Dear Henk, Mark, Nitin Wiliam, Good Day and Greetings. As guided by you all I downloaded the firmware of N8ME from files section . Subsequently, as suggested by Nitin(#90213) I incorporated the change

#ili9341

On Sun, Aug 29, 2021 at 12:40 AM, Henk wrote: Good Day Muthu, The files are under the files section of the group. https://groups.io/g/BITX20/files/uBITX%206%20N8ME/uBITX_6_N8ME_2.zip I would suggest y

#ili9341

Thanks for the info. Glad you found the issue. Mark

#ili9341

Hello Mark, I made below changes in the file hb_hand_key to reset tx timeout timer when sending CW and it resolved the issue. --------------------------------------------------------------------------

#ili9341

Hello Mark, Thanks for your revert. That takes care of my query. I have arranged the UI Buttons as per my needs by modifying main_button.h and it works well. One area where I need your help is in CW m

#ili9341

Unfortunately, I’ve gotten busy with other projects and haven’t worked on my uBITx sketch in quite some time. The 0 value in the RF button indicates the amount of RF attenuation. With each touch it cy

#ili9341

Hello Joseph, Many thanks for pointing to this Firmware from N8ME. I just downloaded the latest one dated Feb-19, 2021 from the files section First impression is very impressive and I'm exploring it.

#ili9341

Good Day Muthu, The files are under the files section of the group. https://groups.io/g/BITX20/files/uBITX%206%20N8ME/uBITX_6_N8ME_2.zip I would suggest you look at the defines.h file first as this is

#ili9341

Dear Joseph, GREETINGS. KINDLY FURNISH THE DETAILS FROM WHERE AND HOW THE N8M'S FIRMWARE FOR UBITX V6 WITH STOCK SCREEN CAN BE DOWNLOADED. I CAN'T GET IT FROM GITHUB. Expecting your valuable reply and

#ili9341

Check out N8ME's firmware in the file's section. It's EXTREMELY usable with the stock screen. I'm using it very well. Almost bought the Nextion but this works just fine. Cheers ~k8sel I'm hoping to th

#ili9341

Dean: I agree, especially with multiple ways to solve a problem. I tried the Nextion editor years ago and didn't like it, so never tried again. I'm sure it's improved over the years. I also realize th

#ili9341

Jack - Understand about the cost difference but for me it is an easy trade off. One of the things I like about the Nextion is the screen editor and object library. The Nextion IDE is super feature ric

#ili9341

Jack, I think that the biggest allure for people on this listserver is that a lot of the programming has already been done by Dr. Lee (KD8CEC) and others. I did a quick cost comparison, without trying

#ili9341

I really don't understand the allure of the Nextion series of displays. They are 4x as expensive as a non-Nextion display with similar features and they don't require you to store pages in memory/SD c

#ili9341

I had to do something right...... eventually Reg G4NFR

#ili9341

Great information and a clearer understanding of the available paths. Teensy has interested me for some time and will likely go that route. Thanks everyone - I appreciate the help 73 Mark - WB1FCG

#ili9341

Mark, As Jim, W0EB, accurately stated, there is not much room in processing resources with the single, stock Nano. It takes almost ALL of them for either the v6 stock graphic display or the KD8CEC (co

#ili9341

Mark You would have to ask K8CEC about any forks to support different type displays using his code.. There are many different displays available, some inexpensive and some not inexpensive. Occasionall

#ili9341

Yes because you bought a nextion display!

#ili9341

I am using the CEC firmware and Nextion screen and it runs perfectly well. There is no noticeable delay as far as I can see. Reg G4NFR

#ili9341