Thanks Dale, LOL I figured out my fundamental error....I’m hearing and Saying S-meter and thinking SWR meter ( Stockton bridge) oops.

#ubitxv6 #firmware

I use the UBITX V5 for the digital Pactor operating mode. The properties of this mode of operation do not allow a connection to be unwound properly. The processing of the PTT via Arduino is too slow.

#digital #firmware #v5

Here we go again, mr Reed so happy with your software, n the beginning i have and had big problems with my v6. Mic poblems, calibration problems, output promblems etcetc. Now i installed your software

#arduino #nano #firmware #ubitx #ubitxv6

Reed Could you email me at w2ctx@...? rOn

#ubitx #firmware #nano #arduino #v6

Hi Ken, "getTouch" function is in the file touch.h. This is the structure that I have for the TFT_eSPI library: Do you have the ·"extensions" folder? Ramón

#firmware #raduino #ubitxv6 #v6

There is nothing wrong with old just because of age. It's only a number. Tell me about it! And that applies to the old-dog-new-tricks excuse some use for not trying the newer technology (e.g., SMD ver

#firmware #bitx40help

Thanks! Hopefully that process will go smoothly too. Reed

#v6 #firmware

Thanks Shyam...some more changes are in process including the CW shift issue. Hopefully by this weekend, I will be able to upload it.

#bfo #calibration #firmware #ubitxv6

Elecraft has (or used to have) a simple S-meter calibrator that put out a signal that was supposed to be S9 and was pretty inexpensive, if you really need to have accuracy. Then you could check it wit

#calibration #firmware #i2c #smeter #ubitx

Hi, I just received a knockoff programmer and some SMD adaptor boards from eBay. So was able to solder one of my 24 cent processor chips to a 25 cent adaptor board and program it to run a blink test.

#firmware #i2c

Hi, Using Micro sd card can not plug in the Card with the adapter (scan disk adapter) for micro sd card. Can not plug in the adapter when the adapter is used with display plugged in (No room) to ubitx

#firmware

I recently bought a v5 un-assembled. After a few days of assembly I immediately updated the firmware to CEC 1.2. Now when I power the radio is quickly displays what seems to be 2 software versions lik

#v5 #firmware

Hello, I am attempting to compile the KD8CEC firmware for my stock uBITX with stock display, following the excellent instructions by Mike VK2DJP. But I get this error message : redefinition of 'char c

#firmware #radiuno

Mark, Is your softWare written for the 5”Nextion Enhanced version…? i HOPE SO. Herman PA0BAB Van: BITX20@groups.io <BITX20@groups.io> Namens Herman Scheper Verzonden: maandag 23 september 2019 19:01 A

#firmware

Here is the CEC 2.8 flipped upside down. I'm not sure if the provided 2.8" fills the screen or has to be adjusted. Let me know...

#firmware #nextion #ubitx

My comment on the 5” should have been a 2.8 *without any scaling* mark

#firmware

I attach a video of my creation and photos of the main components used

#arduino #bitx40help #radiuno #firmware

Bill, I've finally had a chance to get on my laptop. For the 20x4 display, these are the relevant files from the CEC v1.2 binaries. UBITXV5_CEC_Vxxxxx_20P.hex : 20x04 Parallel LCD UBITXV5_CEC_Vxxxxx_2

#ubitx-help #firmware

I have a V4 and a V5 for sale. Both have the JackAl board. I also have 5” and 7” displays and the protection boards coming. One JackAl is assembled and the other has all the parts The V4 board has the

#firmware #ubitx

Thanks -- my goal with the uBITX was multiband ops with mini-effort and max coverage -- simplicity. I wasn't smart enough to know what this means is you lose low SWR numbers. But then I wasn't smart e

#calibration #firmware