I received my Ubix V6 yesterday and had it up and running a few hours ago. I believe it's just their Website hasn't been updated. I received an Email from the Shipping Agent.

Hi. My Ubix V6 that arrived yesterday is running V 6.1 or at least that is what the color touch screen displays. I am assuming that is the version number. Best of luck Regards Owen Vk5fkov Sent from m

Hi Arv Evans, I'm a complete newbie to Amateur Radio but not electronics Arduino's etc. I have used the same ? level converters in an Usb Rs232 5 volt logic to 3.3 ? logic conversion when uploading co

#i2c

I'm using an old Atx Ps 12 volts. Just a suggestion Don't know how noisy it is electrically. Regards Owen Vk5fkol Sent from my SAMSUNG Galaxy S7 on the Telstra Mobile Network

Excellent Ramon, Please keep posting your progress. I have been playing with it's smaller brother Esp8266 and Arduino's for quite a while. Esp's open up quite a few possibilities. Will interference be

#firmware #raduino #ubitxv6 #v6

I'm using a dummy load on my Ubitx V6.1 and an Sdr as a test. The mike socket seems to be a bit sensitive to mike cable movement when I key and move the mike. I also seem to be getting very low output

Thanks Evan, I have followed that procedure and I believe it was successful. But maybe I will do it again. I tested using Morse as well so a mike issue did not confuse the testing. Thanks for the prom

I recently followed Ashhar's excellent Video on tuning the V6. I have completed this twice. My issue is when I transmit voice on 3.5, 7, 21 or 28 Meg's into a dummy load I can receive my transmitted v

Thanks Ulrich for the quick reply. I hope I have your name right. That's great news for me. I did move the receiver to a location appropriately 15 ~ metres away and had the same issue. But hopefully i

Hi I'm troubleshooting what I'm assuming is low modulation when transmitting Ssb. Also I get no responses from local Amateurs when requesting a verification of my signal. My Swr meter indicates low mo

Evan, Thanks for the rapid reply. No wonder I couldn't locate it. I have already built a 1 transistor microphone amp just didn't want to start making changes on a new radio unless I had to that will c

Thanks Gerard, I will try that once I get my current modulation / mike issue sorted. Evan, Can you give me the details of the Power mike you used. 73's Owen

Hi Dave, I grabbed a quick photo of my Ubitx v6.2. Hopefully you can work out the wiring from it if not let me know. Rather late at night here. A storm is just building up. 73 Owen

Hi Christopher, Re Serial cable length. Typical I. T. Answer I'm afraid. Given decent cable terminated correctly and decent Line driver chips 100's of metres but the higher the baud rate or speed the

This info is just in time for my own attempts at working on Smd's. Some great tips thanks for all of them. I am thinking of making some Smd bits for my rather old Weller iron using some modified coppe

Just some very simple tests that others have previously been posted. They worked for me. With your meter connected blow fairly hard into your microphone. Another test is to enable morse code and using

#ubitxv6 #ubitx-help #tx

Thanks Evan, I will keep watching as I'm also interested in that. Regards Owen

#ubitxv6 #ubitx-help #tx

Just a hint re the Raduino. When I tried to flash mine I kept getting 500 Sync errors. Tried other Arduino boards and MOST gave the same error message. Same when using other cables and another Compute

#ft8 #arduino #bitx20 #bitx20help #digital

Hi Gary, I flashed a spare Nano or tried to using the IDE Software with verbose ticked for the Upload option. It kept failing with a can't sync 500 error. I found I had to select the OLD BOOTLOADER op

#arduino #bitx20 #bitx20help #antennas #audiocircuit

Sorry Gary. I misread your email. Ignore my comments.

#arduino #bitx20 #bitx20help #antennas #audiocircuit