John, For the v6 you hold in the encoder to get to the setup menu. It is demonstrated in the calibration video by Ashhar Farhan. https://www.youtube.com/watch?v=t6LGXhS4_O8 73 Evan AC9TU

#ubitxcw #ubitx #cw

Jeff, I got tired of buying D cells and figured I’d take a chance. For a change, I got a pleasant surprise! I use full-cover earphones with my uBITX v6.1. Even when I wear my hearing aids and the earp

#ubitxcw #ubitxv6

Here is the implementation of the TenTec variable filter in my TenTec Rebel. Looks easy and works great. Jim KH6SKY

#ubitxcw #cw #ssb

hello, i am using nextion display on my ubitx and i have the spare pins free from my other display, i want to use them for iambic keyer insted of A6 with resistors. can anyone help me with the changes

#bitx40 #bitx40help #ubitxcw #bitx20 #ubitx-help

Found the problem with the transmit with trailing tone. In memory manager you can set CW DELAY (TX-RX) and it was set to 0. One would assume no delay. Not true, it must use some system default. Changi

#ubitx-help #cw #ubitxcw

Mark I just pulled up excel to do a quick calculation. The time constant for an RC circuit is T = 1 / (R*C). note this is the time to reach 67% of steady state value, but gives us a feel for responsiv

#ubitxcw

Symptom: uBITX doesn't recognize the straight key. Electrically, the CW key line checks OK. Solution: Go to settings->CW->Hand key[Select]

#ubitxcw

Oh sorry, forgot to mention. This is not an audio filter, but a second crystal filter chain on 4MHz while the CW wide and SSB filter is at 12MHz. Alex

#ubitxcw

Just to let you know I have managed to change the CW Tone using the encoder push switch method. I started the memory manager and uploaded from the uBitX. The CW setup table in the KD8CEC firmware now

#ubitx-help #ubitxcw #calibration

Sounds great Sam! 73, Kelly KD5AJ

#ubitxcw

Tom, Dead on. DC votlage to the radio has a very large impact on power out. All the work done back last May I included that as many has the Wbrand audio chip that would fry at 13V and they would know

#ubitxcw

I just added another connector with the two resistors so I wouldn't have to adapt the cable of my paddle. Guess somehow it should be 'doable' to automate the detection key or paddle as the measured va

#ubitxcw

Shortly after I worked him, another CT9 call (I didn't write it down) was being used so I suspect he was operating from a local ham station somewhere on Madeira. I don't think it was a DXpedition, jus

#ubitxcw #ubitx

I have a 3.5 and am patiently waiting on Alan Merrill to update the 3.5 lcd. You can load the released Hmi/tft but will only fill out 3/4 of the larger lcds

#ubitx #ubitxcw #ubitx-help

my uBitx audio filter: https://www.youtube.com/watch?v=v4_XrLQKBTU&t=28s

#ubitx #ubitxcw

After watching Ian's video (https://www.youtube.com/watch?v=a4au90STsdY), it was quite easy to establish control of the uBITX via CAT using Fldigi. In the video, Ian demonstrates keying the mic via th

#ubitx #ubitxcw

Michael, We're you able to get a copy of 1.095 and if you did do you have a link for it? I'm running 1.094 but would like the CW shift feature in ubitx manager. 73 Don Meyerhoff WA2SWX

#ubitxcw

I just made my first CW contact with my uBITX! Up until now I have been hesitant to try it because the click/pop was disruptive, but I built and installed the K5BCQ/VA7AT/ND6T click fix kit and now I'

#ubitx #ubitxcw

Nice job! Did you try to capture two consective dits? Just to make sure the trailing edge was being completed well before the next beginning edge? If it is then just adding this capacitor would work f

#ubitxcw #ubitx

Tom, I checked the box and left the setting at 0. Now, when I switch to CWL the readout shows the correct transmit frequency. Dan, W2DLC

#radiuno #ubitx #ubitxcw #firmware