Date   
Re: Low mic gain, was, show your mic

MVS Sarma
 

sorry to have bothered you, Max

Regards
MVS Sarma
 

On Mon, Apr 23, 2018 at 8:27 AM, MAX <max@...> wrote:

Interesting.  That picture has no indication as to which is positive and which is negative.  If I didn’t already know that the upper right connection was ground the picture would be useless.  I am probably offending some people but I’m about fed up.  All of the correct information needs to be gathered in one place.  Call it a manual or whatever you want but  someone who knows needs to take the time and put forth the effort to put it together.  And then all the incorrect information needs to be removed from the web. 

 

Not a happy camper.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 1:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic

 

if i recollect , a reverse polarity was also responding for voice but verey very lowand distorted.


Regards
MVS Sarma
 

 

On Sun, Apr 22, 2018 at 10:15 PM, MAX <max@...> wrote:

Hi sarma.

 

I’m sure I have the polarity correct.  Someone on this list posted a drawing showing how to identify the negative terminal and I wired according to it.  I think the electret mic wouldn’t work at all if polarity were reversed.  What is being powered is an  F E T source follower.   I think I shouldn’t have to raise my voice to get 5 watts output on 40 meters.

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 3:44 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

Max,

 please check whether the mic body is connected to chasis ground.

i mean the positive bias voltage for mic should come on independent pin and NOT to the body pin of the eletret element.

In case you are using a dynamic mic, perhaps we need more gain and your need to shout appers logical.

regards

sarma

vu3zmv


Regards
MVS Sarma
 

 

On Sat, Apr 21, 2018 at 11:27 PM, MAX <max@...> wrote:

Speaking of mics, I have to raise my voice almost to the level of shouting to get 5 watts out on 40 meters.  Is this normal or should I look for a problem?

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Saturday, April 21, 2018 7:17 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

I had grabed a taperecorder mic with 3.5mm mono pin.
 replaced the cable with 2+shield.had a small pushed switchmounted and wired.
 repalced the 3.5mm momo pin to stereo pin. Here is a image of my mic.The pp9 battery helps to imagine the mic size.
regards
 sarma
 vu3zmv

 

 


Re: Low mic gain, was, show your mic

Gordon Gibby
 

Whenever you wish to FUND that effort, you'll easily find people who will be willing to get on your payroll!!


If you look at that photo, there's a "clue" in that one terminal connects to the CASE.    And the legend that I always saw on the similar photo here:   http://www.hfsignals.com/index.php/2017/11/23/wiring-up-the-bitx40/   is also a good giveaway.


This tutorial is another explanatory bit of information (about the first one that popped up in a google search for electret mic pinout)   https://components101.com/electret-condenser-microphone


That's ham radio!


gordon




From: BITX20@groups.io <BITX20@groups.io> on behalf of MAX <max@...>
Sent: Sunday, April 22, 2018 10:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic
 

Interesting.  That picture has no indication as to which is positive and which is negative.  If I didn’t already know that the upper right connection was ground the picture would be useless.  I am probably offending some people but I’m about fed up.  All of the correct information needs to be gathered in one place.  Call it a manual or whatever you want but  someone who knows needs to take the time and put forth the effort to put it together.  And then all the incorrect information needs to be removed from the web. 

 

Not a happy camper.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 1:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic

 

if i recollect , a reverse polarity was also responding for voice but verey very lowand distorted.


Regards
MVS Sarma
 

 

On Sun, Apr 22, 2018 at 10:15 PM, MAX <max@...> wrote:

Hi sarma.

 

I’m sure I have the polarity correct.  Someone on this list posted a drawing showing how to identify the negative terminal and I wired according to it.  I think the electret mic wouldn’t work at all if polarity were reversed.  What is being powered is an  F E T source follower.   I think I shouldn’t have to raise my voice to get 5 watts output on 40 meters.

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 3:44 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

Max,

 please check whether the mic body is connected to chasis ground.

i mean the positive bias voltage for mic should come on independent pin and NOT to the body pin of the eletret element.

In case you are using a dynamic mic, perhaps we need more gain and your need to shout appers logical.

regards

sarma

vu3zmv


Regards
MVS Sarma
 

 

On Sat, Apr 21, 2018 at 11:27 PM, MAX <max@...> wrote:

Speaking of mics, I have to raise my voice almost to the level of shouting to get 5 watts out on 40 meters.  Is this normal or should I look for a problem?

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Saturday, April 21, 2018 7:17 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

I had grabed a taperecorder mic with 3.5mm mono pin.
 replaced the cable with 2+shield.had a small pushed switchmounted and wired.
 repalced the 3.5mm momo pin to stereo pin. Here is a image of my mic.The pp9 battery helps to imagine the mic size.
regards
 sarma
 vu3zmv

 

 

Re: Low mic gain, was, show your mic

Gordon Gibby
 

Multiple people have explained how to decrease the emitter resistor in the mic amplifier stage to incrase the gain.   I didn't think of that, so just built a 1-transistor preamp for it and was quite happy.    Also had to do that for another transceiver I owned 30+ years ago.   Simple enough to do.    


Also be careful, the average power output measured by an analog scale is far far less than the peak if if you push the apparent average way up there....all you'll be doing is pushing the peaks into non-linear splattering.   


the older hams used to use oscilloscopes on their outputs so they could actually SEE when they were overmodulating.   Impressive amount of concern, I would say!    But I did get two of those type scopes for relatively cheap on ebay....use them to show people what signals look like in license classes occasionally.


that's ham radio!

​it isn't meant to be easy



gordon




From: BITX20@groups.io <BITX20@groups.io> on behalf of Gordon Gibby <ggibby@...>
Sent: Sunday, April 22, 2018 11:04 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic
 

Whenever you wish to FUND that effort, you'll easily find people who will be willing to get on your payroll!!


If you look at that photo, there's a "clue" in that one terminal connects to the CASE.    And the legend that I always saw on the similar photo here:   http://www.hfsignals.com/index.php/2017/11/23/wiring-up-the-bitx40/   is also a good giveaway.


This tutorial is another explanatory bit of information (about the first one that popped up in a google search for electret mic pinout)   https://components101.com/electret-condenser-microphone


That's ham radio!


gordon




From: BITX20@groups.io <BITX20@groups.io> on behalf of MAX <max@...>
Sent: Sunday, April 22, 2018 10:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic
 

Interesting.  That picture has no indication as to which is positive and which is negative.  If I didn’t already know that the upper right connection was ground the picture would be useless.  I am probably offending some people but I’m about fed up.  All of the correct information needs to be gathered in one place.  Call it a manual or whatever you want but  someone who knows needs to take the time and put forth the effort to put it together.  And then all the incorrect information needs to be removed from the web. 

 

Not a happy camper.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 1:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic

 

if i recollect , a reverse polarity was also responding for voice but verey very lowand distorted.


Regards
MVS Sarma
 

 

On Sun, Apr 22, 2018 at 10:15 PM, MAX <max@...> wrote:

Hi sarma.

 

I’m sure I have the polarity correct.  Someone on this list posted a drawing showing how to identify the negative terminal and I wired according to it.  I think the electret mic wouldn’t work at all if polarity were reversed.  What is being powered is an  F E T source follower.   I think I shouldn’t have to raise my voice to get 5 watts output on 40 meters.

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 3:44 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

Max,

 please check whether the mic body is connected to chasis ground.

i mean the positive bias voltage for mic should come on independent pin and NOT to the body pin of the eletret element.

In case you are using a dynamic mic, perhaps we need more gain and your need to shout appers logical.

regards

sarma

vu3zmv


Regards
MVS Sarma
 

 

On Sat, Apr 21, 2018 at 11:27 PM, MAX <max@...> wrote:

Speaking of mics, I have to raise my voice almost to the level of shouting to get 5 watts out on 40 meters.  Is this normal or should I look for a problem?

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Saturday, April 21, 2018 7:17 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

I had grabed a taperecorder mic with 3.5mm mono pin.
 replaced the cable with 2+shield.had a small pushed switchmounted and wired.
 repalced the 3.5mm momo pin to stereo pin. Here is a image of my mic.The pp9 battery helps to imagine the mic size.
regards
 sarma
 vu3zmv

 

 

Re: Low mic gain, was, show your mic

Gordon Gibby
 

Max, your web site is very impressive!   great work!!  


On Apr 22, 2018, at 23:12, Gordon Gibby <ggibby@...> wrote:

Multiple people have explained how to decrease the emitter resistor in the mic amplifier stage to incrase the gain.   I didn't think of that, so just built a 1-transistor preamp for it and was quite happy.    Also had to do that for another transceiver I owned 30+ years ago.   Simple enough to do.    


Also be careful, the average power output measured by an analog scale is far far less than the peak if if you push the apparent average way up there....all you'll be doing is pushing the peaks into non-linear splattering.   


the older hams used to use oscilloscopes on their outputs so they could actually SEE when they were overmodulating.   Impressive amount of concern, I would say!    But I did get two of those type scopes for relatively cheap on ebay....use them to show people what signals look like in license classes occasionally.


that's ham radio!

​it isn't meant to be easy



gordon




From: BITX20@groups.io <BITX20@groups.io> on behalf of Gordon Gibby <ggibby@...>
Sent: Sunday, April 22, 2018 11:04 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic
 

Whenever you wish to FUND that effort, you'll easily find people who will be willing to get on your payroll!!


If you look at that photo, there's a "clue" in that one terminal connects to the CASE.    And the legend that I always saw on the similar photo here:   http://www.hfsignals.com/index.php/2017/11/23/wiring-up-the-bitx40/   is also a good giveaway.


This tutorial is another explanatory bit of information (about the first one that popped up in a google search for electret mic pinout)   https://components101.com/electret-condenser-microphone


That's ham radio!


gordon




From: BITX20@groups.io <BITX20@groups.io> on behalf of MAX <max@...>
Sent: Sunday, April 22, 2018 10:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic
 

Interesting.  That picture has no indication as to which is positive and which is negative.  If I didn’t already know that the upper right connection was ground the picture would be useless.  I am probably offending some people but I’m about fed up.  All of the correct information needs to be gathered in one place.  Call it a manual or whatever you want but  someone who knows needs to take the time and put forth the effort to put it together.  And then all the incorrect information needs to be removed from the web. 

 

Not a happy camper.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 1:57 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Low mic gain, was, show your mic

 

if i recollect , a reverse polarity was also responding for voice but verey very lowand distorted.


Regards
MVS Sarma
 

 

On Sun, Apr 22, 2018 at 10:15 PM, MAX <max@...> wrote:

Hi sarma.

 

I’m sure I have the polarity correct.  Someone on this list posted a drawing showing how to identify the negative terminal and I wired according to it.  I think the electret mic wouldn’t work at all if polarity were reversed.  What is being powered is an  F E T source follower.   I think I shouldn’t have to raise my voice to get 5 watts output on 40 meters.

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Sunday, April 22, 2018 3:44 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

Max,

 please check whether the mic body is connected to chasis ground.

i mean the positive bias voltage for mic should come on independent pin and NOT to the body pin of the eletret element.

In case you are using a dynamic mic, perhaps we need more gain and your need to shout appers logical.

regards

sarma

vu3zmv


Regards
MVS Sarma
 

 

On Sat, Apr 21, 2018 at 11:27 PM, MAX <max@...> wrote:

Speaking of mics, I have to raise my voice almost to the level of shouting to get 5 watts out on 40 meters.  Is this normal or should I look for a problem?

 

Regards.

 

Max K 4 O D S.

 

I've Never Lost the Wonder.

 

Antique Electronics Site: http://www.angelfire.com/electronic/funwithtubes/

 

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mvs Sarma
Sent: Saturday, April 21, 2018 7:17 AM
To: BITX20@groups.io
Subject: Re: [BITX20] show your mic

 

I had grabed a taperecorder mic with 3.5mm mono pin.
 replaced the cable with 2+shield.had a small pushed switchmounted and wired.
 repalced the 3.5mm momo pin to stereo pin. Here is a image of my mic.The pp9 battery helps to imagine the mic size.
regards
 sarma
 vu3zmv

 

 

Re: BITX QSO Afternoon/Evening, Sunday, April 22, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere.

Skip Davis
 

I heard Tom VE3THR in QSO with Dave K0MBT and followed them up and down in frequency. Tried to call just before they went to 3905MHz but no luck. Oh I did hear you both there but I’m using a 20 meter dipole loaded and I just don’t think it is up to the task on 75 mtrs.

Skip Davis, NC9O 

On Apr 22, 2018, at 21:58, pat griffin <patgriffin@...> wrote:

We were in the middle of thunderstorms, rain and dogs scratching the door.  Undaunted, the bitx40 made it through the static crashes to reach WS4JM a few hundred miles to the North.  It took a few tries to finally get all of the call letters.  Maybe next week the uBitx will be complete-High Power!

73 all

Pat AA4PG



From: BITX20@groups.io <BITX20@groups.io> on behalf of Tom VE3THR <muzzmobility@...>
Sent: Sunday, April 22, 2018 7:33:29 PM
To: BITX20@groups.io
Subject: Re: [BITX20] BITX QSO Afternoon/Evening, Sunday, April 22, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere.
 
Come on guys...my BITX40 is no Maserati but it had an excellent night. 40M peaked about an hour before sunset (my greyline). That random QRM about every 10-15 min might be some kind of radar I'm told. No contests or QRN tonight...S5-S7 noise floor on the big rig. Guess no one is doing laundry tonight in my neighbourhood!
Record number of stations on tonight between 1900 - 2100 HRS Z. Most were well over 5x5 using my 40M dipole @ 30ft. QSO's with N4DR Marc, N6ORS Keith, KN4AIE Rick, WI1B Ken, WA4THR Vic, WA2FZW John, KC1FSZ, AC9RZ Doug and picked a few new ones WA3O Mike, N2HTT Mike, W2NDG, KE0NXP Glenn, AD0RW John and WS4JM Jay.
Mathew S. - get your ticket and join the group. Thanks for the reception reports.
Got my uBITX built and stuffed in a can, finally. Quickly upgraded to KD8CEC's V1.061 firmware. What a huge improvement from the stock version. Still not happy with the calibration settings so work in progress. I suspect the uBITX needs LOT'S OF MIC AUDIO from what I'm hearing up here so keep that mic up close and personal.
Tom VE3THR

Re: uBitx Relay K3 Pins 1 and 5 Location

Dexter N Muir
 

Yes, there is a relationship, but obscure. The data sheets are wrong. Some dummy mirror-imaged them in an attempt to produce a view from below. Theirs is an attempt at IC-numbering, but flipped end-for-end.  The diagram itself is fine if viewed from above, but the IC numbering should be taken with the 'dot' (pin 1) at bottom-right, 'notch' to the right. The extra gaps are the absent pins 7 and 10.
Helpful?
73
Dex, ZL2DEX

Re: Teensy 3.5/3.6 upgrade for uBITX

Jerry Gaffke
 


The ATMega328P on the Nano runs at 16 MHz, has 0.002 MBytes of RAM, is an 8 bit machine.

The RPi Zero runs at a 1000 MHz, has 512 MBytes of RAM, is a full a 32 bit machine,
runs linux if you wish.  Not only will it run the C and C++ code we have on the Arduino
(if you port the Arduino libraries), but it has its own compiler for it.
And a compiler compiler to build the compiler with for that matter (yacc). 

>  I'd consider why the Zero sells for $5.

It sells for $5 because it is of the current decade.
Whereas the ATMega382P is roughly in league with the Z80
I was working with back in the 1970's.
 
That said, the Nano is a fine choice for the basic uBitx.
Not all that much it has to do.

The RPi Nano would be good if you wish to implement standalone SDR, 
with a full waterfall display out to an HDMI monitor.
Or could be used as the Arduino IDE host when programming your Nano.
The top end Rasberry Pi 3 B+ does everything I'd want in a home computer for $35.

Jerry, KE7ER


On Sun, Apr 22, 2018 at 06:17 pm, Jack Purdum wrote:
I'd consider why the Zero sells for $5. I think the biggest issue is that the Pi is a different animal than the Arduino family. First, it does not have a home in the Arduino IDE, where most of the µBITX work is being done. Second, it doesn't have the depth of add-ons that the Arduinos do. Those that do exist seem to be more expensive. Third, most of the work on Pi is either done in scripting languages or Python, neither of which is popular on the Arduino.

If you need more horsepower, consider the Protoneer (eBay 282786290858). It has 256K of flash, 32K of SRAM (HUGE benefit), and is clocked 3x faster than the Nano at a cost of $15. It looks very promising.

Jack, W8TEE
 
 

Re: Upgrade the software to Allard's version #radiuno #bitx40help #nano

SaMa photo SaMa photo
 

As I do I warn you immediately
Sergio

Re: Erratic tuning with my new uBitx

Michael Shreeve
 

Jerry,  he's talking about the typical tuning.  When you turn it quickly its programed to make large jumps.  


On Sun, Feb 25, 2018, 4:50 PM Jerry Gaffke via Groups.Io <jgaffke=yahoo.com@groups.io> wrote:
I had thought the original firmware shipped with the rig was good enough.
Could look for trouble with a DVM or scope on the black and brown wires to the encoder (ENC_A and ENC_B in the wireup diagram),
should see each wire periodically switch between 0 and 5v when slowly turning the knob.
They get pulled high through resistors internal to the Nano, and the encoder sometimes shorts them to ground.


On Sun, Feb 25, 2018 at 04:34 pm, Nik VK4PLN wrote:
Upgrade to the KD8CEC firmware.
https://groups.io/g/BITX20/wiki/uBitx-software

Re: Erratic tuning with my new uBitx

Michael Shreeve
 

And Chris, please take extra care with your XP.  I feel it's an amazing windows system which may disappear.  Back it up big time.  My most recent desktop wouldn't allow me to use a Seagate cloned version.  I couldn't get the drivers to work under xp. 


On Wed, Mar 28, 2018, 4:07 PM Chris Clarke <csclarke@...> wrote:
Many thanks for the info, Ian. Great piece of software, I'm really enjoying starting to get into the Arduino now after wondering about doing so for years, and this really is the perfect project.

Chris G3SQU

Re: show your mic

Praba Karan
 

My ugly mic made from BSNL landline network box


On Wed, Apr 18, 2018, 4:44 AM Doug W <dougwilner@...> wrote:
I am always impressed with the creativity and varieties of solutions this group comes up.  Collectively we range from true artists and craftsmen to hackers, kludgers, and cobblers.  I proudly spend a lot of time at the bottom of that spectrum.  While I am reasonable capable of making things look good with my BITX's I seem to rip things open and apart so often to play with that I am more interested in function than form.  With that in mind I stuck my mic and a junk box push button in a prescription bottle connected to a TRRS cable.  I know several others have posted pictures of their mic set up ranging from pro quality to junk box art. 
LET'S SEE WHAT YOU GOT. (try to keep your image file size as small as possible)

Re: Ubitx.net site correction #ubitx-help #ubitx

W7PEA
 

Actually.. there IS a wiki... right here on this group. Its empty.  :-(

Its also unfortunate that this group is multi-topic. Would anyone else prefer a UBITX only group?

W7PEA, Patrick

Re: show your mic

MVS Sarma
 

P
raba jee, Very nice adoptation of  data splitter supplied by adsl modems . Perhaps even a phone rossette could be used.
 "rossette"




Regards
MVS Sarma
 

On Mon, Apr 23, 2018 at 11:35 AM, Praba Karan <vu3dxr@...> wrote:
My ugly mic made from BSNL landline network box

On Wed, Apr 18, 2018, 4:44 AM Doug W <dougwilner@...> wrote:
I am always impressed with the creativity and varieties of solutions this group comes up.  Collectively we range from true artists and craftsmen to hackers, kludgers, and cobblers.  I proudly spend a lot of time at the bottom of that spectrum.  While I am reasonable capable of making things look good with my BITX's I seem to rip things open and apart so often to play with that I am more interested in function than form.  With that in mind I stuck my mic and a junk box push button in a prescription bottle connected to a TRRS cable.  I know several others have posted pictures of their mic set up ranging from pro quality to junk box art. 
LET'S SEE WHAT YOU GOT. (try to keep your image file size as small as possible)


UBITX Assemly Wiki Page #ubitx

W7PEA
 

I started some rough notes on an assembly page right here on the group we can all update and maintain:
https://groups.io/g/BITX20/wiki/UBITX-Assembly

.. I'll do another round on it (its late) but feel free to make corrections, edits, or suggestions on this thread.

Thanks!
W7PEA - Patrick

Re: Erratic tuning with my new uBitx

Chris Clarke G3SQU
 

Thanks Michael.

Yes, I use Linux for everything I can. I only use XP where there is no convenient alternative and usually pull out the internet dongle! Had Windows 7 for a short while until it screwed up, and at that point I decided to go with Linux (whose main issues are my scanner and my weather station software, but really I need to sort them out. I do use XP for Ian's uBITx Memory Manager for the time being, not having yet had the urge to use WINE ... I guess that's another milestone I need to reach!

Chris

Re: show your mic

David Wilcox
 

WOW!  That is a neat antique.  Might have been a PA or intercom mike back when they used similar ones on a stand for a telephone.  I have seen a lot of old telephones like that with the ear piece hanging off to the side.  When you picked up the ear piece it went to "Central" and the kind lady there connected you to your desired party.  Others had an early dial at the base.  Enjoy a piece of history along with the new.

Dave K8WPE

On Apr 22, 2018, at 10:04 PM, Lee <mr.olson@...> wrote:

I am in the process of re-purposing a very old microphone as you can see in they lower picture, FEB 1944.  A new microphone cable should be here next week.   The carbon element inside was bad so I went for a MAX9812 Microphone on a board for $1.75 on eBay.  This microphone was not from a telephone.  Any guesses?
<Microphone Modded.jpg>

Re: Erratic tuning with my new uBitx

Chris Clarke G3SQU
 

Thanks Nikos.

I am following this up. I have tuned in the Russian 14.996MHz beacon: it peaks through my audio filter at 14.996680 as measured by my ears (ie 80Hz higher than expected).

I have never needed to check the accuracy of my audio filter (specified as 600Hz with 250Hz passband) as with my analogue rig it just works for my ears.  But I think I should do so for use with the uBITx.

73 Chris

Re: Erratic tuning with my new uBitx

Chris Clarke G3SQU
 

Thanks Ian

My external audio filter is a passive LC design by W3NQN that I built as a kit back in the 1990's . No longer available as a kit but it is well described on the web-site (www.w3nqn.com). However it is quite bulky with the AF inductors (and has 3db insertion loss) so possibly not first choice for portable operators! I have just purchased the SOTAbeams 'Laserbeam' digital filter and will be trying that out soon (also incorporates a fixed narrow filter so may have to tweak the uBITx for this as well).

Also following up your other advice, many thanks.

Chris

Re: uBitx Relay K3 Pins 1 and 5 Location

alans77@...
 

Thanks for your helpful replies!
N4AYE

Re: #ubitx SSM2167 mic compressor speaker feedback issue - resolved #ubitx

alans77@...
 

John: Where did you pickup D7 on the Raduino?
73,
Alan N4AYE