Date   
Re: Ubitx v6

CiccioSamui
 

Re: Does anybody know how to calibrate CEC firmware ?

Russ KR0EHM
 

I am still struggling with this.
I've used the master calibration worksheet and that really helped. However, this was not before getting an upconverter for my SDR so I could hear myself over a dummy load. That finally got me to where I could hear the outcome of my changes to the BFO.
I’m fairly certain I have the master calibration dialed in close enough. And FT8 is on the correct sideband now so I think I’m doing better on the BFO front as well.
WSPR beacon finally works and have been my first verified spots using the ubitx.
But receiving anything is incredibly difficult. I heard plenty of CW today because of the contest. SSB is another story. Where I know there are voices to be heard, they are very faint. The entire band is solid noise. (Granted I know there are plenty of other factors - and should I verify any of those absolutely first before assuming it’s still a ubitx/cec problem?)
Is there a certain range the BFO must fall within? (v5) and could there a radio have multiple “good/decent” settings for either the master calibration or the BFO?

Re: Ubitx v6

 

I agree with Mark.

I think that calling it uBitxv6 will confuse it with HFSIGNALS products. I suggest uBitxvC1 or something similar!

Raj


At 23/11/2019, you wrote:
Ciccio and others,
I must remind you all that if anyone (including Ciccio is interested), you can build and offer ubitx based radios on your own. the permission to do this is implicit in the license of the firmware and the open copy right of the hardware. this is an open source design. we started hfsignals because no one else was offering an SMD semi-kit.Â
- f

On Sat, Nov 23, 2019 at 8:04 AM CiccioSamui <Cicciosamui@... > wrote:
On Fri, Nov 22, 2019 at 02:44 PM, Mark - N7EKU wrote:
Good day Ciccio,

Your schematic image is still very small with low resolution.  Can you save it in a larger format (at least 1200 pixels tall) , or save it as a .svg image?

Maybe you can call it, "Ubitx vCiccio"   :-)

73,


Mark.

Mmmm.... Ok ok if you don't like it I can stop 

Re: Ubitx v6

 

Hi Ciccio,

You misunderstood me!  I was just suggesting you could use your name as a version because you are putting a lot of effort into it ☺

I salute your effort!


Mark

Re: Ubitx v6

MVS Sarma
 

what is there to think.
1. the sch is not clear and request for clearer sch is not yet heard.
2. You don't sell
3. nothing is FREE.

So IMHO  it is waste of website space.
Unless you come out  in clear.
wish you all the best of ubitx6_9


On Sat, Nov 23, 2019 at 1:41 AM CiccioSamui <Cicciosamui@...> wrote:
exactly how you think

Re: Bitx40

Curt
 

OM in YO

Hang in there as rig building opportunities will come. Watch for QSX or get a QCX. Farhan explained the greatly diminished sales. There always seems to be a rig opportunity over the horizon.

Curt wb8yyy

Re: Ubitx v6

Ashhar Farhan
 

Ciccio and others,
I must remind you all that if anyone (including Ciccio is interested), you can build and offer ubitx based radios on your own. the permission to do this is implicit in the license of the firmware and the open copy right of the hardware. this is an open source design. we started hfsignals because no one else was offering an SMD semi-kit. 
- f

On Sat, Nov 23, 2019 at 8:04 AM CiccioSamui <Cicciosamui@...> wrote:
On Fri, Nov 22, 2019 at 02:44 PM, Mark - N7EKU wrote:
Good day Ciccio,

Your schematic image is still very small with low resolution.  Can you save it in a larger format (at least 1200 pixels tall) , or save it as a .svg image?

Maybe you can call it, "Ubitx vCiccio"   :-)

73,


Mark.
Mmmm.... Ok ok if you don't like it I can stop 

Re: Ubitx v6

CiccioSamui
 

On Fri, Nov 22, 2019 at 02:44 PM, Mark - N7EKU wrote:
Good day Ciccio,

Your schematic image is still very small with low resolution.  Can you save it in a larger format (at least 1200 pixels tall) , or save it as a .svg image?

Maybe you can call it, "Ubitx vCiccio"   :-)

73,


Mark.
Mmmm.... Ok ok if you don't like it I can stop 

Re: Ubitx v6

 

Good day Ciccio,

Your schematic image is still very small with low resolution.  Can you save it in a larger format (at least 1200 pixels tall) , or save it as a .svg image?

Maybe you can call it, "Ubitx vCiccio"   :-)

73,


Mark.

Re: Ubitx v6

Richard Spohn
 

Fine. Do NOT call it a uBitx6, if it is NOT a uBitx6. It is not April. - Rich

On 11/22/19, Richard Spohn via Groups.Io <wb2gxm=gmail.com@groups.io> wrote:
OMG Yes! So there IS some value in procrastination!! - 73 Rich WB2GXM

On 11/22/19, CiccioSamui <Cicciosamui@...> wrote:
Stay bold the ubitx v6 is coming.....
With agc preampifier cw filter and much more....





Re: Ubitx v6

andy@...
 

My rule is:
     If you expect nothing you will never be dissapointed.................:)

Re: Ubitx v6

CiccioSamui
 

On Fri, Nov 22, 2019 at 12:03 PM, jim wrote:
 
Mostly ..when something sounds too good to be true, it probably is
 
Jim

exactly how you think


 

Re: Ubitx v6

CiccioSamui
 

On Fri, Nov 22, 2019 at 12:50 PM, Richard Spohn wrote:
OMG Yes! So there IS some value in procrastination!! - 73 Rich WB2GXM

On 11/22/19, CiccioSamui <Cicciosamui@...> wrote:
Stay bold the ubitx v6 is coming.....
With agc preampifier cw filter and much more....


procrastination????  No please is just an upgrade. 

Re: Ubitx v6

Richard Spohn
 

OMG Yes! So there IS some value in procrastination!! - 73 Rich WB2GXM

On 11/22/19, CiccioSamui <Cicciosamui@...> wrote:
Stay bold the ubitx v6 is coming.....
With agc preampifier cw filter and much more....



Re: Ubitx v6

CiccioSamui
 

I just made a folder within a (I hope)  a more bigger image

Re: Ubitx v6

CiccioSamui
 

It's my project not from hfsignals

Re: Ubitx v6

jim
 

Mostly ..when something sounds too good to be true, it probably is

Jim

On Friday, November 22, 2019, 8:00:42 PM UTC, Jack Brabham - KZ5A <kz5a@...> wrote:


This smells like a hoax.   I tried to check the hfsignals website and it appears to be fubar'd.

73 Jack KZ5A








On 11/22/2019 12:05 PM, Balasubramanyan Cp wrote:
AVAILABILITY uBITX V6

Is it available to purchase?

73s

Balsun. VU2UYC


Re: Ubitx v6

Jack Brabham - KZ5A
 

This smells like a hoax.   I tried to check the hfsignals website and it appears to be fubar'd.

73 Jack KZ5A








On 11/22/2019 12:05 PM, Balasubramanyan Cp wrote:
AVAILABILITY uBITX V6

Is it available to purchase?

73s

Balsun. VU2UYC


Re: Ubitx v6

Balasubramanyan Cp
 

AVAILABILITY uBITX V6

Is it available to purchase?

73s

Balsun. VU2UYC

Re: Ubitx v6

Ashhar Farhan
 

the circuit is too fuzzy. perhaps you could post a hi res version?

- f

On Fri, Nov 22, 2019 at 10:51 PM CiccioSamui <Cicciosamui@...> wrote:
Some things