Hi, yes I confirm/agree the effectiveness of the KD8CEC Memory Manager to select transmit offset according to sidetone frequency (drop me a message if you need more infos). And I also had exactly the

#bitx20help

Hi Reg, I just finished today to fit the Sotabeams in my uBitx case. I used the genuine audio output (yellow wire) of the uBitx, to feed the Sotabeams filter (audio In), connected along with the "V" o

Hello Reg, thank you so much for the wiring sketch, it will for sure be a great help ! I think you are right: I should be able to insert the filter between the AGC yellow wire and its final destinatio

Hi Reg, tnx for your reply; I saw this LED AGC, running at audio stage, before choosing this one, running at RF stage: https://shop.kit-projects.com/index.php?route=product/product&product_id=101 I'm

Hi Reg, sounds great, as the uBitx lacks a good CW filter (the provided one is set for SSB, that is much too wide when chasing for DX stations listening up...about 1Khz, right in the audio response :(

Hi, well I finally hooked up my headphones output to FlDigi, and that confirmed my uBitx's BFO was off, giving an audio about 300Hz too high, which I corrected successflully via the setting BFO menu (

Hello Adrian, a good avdice, I'll try this this week-end, as I need to bypass first my AGC board from kit-project (soldered on the slow agc position), who changes a littke the overall audio response..

Hello, thank you all for your excellent replies: I'm going to make the BFO calibration procedure, and listening by myself on my good old DEGEN 1103 chines receiver. And yes, I was surprised at first b

Hi there uBitx owners, today a ham confirmed me that my modulation was only in the treble part of the audio spectrum: no bass and (that the most annoying) no medium frequencies to hear... I wonder if

Hello Ian, may be you could try this speech process circuit if you haven't seen it yet: http://bitxhacks.blogspot.com/ (look at the bottom of the page) I hope to find some time to test it in the futur

Hello Scott, happy your uBitx finally started with KD8CEC software ! He actually made a GREAT job to bring new features and ease of use. Good luck for your next display build :) 73

Hello Scott, it seems we ran into the same troubles :) Well, after digging a little in the code, I found that the current release set by default another display that the default 1602: to get it run, y