anyone have a schematic and or know where to find one for the v4 as it has the board headers for 1

Nice work, Barb! I wondered how hard it would be to do that. =Vic=

Here we go again. It seems every time a new version of one of the Bitx products, calls to split the group, create subgroups, add hashtags, etc come up. It's not likely to happen and most folks here

Have you set the BFO?

great!

I swapped stock TFT with Nextion 2.8" TFT in my Ubitx V6 . Attached pdf is explaining the modification procedures. 73's Barb, WB2CBA

Thank you that is exactly what I need.

Propagation here at my qth is and has been very poor for a long time. In the documentation it states startup setup menu on power up and adjust for 10MHz base ref freq exactly then set the BFO

Farhan has said that his radios are for experimenters. I just got a v6, still having a 20 and two others in various stages of undress next to my work bench. Now I am interested in v6 but seeing the

For my other radios and raspberry pi, I just use a $4 sound dongle available at computer stores, Hamfest sand online. -- Bob NZ2Z

There is some information that is common to all versions, or to multiple versions. Splitting the group would defeat the purpose of a general information discussion group. Threads can be used to

Hello Dean, I noticed your post remained without replies. In the CEC software there is a separate setting for the VFO in CW mode. Go to settings and select Adjust CW VFO. Hope that helps. 73, John

Farhan, I assume you will sell the boards separately? Bob NZ2Z -- Bob NZ2Z

I'd guess it does get to 125 C for some of those putting a big display on an old Raduino with no heat sink for the LM7805. But probably won't destroy anything, just shut down when the LM7805 gets too

@Steve, The "17m won't work" isn't that 17m doesn't work, it's that the quick select button for 17m doesn't work. If you don't want to update the software, you don't have to - just tune to 17m

I just tried this. You will see "Unfollow this Topic" at the bottom of the email. Click on it and you will be asked to confirm. No more messages from that topic after that. -- Dale Hardin,

So how about the existing boards that we received at Christmas time, I believe that ALL should hear as to what will be for them. Regards. Steve AB2ET/4

"recommended operating temp is a junction temp of 125 C" If your running at 125C, you've got bigger problems. ;) Do or Do Not. There is no try. --- jgaffke@... wrote: From: "Jerry Gaffke via

If you go to your Subscription, Email Delivery, go to Advanced Preferences at bottom of page, click Following Only, click First Message Also. You will then get the first message of each new topic.

my last dialup BBS was maybe 24Kb. but last BBS was on the internet. and forums work better for ham radio I think. Wayne WA2YNE