Thank You Vic I just added FT817 as general FLdigi rig file but still unable to comm to UBITx unit. I will log into groups.io and look through the archives to see what I can find.

I believe that you will need to send an email to HFSignals@.... They do not offer parts separately on their web page. There are clones available from other suppliers. I would suggest you google

I could not find any for sale on their website but I will have another look. Thanks guys --

The uBitx raduino board is the same AFAIK. Just ask for one fromHFSIGNALS. You can upload bitx40 sketch in to it. Raj

Merci pout ta réponse Vic, mais je suis tellement impatient de le recevoir que quelques semaines va me sembler une éternité. 73 Daniel

Hello Mark, I Also have a bitx 40 board but missing the raduino and found the same as you so its sat here waiting..Regards Dave G0AYD FISTS15892 CWOPS 2159.

I believe I read that after rushing to get the first shipments out they were taking a couple of weeks off before filling more orders. Patience! Je crois avoir lu qu'après s'être précipité pour

In general, the uBitX emulates a Yaesu FT817 for CAT commands. There is another thread where the appropriate com settings is discussed. =Vic=

On 2020-01-04 19:20, Andy_501 via Groups.Io wrote: Found the "Tune" button but will not adjust to 10000 exactly as required only hits 10500 then 9000 + below or 11000

Looks like this one means further research into types of jacks used. Is this a help/community forum or a developer's forum?

It apparently was rejected by groups.io for posting so att below instead and moderator can place it in logical location.

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the BITX20@groups.io group. Uploaded By:Andy_501

Bonjour à tous, J"ai passé une commande de ubitx v6 depuis le 17/12/2019 et jusqu’à ce jour je n'ai eu aucune nouvelle de HF signal sauf qu"ils ont bien reçu ma commande et le paiement, Que

HA! Groups.io really doesn't want email addresses, so my post above got censored a bit, it would seem. On step 9, "A@...:LSB" should read "A @ 7040.20 : LSB" (spaces added to avoid censorship) On step

Joel and @klimber - I created a new thread to discuss the one_stop_settings branch issues: https://groups.io/g/BITX20/topic/one_stop_setting_debugging/69432630 If you have any further feedback on that

This is a discussion I'm splitting off from https://groups.io/g/BITX20/message/74440 and https://groups.io/g/BITX20/message/74449, where Joel and Armando indicated that the software branch

Is there an xml rig fle for FLDigi /FLrig  that I can download to get Flrig comms with V6? If so what is the link to get it? Thanks Andy

Well now it refuses to compile on the Raspberry Pi4?? DK9SAS I changed the name as you suggested Jack, I miss-typed. It is EEPROPM but when I go to compile I get and error message Setup.cpp:2134:10:

I know the bitx40 has ceased production, but are there any Raduino modules still available? Obviously nothing found on HFsignals web site. Thanks for any info. 73 Mark --

@klimber, PDQ branch is very close to the stock firmware. I made changes to get the screen draw speed up, but tried to avoid changing anything else. Hopefully Ashhar will accept the PR, and then I can