled Today
So this won’t work on an iPad Pro? All I get is some instructions, but no working program. Does this require an Android phone? David J. Wilcox K8WPE’s iPad
So this won’t work on an iPad Pro? All I get is some instructions, but no working program. Does this require an Android phone? David J. Wilcox K8WPE’s iPad
|
By
...
· #74140
·
|