Date   
New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: ubitx_35E6.HMI

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/ubitx_35E6.HMI

Cheers,
The Groups.io Team

New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: ubitx_35E6.tft

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/ubitx_35E6.tft

Cheers,
The Groups.io Team

New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: unitx_32B_1c8.HMI

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/unitx_32B_1c8.HMI

Cheers,
The Groups.io Team

New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: unitx_32B_1c8.tft

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/unitx_32B_1c8.tft

Cheers,
The Groups.io Team

New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: unitx_32E_1c8.HMI

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/unitx_32E_1c8.HMI

Cheers,
The Groups.io Team

New file uploaded to BITX20@groups.io

BITX20@groups.io Notification <BITX20+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the BITX20@groups.io group.

File: unitx_32E_1c8.tft

Uploaded By: Allen Merrell

Description:
The E's are enhanced and the B's are basic. They are still a work in progress so let me know what your opinion is.

You can access this file at the URL:
https://groups.io/g/BITX20/files/3.2%20&%203.5%20for%20Nextion%20and%20CEC%201.095/unitx_32E_1c8.tft

Cheers,
The Groups.io Team

Re: ND6T AGC and Click kit wiring notes

Stephanus K6NG
 

Quick questions... to add rf gain I just wire the VR to the AGC board? And how do I wire an AGC fast and slow switch?
Thanks,
  Stephanus 

Re: Question about Nextion display and firmware

f1apy - Jacques
 

Hello Bo,

Many thanks for your responds, and yes, the proc is 2560, I will be very happy

if you send me Hex file, I have just some questions about input/output pins

for identify differents functions.

vY’s 73s de Jacques – F1APY

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Bo Barry
Sent: Sunday, July 15, 2018 4:24 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Question about Nextion display and firmware

 

I don't think the source files for the latest CEC firmware have been released yet. I may still have an earlier version.
I think the chip you mentioned is a mega2560. If so I could send a hex file of the previous version compiled for the 2560.
If your English is bad, you should see my French . 😂 Buenos Dias. Bo W4GHV since '54

receive works great, but no trans power, #ubitx-help

Don - KM4UDX
 

My beloved and long suffering (like my wife) uBitx has no output power in transmit. 
When I key down the display changes from "USB A:" to "CW"
When I PPT it changes from "USB A:" to "TX".

So all that looks good. But. Neither produces a output at the antenna.

What should I check...fix...validate...replace..?

Background...receive works great!!!!!
CEC 1.9x
no mods beyond the firmware update, which seemed to work fine.
And I got no transmit power on the original firmware anyway. 

Thank you for any help!!!!

Don
km4udx

CQ BitX de K4FTP

 

Calling CQ now on 7.277.

73,
K4FTP

Re: Windows Serial Port Problem

Jon Titus, KZ1G <tituskz1g@...>
 

Windows 10 might have some driver problems, but the best bet is to buy genuine Arduino products.  People have reported many problems with knock-off "Arduino" boards.  I use genuine Arduino boards with Win 10 without difficulty.  This link at Arduino shows the differences between genuine products and counterfeits.  Yes, you'll pay a bit more, but you won't hassle with problem boards or drivers.

https://www.arduino.cc/en/Products/Counterfeit

I have no commercial connection with Arduino or any other company.
--
Jon Titus, KZ1G
Herriman, UT USA

Re: Windows Serial Port Problem

Jack Purdum
 

I have probably purchased a 100 clones over the years and, yes, I did have some troubles initially with a few of them, but these were fixed by installing the CH340 drivers in almost every case. Also, it's a bit of a quibble, but non-Arduino boards are not counterfeits, they are second-sourced boards. Counterfeit implies something that is sold illegally as genuine when it is not. As far as I know, the entire Arduino family of boards are Open Source, which means anyone can produce them legally. What would be wrong is to put the Arduino logo on the board, as I believe that is under copyright. eBay has a Nano for sale for $24, and AliExpress has 10 of them for $25. For the difference, I'm willing to (rarely) install the drivers to make them work. I do have my Nano clones working under Win 10, so I'm not sure buying a "genuine" Nano is going to fix the poster's problem.

Jack, W8TEE

On Sunday, July 15, 2018, 3:19:48 PM EDT, Jon Titus, KZ1G <tituskz1g@...> wrote:


Windows 10 might have some driver problems, but the best bet is to buy genuine Arduino products.  People have reported many problems with knock-off "Arduino" boards.  I use genuine Arduino boards with Win 10 without difficulty.  This link at Arduino shows the differences between genuine products and counterfeits.  Yes, you'll pay a bit more, but you won't hassle with problem boards or drivers.

https://www.arduino.cc/en/Products/Counterfeit

I have no commercial connection with Arduino or any other company.
--
Jon Titus, KZ1G
Herriman, UT USA

Re: Windows Serial Port Problem

Allen Merrell
 

I agree with Jack, I have some Arduino's and clones,  the main difference I have seen was price. I have windows 10 now and loaded the CH340 driver and it all works just fine. 
kn4ud
--
Allen  Merrell

Re: Windows Serial Port Problem

Dexter N Muir
 

Yep, old joke always pertinent: "Windows has detected that the mouse has moved. Please reboot to verify new position."

Re: receive works great, but no trans power, #ubitx-help

Lowell Haney NE4EB
 

Have you checked the finals for 12 VDC on the tabs?

Re: ND6T AGC and Click kit wiring notes

Don, ND6T
 

A quick answer: The AGC board is fed by a potentiometer (placed across the receive RF input). The release time may be set by a Variable Resistor placed from J1 to the ground return. Details may be obtained by visiting nd6t.com . Have fun! 73, Don

Re: Question about Nextion display and firmware

Mike Woods
 

I suggest writing to Ian KD8CEC.  He will proved the source code for beta releases on request.

M

On Mon, 16 Jul 2018 at 6:16 AM, f1apy - Jacques <f1apy@...> wrote:

Hello Bo,

Many thanks for your responds, and yes, the proc is 2560, I will be very happy

if you send me Hex file, I have just some questions about input/output pins

for identify differents functions.

vY’s 73s de Jacques – F1APY

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Bo Barry
Sent: Sunday, July 15, 2018 4:24 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Question about Nextion display and firmware

 

I don't think the source files for the latest CEC firmware have been released yet. I may still have an earlier version.
I think the chip you mentioned is a mega2560. If so I could send a hex file of the previous version compiled for the 2560.
If your English is bad, you should see my French . 😂 Buenos Dias. Bo W4GHV since '54

Re: receive works great, but no trans power, #ubitx-help

Don - KM4UDX
 

Yes. 12.45, same as power source. Also, when i hit the PTT w/o audio, both finals have 3.8v/12.45/0 for g/d/s.  The gate goes from 0 to 3.8 when I hit the PPT.

Re: Raduino fix leads to no receive uBitx #radiuno #ubitx

ludwig_t@...
 

Hello,

so does nobody have an idea, what might be wrong with my raduino? Which output levels should be generated by the SI5351 chip? The datasheet tells me, the output levels at the clock pins should be near 3.3V but mine aren't. So I wonder, which signals should be generated by a healthy raduino?

73,
Ludwig, DM2LCT

Re: Enclosure #parts

Bill Watkins
 

Dreams coming to reality. Now a hinge system?