|
Low audio v6 candidate solution 9 messages
#bitx20
Hi Kelly Glad you got working to your satisfaction. A 386 might only put out a half of a watt. I have the bfo set for the sound that I hear the best. It isn't the most even type of sound level but it
Hi Kelly Glad you got working to your satisfaction. A 386 might only put out a half of a watt. I have the bfo set for the sound that I hear the best. It isn't the most even type of sound level but it
|
By
_Dave_ AD0B
·
|
|
New ubitx v6 on the way/construction 10 messages
#bitx20
Kelly, Yeah, you are right about a powered speaker as I have found that the stock volume is a bit lacking and if turned all the way up starts either clipping or distorting. 73, Justin KI5GKD
Kelly, Yeah, you are right about a powered speaker as I have found that the stock volume is a bit lacking and if turned all the way up starts either clipping or distorting. 73, Justin KI5GKD
|
By
Justin Bowser - KI5GKD
·
|
|
New ubitx v6 on the way 15 messages
#bitx20
Evan, thanks again!! I appreciate the help! Kelly KD5AJ
Evan, thanks again!! I appreciate the help! Kelly KD5AJ
|
By
Kelly Mabry
·
|
|
carrier on ssb 5 messages
#bitx20
Yes i understand the settings saved pertain only to that board. I will get back with my results later today. i will save a screen shot on the 7300 or my other sdr's. Will let you know Very appreciativ
Yes i understand the settings saved pertain only to that board. I will get back with my results later today. i will save a screen shot on the 7300 or my other sdr's. Will let you know Very appreciativ
|
By
andy@...
·
|
|
EasyBitx 20. Delay in Power Output 4 messages
#bitx20
Hmm, Sounds like something was wrong with the board's original mic amp circuit. I can't imagine they are all like that. Good you got it fixed, but it would be interesting to know what the original pro
Hmm, Sounds like something was wrong with the board's original mic amp circuit. I can't imagine they are all like that. Good you got it fixed, but it would be interesting to know what the original pro
|
By
Mark - N7EKU
·
|
|
bitx-ver-3c LCD PIC processor code 3 messages
#bitx20
#bitx20help
I think you missed what the man is saying. He's working with the original bitx20 kit that was around before the Raduino and uses an FLL board with a PIC and LCD display. The FLL also supplies stabiliz
I think you missed what the man is saying. He's working with the original bitx20 kit that was around before the Raduino and uses an FLL board with a PIC and LCD display. The FLL also supplies stabiliz
|
By
Jason Pirok
·
|
|
PTT with digital modes 9 messages
#bitx20
#cat
#digital
That did the trick! Just made my first contact on FT8 with the uBITX! Thank you.
That did the trick! Just made my first contact on FT8 with the uBITX! Thank you.
|
By
W6LKB
·
|
|
Half-assembled bitx40 and smoked ubitx V3 5 messages
#bitx20
#v3
Hi Ben, If the bitx 40 is still available and you're willing to post to the uk i will reimburse you for any costs.regards Dsve.,
Hi Ben, If the bitx 40 is still available and you're willing to post to the uk i will reimburse you for any costs.regards Dsve.,
|
By
Dave Dixon
·
|
|
#bitx20 2 messages
#bitx20
Hello Andrew, The output of AmateurRadioKit AGC is a current out for the analog meter, my be the better way is to put a resistor in parallel to +/- terminals, equivalent at the maximum deviation of th
Hello Andrew, The output of AmateurRadioKit AGC is a current out for the analog meter, my be the better way is to put a resistor in parallel to +/- terminals, equivalent at the maximum deviation of th
|
By
...
·
|
|
Easy Bitx Kit 4 messages
#bitx20
#bitx40
Thanks much, Loris, for the feedback. Bob — KK5R
Thanks much, Loris, for the feedback. Bob — KK5R
|
By
Bob Lunsford
·
|
|
New nano board displays only "ubitx v4.3" 8 messages
#arduino
#bitx20
#bitx20help
#antennas
#audiocircuit
Gary, Is it possible to remove the Raduino and display from the case and connect to the USB port on your computer without the mainboard? The Raduino should powerup and the display should show the norm
Gary, Is it possible to remove the Raduino and display from the case and connect to the USB port on your computer without the mainboard? The Raduino should powerup and the display should show the norm
|
By
Evan Hand
·
|
|
Need new v4 raduino to work with green display 15 messages
#ft8
#arduino
#bitx20
#bitx20help
#digital
I've RFed an Arduino Uno in the past and scrambled it. Had to reprogram it and it was fine afterward. Give it a try rewriting it. When I RFed the Uno some of the functions were still working, just not
I've RFed an Arduino Uno in the past and scrambled it. Had to reprogram it and it was fine afterward. Give it a try rewriting it. When I RFed the Uno some of the functions were still working, just not
|
By
Vince Vielhaber
·
|
|
7805 Regulator on the RADUINO and M5141 Regulator on the nano arduino. 3 messages
#bitx20
#du9gt
Ah yes, the 78xx series of linear voltage regulators. If you consider the input/output voltage differential, there's quite a bit of power to sink (heat). Some have "staged" with additional voltage reg
Ah yes, the 78xx series of linear voltage regulators. If you consider the input/output voltage differential, there's quite a bit of power to sink (heat). Some have "staged" with additional voltage reg
|
By
VE3MIC
·
|
|
µBITX ... AGC or AVC? an interesting article by Curt WB8YYY ... maAgain,e that's the solution to my troubles ! 8 messages
#ubitx
#bitx40
#bitx20
#ubitxv6
#v6
Loris You are correct in these statements, that signal strength must be measured independent of the volume control, meaning we cannot sample it after the volume control setting. Second that rendering
Loris You are correct in these statements, that signal strength must be measured independent of the volume control, meaning we cannot sample it after the volume control setting. Second that rendering
|
By
Curt
·
|
|
µBITX ... AGC or AVC? an interesting article by Curt WB8YYY ... maybe that's the solution to my troubles ! 39 messages
#ubitx
#bitx40
#bitx20
#ubitxv6
#v6
no cultural difference, it is extremely difficult to translate Italian sarcasm into English, just to clarify English is certainly not the master of culture ... don't you think? ... try reading Dante i
no cultural difference, it is extremely difficult to translate Italian sarcasm into English, just to clarify English is certainly not the master of culture ... don't you think? ... try reading Dante i
|
By
...
·
|
|
FLL Freq display and VFO 3 messages
#bitx20
G0NMY, Did this help? 73. Mark
G0NMY, Did this help? 73. Mark
|
By
Mark - N7EKU
·
|
|
uBitx v6 BFO Fabrication Setting 3 messages
#bitx20
#ubitxv6
#v6
Hi Evan, Thanks for your help. It's okay. 73 Bora
Hi Evan, Thanks for your help. It's okay. 73 Bora
|
By
Bora Gürbüz
·
|
|
I have a problem with the original bitx20 version 5 messages
#bitx20help
#bitx20
there are some creaky bones like us who are stull puffing the ol bitx20. this way before this city came up here. we'd hunt 'em nylon tap washers and cook 20 meters on nights of 2009 cycle. - f
there are some creaky bones like us who are stull puffing the ol bitx20. this way before this city came up here. we'd hunt 'em nylon tap washers and cook 20 meters on nights of 2009 cycle. - f
|
By
Ashhar Farhan
·
|
|
BitX 20 Build: Nylon washer or toroid 26 messages
#bitx20
I just recently ordered some toroids, they were reasonably priced and International delivery was “quick” took about 7 days to get to Sarnia Canada. Under normal conditions this is good delivery time f
I just recently ordered some toroids, they were reasonably priced and International delivery was “quick” took about 7 days to get to Sarnia Canada. Under normal conditions this is good delivery time f
|
By
Mick
·
|
|
How install Sotabeams Variable Bandwidth Filter inside uBITX V. 5 11 messages
#filters
#v5
#bitx20
Hi, Having seen your later message I now see you have the variable bandwidth filter. That should be very good, my filter is the one with 2 filters for CW - a less complicated filter. Judging by the pe
Hi, Having seen your later message I now see you have the variable bandwidth filter. That should be very good, my filter is the one with 2 filters for CW - a less complicated filter. Judging by the pe
|
By
R. Tyson
·
|