Hi Len, From a unusually hot uk. My both my ubitx versions 3 and 4.3 are both in plastic cases and I have not encountered any problems on

Hello everyone I am interested in version 3.5 because I already have the Nextion. Thanks a lot to Allen Merrell and everyone involved, especially Ian Lee. Michel F1GTX

I added the v4 pop-fix to my v3 board by placing components directly onto the v3 board. Start by drilling a small hole (0.7mm in my case) to the right of R70 so as to be able to fix the 2N7000

Forgot to mention, I also swapped out R70 from 100 ohms to 1K. Nigel.

I tried a couple of fans from old PC supplies. They were all very noisy. What I did to solve the problem was to put a resistor (maybe 10 ohms; don't remember and not taking the radio apart) in series

Good stuff. Just put one together myself. A little separate breadboard which I used a small portion so as to have room for another mod or two. Installing the Nextion 3.2 tomorrow. Love the ability to

Hi, I want to expand the amount of digital and analog I/O pins available to add enhancements to my uBITX. To do that I created a Smart LCD Backpack to replace the commonly found ones on the

Ian : Yes I am currently using V1.094 beta with the Nextion 2.8" Display. I will upgrade to V1.095 and try that. Cheers Michael VE3WMB

I am very much looking forward to your blog, Akira-san. Please kindly post the URL here at this BITX20 ML. Many thanks in advance. // hiro, JJ1FXF 2018/07/03 18:07、jj1epe@...のメール:

Tried another uBitxr4 board and had the same problem. I recommend this mod for everyone. Solder the pot and ZERO it and at lowvolume with the band background noise increase the preset and you will

Hi Arv, Thanks for reporting back the results of your experiment. I am thinking that you are going after a 'simple' solution where the fan doesn't run continuously. For micro-controller control, I

I am currently using Xloader up update firmware 1.08. Has been uploading for over an hour. I do see numbers changing on uBitX screen ie e6:f0e4e4e4. Should it take this long or am I missing

I don't know what it may be, but you are really missing something. It should not take even 5 minuets to load. Check to see if you have the baud rate set to the correct value. de ku4pt

Thank you. Working OK now. 73 de Vince N1VIN

#1. let me say I've been known to stick my nose and many times my foot in place it doesn't belong. #2 .I lurk a lot -every day read the days' mailbag and read many posts- commenting on a few. #3. I am

He is reputable, he is NOT Amazon Prime 2 days shipping. Good things take time..

Amen! OIl, fresh, change often. C150 driver. Allison

Sorry to be a pedant, but that's me Allen: "their" is possessional, "there" is positional, required in this context. 73 Dex, ZL2DEX

Nice clean mod, Nigel...a lot neater than the way I did it. Does the CW sidetone still work? When I did it it killed the sidetone. I used M1 instead and that fixed that issue. I think there was some

I hear you there, Larry. It's like the fitful screeching that starts whenever someone brings up Glock vs. 1911, or stopping power vs. shot placement. I do try to put as much info in my posts when I