Gerard, The vfoA and vfoB are two places where you can set the frequency of operation. They can be two different values to allow to switch between them, or they can be set to receive on vfoA and

Evan, Jack, Evan, jack, May you confirm one thing. Are these two values fixed and never changed?? I don't understood: i fixed these values with the manager, after close normally the connexion. i

Hi, tnx for reply, Was not aware on Keyer menu. Am a bit elderly, how do I access it? All best, Dave

-- Hi Mick, glad that you found my post on checking the mic audio frequency response helpful. Setting the UBITX SSB audio up properly will only further add to the acceptance of UBITX transcievers in

How could you make the bandwidth narrower??

Your preference may differ; a slightly more high-ended audio response in TX can help with poor conditions, especially with lower-powered transmitters. That is, "broadcast" quality mic response isn't

Typo. Should have read: I had a somewhat loose connection on my stereo straight key plug.....

I had a somewhat loose connection on my att as iffy key plug recently. It would key up my commercial rig fine but wouldn’t work on my v6 Ubitx. I had used a cheap stereo plug and the internal

did you select straight key from the keyer menu? 73, Bill KU8H bark less - wag more

Really like v6, can’t get cw with single key, any suggestions?

Thank You Rob!! Ive been fiddling with this for a while and never quite getting the VFO “perfect”. It was close but I was being told my audio was a little tinny. I found my VFO setting put my

Aaron, Sorry, was trying to point to the original file location in case there was an update. Attached is the PDF that I have. 73 Evan AC9TU

hello, Thank's for the answers The view plays tricks on me, I saw a zero more. thanks for the explanations. I’ll do tests this afternoon cd

Your choices are almost endless! Look on ubitx.net for examples as all earlier versions came without cases and many inventive solutions were found. I have used the plastic instrument case from Bangood

Can’t seem to purchase it yet, though.... but I will when I can!

All: Page 110 of the October issue of QST runs this ad: For all who wrote to me asking questions about the book, I apologize for not answering those questions. I really wasn't free to say anything

Looks like your link to the PDF is broken. It is coming up like a piece of code. -- '72 Aaron Scott The K5ATG Blog Mid-Del Amateur Radio Club QRPARCI# 16443 GQRP# 16389 4SQRP # 1080

Yes go with the toothpick idea because tweezers can act like launch control if you squeeze too hard, ask me how I know. :( Skip Davis, NC9O

Gerard, I believe that there is a typo. Go back and count the zeros in the second capture you provided. To answer your question, vfoA and vfoB are memory locations where the program is storing the

So I have a uBitx v6 WITHOUT a case - any suggestions for a 3rd party case that has some room for adding some other stuff (power protection, CW filters, anything else I can think up, etc)?