Does anyone have a uBITX v5 kit, unfinished, that they are not interested in completing? I'd like to build a "twin" to my existing uBITX v5. Would rather use a v5 than a v6 due to the extra

Use an ohmmeter to check for resistance. _._

It's normally black as it has come carbon to give anti static continuity. Get Outlook for Android From: BITX20@groups.io <BITX20@groups.io> on behalf of David Alexander <oldbeeman@...> Sent: Sunday,

does anyone know if there is a way to verify that foam is ok to use to protect parts from electrostatic charges? i have black, or pink foam that came with parts but would like

Really good point Gary! Never thought of that one as I always have shut off all power saving routines on my desktop computers and that’s the only computer(s) I use for programming. W0EB

You Find the manuals on the site: https://amateurradiokits.in/easy-bitx-version-1/ There are also the notes for build the 40m version. You will also find references to videos for 15 step building on

Dennis, Could it be an issue with your USB ports in power saving mode? I run a handful of USB Jlink debuggers in an experimental setting, they are powered from the target board (so I can power down/

I don’t have a specific one, just make sure it is a data cable, not a phone charging cable which only has power &ground connections.

PJRC sells a good one. I too have no issue with the teensy 4.1 and win 10 running 1.8.13. Barry K3bo

"I've had USB cables fail numerous times, especially with cheap ones ordered off Amazon, especially after they have been plugged and unplugged many times." OK, can you give me a supplier/part number

I can confirm the Win10 update a couple of days ago and I'm having no problems with my T4.1. Jack, W8TEE On Sunday, December 20, 2020,

One other possibility that I have run into before -- change your USB cable. It may be there is a problem in the cable itself. I've had USB cables fail numerous times, especially with cheap ones

I was wondering what it looked like with the eyelets. They weren't included when I built my amp. Thanks for the picture. Leonard

This occurs both when I am using the V6 Clone board (powered with 12VDC and the jumper cut) and with boards that do not have a cut jumper. OR, I have become like Joe Btfsplk from the Lil Abner comic

Hi all. I was wondering if anyone out there knows of any videos on the build of this transceiver? I am going to build mine for 40m. Thanks

Original QST Wa2eby article from Marchand April 1999

Easiest thing is to go to Diz’s site, https://www.kitsandparts.com/, click on “WA2EBY Toroid Kit”, then on “”WA2EBY Broadband HF Amplifier”” you will find links to Leonard’s stuff and

One more possibility Dennis, if you have cut that tiny jumper on the back of the Teensy (either 4.0 or 4.1), you need to have the teensy plugged into the Raduino (clone or factory board with the 4.0

I seldom get hung. Pressing the reset button on the T4.1 always worked for me. Ron On Sunday, December 20, 2020, 9:20:48 AM EST, Dennis

To reiterate - I have tried three different WIN10 computers and four different Teensy 4.1 boards. I have tried to get answers from the PJRC forum but they all recommend the very things I have