Ashok jee i have ad9850 modules 3 row version . I can send if you want. I am located at hyderabad. Regards sarma vu3zmv

#si5351 #rf #signal

Ashok, I just got a postal delivery of some parts ordered a few months ago. This means you can order. Raj

#si5351 #rf #signal

Thanks to all for your valuable feedback. I am going with SI5351 for now as I have it with me. I will be careful during measurements. This is only option left now as not possible to acquire AD98XX dev

#si5351 #rf #signal

The AD9833 set to givea a sine wave output might be a better choice but is limited to 12.5MHz. Bob GM4CID

#si5351 #rf #signal

On most signal generators the sine wave only survives until you connect it to something. Maybe a receiver input would retain the sine wave, but if the signal generator is driving a diode that would di

#si5351 #rf #signal

Well, if you know to expect it, you can ignore it. No test instrument is perfect and truthful all work with limitations. To circumvent the harmonic problems, I built the Antuino. - f

#si5351 #rf #signal

I think the results would be too confusing if used as a signal generator. I use one here as an analogue vfo replacement, but I used a low pass filter on the output so I get the same sine wave out of i

#si5351 #rf #signal

Thanks a lot Farhan, I always liked your straight on the point replies. I got it. Regards Ashok Das

#si5351 #rf #signal

You have to be careful of false responses. Let's imagine you are testing a bandpass filter at 6 mhz. As the si5351 sweeps from 1 mhz to 10 mhz, at 2mhz, the si5351's output will also contain 6 mhz har

#si5351 #rf #signal

Hi all, I was hoping to make a RF signal generator using SI5351. Similar projects already done as I found in internet. https://kk9jef.wordpress.com/2017/07/10/si5351-signal-generator/ https://wb8nbs.w

#si5351 #rf #signal