Mike, if you still have it email me at my email address on QRZ.com.

#v4

I have the case also https://amateurradiokits.in/product/874/. I also started the Allard mods. How about $60?

#v4

How much for the Bitx 40?

#v4

I found it. I also have a bitx 40

#v4

Now I can’t find it. If I do, yes I will ship to AU.

#v4

Would you ship to Australia? 73 Paul VK2FPAD

#v4

V4 with mods to add JackAl board. All parts that come with it, and W0EB Raduino clone. $80 OBO mike AI4NS

#v4

Send me your mailing address at shytron@.... I have some extra boards. You will enjoy the learning experience.

#v4 #v5 #bitx20 #bitx40 #v3

OM Given your programming interest, consider an older v3, v4 or v5 at a good price. The v3 and v4 do well with some relay surgery to address spurious. If nothing comes available, then order a v6 when

#v4 #v5 #bitx20 #bitx40 #v3

Hi Victors, thanks for the links. I’d seen that site but couldn’t work out what you actually get or even what some of the boards are for. I’ll email them for some clarification. I’ll look out for the

#v4 #v5 #bitx20 #bitx40 #v3

Hi Curt, I’ve wanted to get my licence since I was a kid, but it was a lot harder then and I was distracted by other interests... It’s a through hole construction that I was looking for. I’ve done a f

#v4 #v5 #bitx20 #bitx40 #v3

Here's a link for the boards, which have thru hole component assy. https://amateurradiokits.in/store/printed-circuit-boards/ The country they're shipped from is on lockdown but should resume before to

#v4 #v5 #bitx20 #bitx40 #v3

Fantastic on your launch into ham radio. If you were able to get a bare board, I doubt you could easily purchase the components for less than a completed board. The board is arranged for automated sur

#v4 #v5 #bitx20 #bitx40 #v3

Hi, I'm new to this group. Sorry if this has been asked many times - the only answers I can find are a couple of years old. I'd like to build from bare PCB a BITX40 or BITX20 (or even an earlier uBITX

#v4 #v5 #bitx20 #bitx40 #v3

I used the same technique as Karol on my V4, but using the circuit from the July 2019 QST article. Using the circuit as a preamp fixed the low audio common with the V4 and provided a very good AGC. I

#ubitx #v4

Thank-you Karol! I had not thought to use this module in this way. I will try it out on my rigs to see how it works for them. I am glad that you found the problem with your rig. 73 Evan AC9TU

#ubitx #v4

welcome back The case turned out to be very simple. During tests, the L5 mechanical coil was damaged. The receiver worked but very poorly. I repaired the electrical connections of the coils and additi

#ubitx #v4

Does the radio receive work? If so, then the BFO and the diode IC are OK, as it is used for both transmit and receive. Since the problem started after making the modification for the AGC, can you undo

#ubitx #v4

Hi Thank you Sarma vu3zmv for the answer. I do not have such a diode on hand, but I soldered the current one and the measurement indicates that it is probably working. I didn't mention it before but I

#ubitx #v4

Karol,pkeease tryvto check and replace if faulty bat54s at demod level. This is an smd with 2 diodes in series. All the best Sarma vu3zmv

#ubitx #v4