https://en.wikipedia.org/wiki/Delimara_Transmitter As I said, they originally had a 3 el vertical array on MW but one of the masts had collapsed when one of the parafil guys melted due to the high

Agree with you. 2mH is too large and it must have been simply for static discharge. Many moons ago when I used to service TVs I always put a 4 turn air spaced coil across the tuner antenna input. I

I have a similar case on a v4. The bottom front board mounts too close to the bottom and with flex can touch the bottom of the case. I tried adding kapton tape and trimmed the solder points pretty

I don't have their kit, but I have the EU1KY analyzer from that site. It's been awesome. I'm running Ian's firmware on it. -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT d--- s+: a C++++

i hope someone responds too, as i'd like to see their thoughts. it seemed like the 'easy button' as far as setup went, so i jumped on it. ...i bought this, along with a kit last month, but i won't be

I have bought two of those displays from them, and neither worked. The larger displays I have (5 from different sources) do not use the same pin out as the regular ones. The last two pins are

Has any used this board in their ubitx, and if so, how's it working? How was the installation? Any gotchas? https://www.elekitsorparts.com/product/ubitx-digi-interface-module-add-on-board JP K5AXL

Greetings all, Same here. I assembled my UBITx about 6 months ago into the amateurradiokits.com (Sunil) and had to grind off the screw hole bumps on the bottom of the case, took me a while to figure

please not on the reflector

To All, Does anyone know where I can get a copy of the current 5.1 ubitx software manual? Does it exist? What about the KD8CEC ver 1.2? software/firmware manual? The only one I can find is KD8CEC's

Following the procedure I downloaded the firmware version 1.095. Everything works perfectly. What is the procedure to update the firmware with the next version 1.097 or 1.1? You can help me. Thanks

Hamp, I don't know if you ever got your reply from Al but I just made his adapter for my uBitx 5 and it works great. I made it just like the picture and schematic. Hope this helps, 73's Paul KD9JYV

I would love to see the list Bill

I have a ubitx   original in a tentec enclosure and a 40 meter ssb bitx in a plastic enclosure for sale. Both work as expected....  so many projects ....TOO many projects,,, 60 USD for the

Got mine today - excellent solution. From flaying in the wind to rock solid. Thanks, Mike WA0YCN

2.2mH is a large value. I guess its purpose be protection against statics. 1uH has is a low impedance at MW providing some highpass but maybe not enough in presence of a nearby station. Try it in any

Thanks

Lots of data here already. An AM station antenna is actually the very tall tower itself, should be easy to see where it is. But you might have other interference sources there. If you can take your

I found this and ordered it yesterday: https://www.aliexpress.com/item/32918944488.html?spm=a2g0s.9042311.0.0.596e4c4dwMp66E Van: BITX20@groups.io <BITX20@groups.io> Namens

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.fr%2Fulk%2Fitm%2F274081704259 Like that?