Are there any special considerations for implementing KD8CEC's simple LM358 based "simple S-meter sensor" on a V6?

Update: I've been able to SSH to my Pi 0 on both Linux and Mac, but still no luck with Windows 10. 73, Mark, N8ME

Thanks for that! Figures -- my component money went to a new uBitX v6 a few days ago. :-) I'll be joining the ranks pretty soon! Will B AF7EC

That may work, but I would prefer to not have to add additional hardware. 73, Mark, N8ME

Bonjour is installed and working. All the online info I've found online indicates that the Pi Zero should create a RNDIS USB / Ethernet gadget, but it looks like Windows has removed the drivers. Some

I think for windows to see the Pi over USB you need to install Apple bonjour.

You can attach a enc28j60 and enable true ethernet port on raspberry pi zero https://www.raspberrypi-spy.co.uk/2020/05/adding-ethernet-to-a-pi-zero/ Rick LU9DA

Thanks for your fork, I think I'll re-base my fork on top of yours. The interface is sooo smooth. I'll test everything again with your fork. ; ) Rafael

https://mpja.us9.list-manage.com/track/click?u=2b09559a01d02ecc913387081&id=a90a5183ad&e=42ba0e8752

Yep, that's it. If you find issues with CAT stuff on it, definitely send a PR my way! Reed

I spent the day trying to access my Raspberry Pi Zero via SSH over USB with no luck. It seems Windows 10 doesn't like RNDIS / Ethernet Gadget. FWIW, the $5 Pi Zero doesn't have wireless, you need to s

Reed, this is your fork, right? https://github.com/reedbn/ubitxv6/ Rafael

Here's a Pi-Zero for $5: https://www.adafruit.com/product/2885 Looks ideal. As demonstrated by the recent thread here about the Nano Every: https://groups.io/g/BITX20/message/85303 there is some work

Definitely. I don't know how you'd get one for $5, but it would make a very extensible controller. You could have wireless CAT controls, probably run a better display, and do some digital signal proce

Yup, as stated in post 85296: ########## The above is not always true. It could well be that a competitor pops up in the next few months that has a better product. ########## However, I have yet to he

Loris, Should be fine to just substitute an ADE-1 or SBL-1 on any *bitx* design. Diode ring mixers present an impedance at the input roughly equal to what is found at the output port, since when two o

Hmmm...some clones are because the original was faulty and the clone manufacturer has fixed the problem. 8-) _._

Hello, Like I said I did a "hobrew ubitx" from A to Z It works very well and I only do reception. I did the toroids myself. I don’t see any particular problem with the realization. In general, there a

Ok Jerry What bothers me a little is that it is 79 € or 96$ at passion radio official distributor of Tinysa Double the price in the US ($49) I inquired, if purchase in the US, 30€ of shipping , so it

Thanks Jerry I think I'll try (on the EASY BITX) with a Minicircuits mixer, instead of the two toroids and the diodes ring. A Question if you want to answer me: Do you think that in the EASY BITX the