Date   
nextion 2.8 installation

dave
 

hello men
trying to install a nextion 2.8 screen after many trials I am getting a message '1st SD card update' then 'model does not match' device model nx 32242028_011R'.
Have loaded to micro sd card : -ubitx_TJC_28.tft.
Any ideas?

Re: uBitx Digi-Interface Module (Add-on Board)

Joe Puma
 

Thanks Gordon,

I have mistaken yours for another digital board on that and someone followed up with your empty board.  What I really liked about the other board which link is posted in the OM is posted, is that is came with the a RF out trim.  I needed that as well. All this can be done with various parts but I liked the all in one board that has a sound fob, audio filtering and other options Mounted on it.  Thanks for the encouragement that I could build my own and to explore the techniques to do so.  I would like to try that in the future but for now I was just looking if anyone has the board from my OP. 

Cheers,
73
Joe
KD2NFC 



On Dec 29, 2019, at 4:25 AM, Gordon Gibby <docvacuumtubes@...> wrote:


yes, kit-projects has been great to help make this available.   And the GERBERS  (https://www.qsl.net/nf4rc/Tech/Plated_Through.zip ) are out there for free and anyone can order 5 or 10 cards from china and have them in a week.   and learn a bunch in the process!    Point to point can always be done also -- there are a zillion different pages out there all with basically the same information, from which i learned as well.   Great chance to learn more about electronics.  homebrew "manual" also available:   https://qsl.net/nf4rc/2019/SmallBoxSoundCardInterfaceManual2.2.pdf    I went through various iterations, so you have to pay a bit of attention, but none of that is very crucial....using a 2.2K resistor instead of a 2K isn't going to make a hill of beans difference in that design, for example!!!    



On Sat, Dec 28, 2019 at 8:28 PM Bill <groups191227@...> wrote:
Looks like there are still some bare boards available.  $3.
 
 
 - Bill
 

Re: New uBITX Ver. 6 Assembled Today

Evan Hand
 

When I connect to the web page provided on my computer (Windows 10) without a microphone, I get just the instructions.  When I connect to the same page on my laptop, also Windows10, with a mic, I get the graphics showing the current audio spectrum.  See the screen shot in pdf format attached.

I would suggest you verify that you have a source of audio that the page can access.

73
Evan
AC9TU

Re: V6 alternative software

Jim Sheldon
 

The simple answer is NO it won't. The display would have to be a NEXTION and connected properly. It would not be able to mount on the V6 Raduino as currently configured.

W0EB

------ Original Message ------
From: "Richard Spohn" <wb2gxm@...>
To: "BITX20" <BITX20@groups.io>
Sent: 12/29/2019 4:42:02 AM
Subject: [BITX20] V6 alternative software

Will the CEC software work on the new v6 uBitx and its stock TFT
display? I much prefer the CEC GUI shown on the Nextion TFTs. - Rich
WB2GXM


Re: New uBITX Ver. 6 Assembled Today

David Wilcox
 

OK.  I downloaded the program in Chrome on my iPad Pro and get the very same thing I saw during the regular down load.... instructions but no program to generate to es or what ever it is supposed to do.

Dave K8WPE



On Sunday, December 29, 2019, 07:06:37 AM CST, Ashhar Farhan <farhanbox@...> wrote:


It requires chrome. Install chrome and check it out?

On Sun 29 Dec, 2019, 5:14 PM David Wilcox via Groups.Io, <Djwilcox01=yahoo.com@groups.io> wrote:
So this won’t work on an iPad Pro?  All I get is some instructions, but no working program.  Does this require an Android phone?

David J. Wilcox K8WPE’s iPad

On Dec 28, 2019, at 7:27 PM, Bert N8NN <bertgarcia73@...> wrote:

OK...!  Used the https://www.hfsignals.com/index.php/bfo-tuning-aid/ website on my cellphone and it worked!  I can now hear a difference in filtering between LSB and USB.  Thank you.

Bert N8NN

Re: New uBITX Ver. 6 Assembled Today

Ashhar Farhan
 

It requires chrome. Install chrome and check it out?


On Sun 29 Dec, 2019, 5:14 PM David Wilcox via Groups.Io, <Djwilcox01=yahoo.com@groups.io> wrote:
So this won’t work on an iPad Pro?  All I get is some instructions, but no working program.  Does this require an Android phone?

David J. Wilcox K8WPE’s iPad

On Dec 28, 2019, at 7:27 PM, Bert N8NN <bertgarcia73@...> wrote:

OK...!  Used the https://www.hfsignals.com/index.php/bfo-tuning-aid/ website on my cellphone and it worked!  I can now hear a difference in filtering between LSB and USB.  Thank you.

Bert N8NN

Re: V6 alternative software

GM4CID
 

Well if you replace the standard SPI display with a configured Nextion there is a good chance that the CEC sketch suitably configured will work.

Re: New uBITX Ver. 6 Assembled Today

David Wilcox
 

So this won’t work on an iPad Pro?  All I get is some instructions, but no working program.  Does this require an Android phone?

David J. Wilcox K8WPE’s iPad

On Dec 28, 2019, at 7:27 PM, Bert N8NN <bertgarcia73@...> wrote:

OK...!  Used the https://www.hfsignals.com/index.php/bfo-tuning-aid/ website on my cellphone and it worked!  I can now hear a difference in filtering between LSB and USB.  Thank you.

Bert N8NN

V6 alternative software

Richard Spohn
 

Will the CEC software work on the new v6 uBitx and its stock TFT
display? I much prefer the CEC GUI shown on the Nextion TFTs. - Rich
WB2GXM

Re: FS: uBitX V5 Board Set - Brand New - Unused

Richard Spohn
 

Jim, is the v5 still available? If so I would like to purchase - Rich WB2GXM

On 12/23/19, Jim WB2LHP in MI <jmarco1955@...> wrote:
I just bought these but have decided to go in a different direction. These
uBitX V5 Main and Raduino boards are brand new, unused, in the original
packaging...$100 shipped...PayPal only...Thanks for looking...Jim WB2LHP



In search of uBitx v5

Richard Spohn
 

Re: [BITX20] FS: uBitX V5 Board Set - Brand New - Unused

Is the uBitx v5 still available? I am looking to purchase a new v5
uBitx, thanks - Rich WB2GXM

Re: For Sale: v4 board plus Axicom relays AGC and filter boards etc. #parts #nextion #v4 #ubitx #filters

Dave Dixon
 

Hello Derek,
                   are the items still available?Regards Dave.












On Sat, 28 Dec 2019 at 15:39, derek (G4VWI) via Groups.Io <derek.g4vwi=talk21.com@groups.io> wrote:
I have lots of unused spares including a complete v4 board with raduino/display available.

Prefer to ship within the UK due to postal charges.
Having now completed a number of QCX and a uBitX projects someone may find these parts ideal for a new build or experimentation.
v4 board with raduino and display supplied in original plastic case plus leads plugs and sockets.
Axicom relays x5 [Farnell Code:2533099] new unopened package.
VK4PLN AGC board SMD fully populated [ND6T design unused].
VK4PLN AGC board SMD unpopulated [ND6T design new unused].
K5BCQ AGC x2 fully populated [not used].
VK4PP 45Mhz filter board x2 rev.03. Plus 45Mhz filters. Matched pair  [3 pin type T45U15BG new unused].
Nextion enhanced 2.8inch OEM display boxed. ALL £70.00 including PP.
Many thanks. Derek G4VWI 

Re: TFT Raduino upgrade for V3 uBiTx ?

Gordon Gibby
 

Hi, there are a TON of ways to replace the raduino, google is your friend, multiple people have provided different projects for that.  Adafruit has a product with the si5351 already solderred in, and you can leverage that product easily.   I created an external VFO using that board and publihsed the gerbers somewhere.   There are people here who have for-sale versions of more refined products.   Google is your friend!



On Sun, Dec 29, 2019 at 1:02 AM vk3xl via Groups.Io <vk3xl=yahoo.com.au@groups.io> wrote:
I have an early V3 that I have managed to kill the Si5351 so was wondering if it is possible to upgrade the raduino to the new V6 type. My eyes are not good enough to replace the si5351. I have sent an email to hfsignals about 2 weeks ago, but have not received a reply.
Failing that are there any other raduino replacements out there that are worth considering?
--
Mike VK3XL

Re: uBitx Digi-Interface Module (Add-on Board)

Gordon Gibby
 

yes, kit-projects has been great to help make this available.   And the GERBERS  (https://www.qsl.net/nf4rc/Tech/Plated_Through.zip ) are out there for free and anyone can order 5 or 10 cards from china and have them in a week.   and learn a bunch in the process!    Point to point can always be done also -- there are a zillion different pages out there all with basically the same information, from which i learned as well.   Great chance to learn more about electronics.  homebrew "manual" also available:   https://qsl.net/nf4rc/2019/SmallBoxSoundCardInterfaceManual2.2.pdf    I went through various iterations, so you have to pay a bit of attention, but none of that is very crucial....using a 2.2K resistor instead of a 2K isn't going to make a hill of beans difference in that design, for example!!!    



On Sat, Dec 28, 2019 at 8:28 PM Bill <groups191227@...> wrote:
Looks like there are still some bare boards available.  $3.
 
 
 - Bill
 

Re: REPLACEMENT RADUINO

Herman Scheper
 

Hfsignals@... is the adress. 

Herman vanaf z'n IPad.

Op 29 dec. 2019 om 07:04 heeft vk3xl via Groups.Io <vk3xl@...> het volgende geschreven:

is that a gmail address. all i get is hfsignals@...

--
Mike VK3XL

Re: uBITx #ubitx

Ashhar Farhan
 

you will have to write to hfsiganls@..., this group only discusses the technical aspects of the radio and we can help with getting it up and going.
73, f

On Sun, Dec 29, 2019 at 11:46 AM <rmvanb@...> wrote:
Hello, i orderd my v6 complete pakkage last week. I payed by paypal but i didn't received any trackking code or anouncement that you received the mony and that you wil send it to my house in the Netherlands?????
Regards
Rene

Re: REPLACEMENT RADUINO

vk3xl@...
 

Thanks Raj. I emailed then 2 weeks ago to that address and have not had a reply. I thought I may have had the wrong email address. Its Christmas so I will not get to impatient yet. I know they will be busy with all the V6 orders.
Thanks again, I will go back to waiting.....
--
Mike VK3XL

Re: REPLACEMENT RADUINO

 


hfsignals AT gmail.com


At 29-12-19, you wrote:
is that a gmail address. all i get is hfsignals@...

--
Mike VK3XL

uBITx #ubitx

Rene
 

Hello, i orderd my v6 complete pakkage last week. I payed by paypal but i didn't received any trackking code or anouncement that you received the mony and that you wil send it to my house in the Netherlands?????
Regards
Rene

Re: REPLACEMENT RADUINO

vk3xl@...
 

is that a gmail address. all i get is hfsignals@...

--
Mike VK3XL