|
Need Raduino for bitx 40 18 messages
#radiuno
#bitx40
Hello Jason, If you are still wanting a Raduino for your Bitx 40 please do let us know. Send a mail to support@... and we shall make it available for you. Regards, Thomas
Hello Jason, If you are still wanting a Raduino for your Bitx 40 please do let us know. Send a mail to support@... and we shall make it available for you. Regards, Thomas
|
By
Support HF Signal
·
|
|
sketch dds-vfo by eZall for bitx40 3 messages
#arduino
#bitx40help
#radiuno
#smeter
yes it's him! Thanks so much
yes it's him! Thanks so much
|
By
SaMa photo SaMa photo
·
|
|
sketch encoder bitx40 by eZall
#smeter
#arduino
#bitx40help
#radiuno
Good morning I can no longer find the specifications of the s-meter of the sketch of eZall with encoder I installed his sketch on my bitx40 and it works really well! It is already set up for s-meter,
Good morning I can no longer find the specifications of the s-meter of the sketch of eZall with encoder I installed his sketch on my bitx40 and it works really well! It is already set up for s-meter,
|
By
SaMa photo SaMa photo
·
|
|
New adapter kit from TSW 11 messages
#radiuno
#ubitx
Hey Jim, I see that the current TSW firmware available for the T4 is essentially the "stock" uBITX firmware. Is there a plan to port any additional code (primarily, display code) from the Biteensio ef
Hey Jim, I see that the current TSW firmware available for the T4 is essentially the "stock" uBITX firmware. Is there a plan to port any additional code (primarily, display code) from the Biteensio ef
|
By
Rob French (KC4UPR)
·
|
|
error : redefinition of 'char c[30]'
#firmware
#radiuno
Hello, I am attempting to compile the KD8CEC firmware for my stock uBITX with stock display, following the excellent instructions by Mike VK2DJP. But I get this error message : redefinition of 'char c
Hello, I am attempting to compile the KD8CEC firmware for my stock uBITX with stock display, following the excellent instructions by Mike VK2DJP. But I get this error message : redefinition of 'char c
|
By
...
·
|
|
Bitx 40 - My Raduino doesn't look like the others 6 messages
#bitx40
#radiuno
#bitx40help
Hi, I have the same board. Is the connection correct? The yellow wire would not connect. I believe. Thanks!, LU1DLA Alejandro
Hi, I have the same board. Is the connection correct? The yellow wire would not connect. I believe. Thanks!, LU1DLA Alejandro
|
By
lu1dla@...
·
|
|
DDS-VFO reconstructed 6 messages
#arduino
#bitx40help
#radiuno
#firmware
I attach a video of my creation and photos of the main components used
I attach a video of my creation and photos of the main components used
|
By
SaMa photo SaMa photo
·
|
|
3rd Party Raduino Board 2 messages
#radiuno
I have purchased several from them, and they are an improvement over the stock Raduino. You will not be disappointed. The boards they sell for the jacks are very nice as well. Mike AI4NS
I have purchased several from them, and they are an improvement over the stock Raduino. You will not be disappointed. The boards they sell for the jacks are very nice as well. Mike AI4NS
|
By
...
·
|
|
uBitx VFO VFO frequency deviation 700 Hz at 80 meters; 1400 Hz at 40 meters ... 10 messages
#calibration
#radiuno
#ubitx
The 2nd receiver did the trick. Thanks.
The 2nd receiver did the trick. Thanks.
|
By
John Nieman
·
|
|
si5351 crosstalk 74 messages
#radiuno
This is a fairly old thread but I recently did some testing on my own version Si5351 board with buffer chips on each output, which maybe of interest. I only tested 2 outputs, 0 and 2, for cross-talk a
This is a fairly old thread but I recently did some testing on my own version Si5351 board with buffer chips on each output, which maybe of interest. I only tested 2 outputs, 0 and 2, for cross-talk a
|
By
Glenn
·
|
|
bitx40 displays version, hums, but does not receive 21 messages
#bitx40help
#bitx40
#radiuno
All, Please ignore my previous email. I did not realize it was a Bitx40 rig. I do not have any experience with that board. Next time I should read the header BEFORE I respond. Sorry. Evan AC9TU
All, Please ignore my previous email. I did not realize it was a Bitx40 rig. I do not have any experience with that board. Next time I should read the header BEFORE I respond. Sorry. Evan AC9TU
|
By
Evan Hand
·
|
|
Raduino clicking when microphone is connected or keying CW. 14 messages
#ubitx-help
#radiuno
Also, an update to my initial post, the tone I experienced when keying cw was a result of poor construction practice. I had the resistor connected directly to the tip connection along with the blue wi
Also, an update to my initial post, the tone I experienced when keying cw was a result of poor construction practice. I had the resistor connected directly to the tip connection along with the blue wi
|
By
KN4IYL
·
|
|
uBitx Raduino Firmware Upgrade Using Source Files
#radiuno
Installing any firmware on a Mac is not so complicated. Instead of hex file you can also use source files of the firmware. I have prepared a quick guide how uBITX firmware is uploaded from source file
Installing any firmware on a Mac is not so complicated. Instead of hex file you can also use source files of the firmware. I have prepared a quick guide how uBITX firmware is uploaded from source file
|
By
Snowist
·
|
|
BITX40 problem 5 messages
#radiuno
#parts
#bitx40help
#bitx40
Good morning Farnham I sent you a private message! The text of the email I sent to Hfsignals is this: Good evening This year I bought a BITX40 kit and accidentally burned the board with arduino! 😞 It
Good morning Farnham I sent you a private message! The text of the email I sent to Hfsignals is this: Good evening This year I bought a BITX40 kit and accidentally burned the board with arduino! 😞 It
|
By
SaMa photo SaMa photo
·
|
|
Miswired USB, need help fixing display 14 messages
#ubitx
#radiuno
You blew your arduino. They are cheap and not to bad to replace.
You blew your arduino. They are cheap and not to bad to replace.
|
By
_Dave_ AD0B
·
|
|
9H4N, Paul Gauci
#radiuno
#arduino
#ubitx-help
#ubitx
Open Letter to Paul Gauci, 9H4N. Paul, You have emailed me several times requesting information and pricing on the TSW Raduino Clone. I have replied to every email you sent but you keep requesting inf
Open Letter to Paul Gauci, 9H4N. Paul, You have emailed me several times requesting information and pricing on the TSW Raduino Clone. I have replied to every email you sent but you keep requesting inf
|
By
Jim Sheldon
·
|
|
Raduino fix leads to no receive uBitx 21 messages
#radiuno
#ubitx
notlarc, i forgot to mention that i didnt have any rg8 or rg58 . know what i ran? rg6u. some guys will write pages about how you shouldnt do this or that. use what u have and enjoy. you sound like me
notlarc, i forgot to mention that i didnt have any rg8 or rg58 . know what i ran? rg6u. some guys will write pages about how you shouldnt do this or that. use what u have and enjoy. you sound like me
|
By
david todd
·
|
|
raduino 1.28.1 stuck in fine tuning mode 7 messages
#bitx40help
#firmware
#radiuno
Hi Ed, well it seems you found the problem. If none of the D inputs work then perhaps your Nano is faulty and needs to be replaced. 73 Allard PE1NWL
Hi Ed, well it seems you found the problem. If none of the D inputs work then perhaps your Nano is faulty and needs to be replaced. 73 Allard PE1NWL
|
By
Allard PE1NWL
·
|
|
Raduino "Clone" kit available from TSW
#bitx40
#radiuno
#ubitx
Since several asked if the Raduino "Clone" board kit available through the "Triumvirate Skonk Worx" (www.w0eb.com) would work with the BITX40, I did a little research and the answer is YES it will. If
Since several asked if the Raduino "Clone" board kit available through the "Triumvirate Skonk Worx" (www.w0eb.com) would work with the BITX40, I did a little research and the answer is YES it will. If
|
By
Jim Sheldon
·
|
|
French translations of installation and user instructions for the #radiuno sketch for
#radiuno
#bitx40
Hi, A team of french operators kindly translated the installation and user instructions for the Raduino sketch for BitX40. I've included them in the Raduino repository on Github: https://github.com/am
Hi, A team of french operators kindly translated the installation and user instructions for the Raduino sketch for BitX40. I've included them in the Raduino repository on Github: https://github.com/am
|
By
Allard PE1NWL
·
|