Date   

Re: Bitx40 AGC Has arrived (bit late I know)

RICHARD <k6kwq@...>
 

Looks like it worked that time an paypal has paid you. Thanks

 

Sent from Mail for Windows 10

 

From: KE2GKB via Groups.Io
Sent: Wednesday, December 4, 2019 8:33 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Bitx40 AGC Has arrived (bit late I know)

 

Sent you an Email so we can figure out whats going on! 

 

On Wed, Dec 4, 2019 at 11:21 PM RICHARD <k6kwq@...> wrote:

Something is wrong with your site it will not let me order one with paypal.  Please save me one

 

Sent from Mail for Windows 10

 

From: N8DAH
Sent: Wednesday, December 4, 2019 8:06 PM
To: BITX20@groups.io
Subject: [BITX20] Bitx40 AGC Has arrived (bit late I know)

 

A bit later than we had wanted but we are now offering a AGC solder in mod for the Bitx40 Radios!

https://shop.kit-projects.com/index.php?route=product/product&path=59&product_id=123
73
--
David

 N8DAH
Kit-Projects.com

Shop is open!

 


--
Tim Keller - KE2GKB
https://shop.kit-projects.com

 


Re: Bitx40 AGC Has arrived (bit late I know)

 

Try login and look in your cart and clear it before you try again.

If that don't work let me know we can work something else out.

We did check the site and all is in working order.
--
David

 N8DAH
Kit-Projects.com

Shop is open!


Re: Bitx40 AGC Has arrived (bit late I know)

RICHARD <k6kwq@...>
 

Tried again now its trying to sell me 3 of them   Help

 

Sent from Mail for Windows 10

 

From: KE2GKB via Groups.Io
Sent: Wednesday, December 4, 2019 8:33 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Bitx40 AGC Has arrived (bit late I know)

 

Sent you an Email so we can figure out whats going on! 

 

On Wed, Dec 4, 2019 at 11:21 PM RICHARD <k6kwq@...> wrote:

Something is wrong with your site it will not let me order one with paypal.  Please save me one

 

Sent from Mail for Windows 10

 

From: N8DAH
Sent: Wednesday, December 4, 2019 8:06 PM
To: BITX20@groups.io
Subject: [BITX20] Bitx40 AGC Has arrived (bit late I know)

 

A bit later than we had wanted but we are now offering a AGC solder in mod for the Bitx40 Radios!

https://shop.kit-projects.com/index.php?route=product/product&path=59&product_id=123
73
--
David

 N8DAH
Kit-Projects.com

Shop is open!

 


--
Tim Keller - KE2GKB
https://shop.kit-projects.com

 


Re: standalone signal analyzer firmware hex file

 

Talmadge, my mistake.

Bob, try kit-projects.com for now I just changed hosts working out a few bugs

--
David

 N8DAH
Kit-Projects.com

Shop is open!


Re: Constant loud hum or buzz on receive #ubitx-help #v5

Gavin
 

Thanks for all the suggestions so far! I will try them out and see what I come up with. Hopefully I'll figure it out and post back to say what I had to do.


Re: #uBitx #v4 and #sdr panadapter #ubitx #v4 #sdr

Cory King
 

Hey David,

Just got one of those G4HUP adapters.  Any chance you could post pics of how you installed it?


Re: WTB uBITX Harness and Controls

Cory King
 

Not at all trying to derail this question, but anybody know exactly what the connector types this thing uses are called?  I'd love to order some extras up from mouser or something...


Re: Constant loud hum or buzz on receive #ubitx-help #v5

Cory King
 


Put it in a metal case and your issues will probably go away 
I wonder if you could test the "common ground" theory out by just using a wire to ground one jack to another and see if it causes any change?  If it does, you might be onto something but do note that there are lots of folks running this thing inside plastic cases.

On my rig, I've noticed that that volume control wire is pretty sensitive and if it rests across the wrong thing, I get a hum/buzz.  I say this 'cause in one photo the OP has the power switch wire near the volume wires.

Gavin, have you tried just jiggling all the wires & jacks and seeing if that changes the nature of the sound?  Sometimes a little percussive maintenance is all that is required :-)


Re: standalone signal analyzer firmware hex file

Bob Benedict, KD8CGH
 

David
  http://www.kit-projects.com/ -> 404 not found
      Bob


A replacement for the Raduino

N6QWHAM@...
 

Having received a third hand Bitx40 I was faced with the problem that the Raduino was not providing the LO signal output.  When you know some stuff you can do some stuff so I ginned up a new source that provides both the LO and BFO signals and along the way added two VFO's, USB/LSB Select and a TUNE Tone. I now have this working on FT-8 and WSPR. See the details at http://n6qw.blogspot.com.

If you want the code there is an email link on the blog. Did I also mention it has a cool Green Letter LCD.

BTW I am also looking to add a 6 Meter Transverter to this project --still in the noodling stages. If anyone wants to sell a Bitx40 -- I have a crisp $10 plus US shipping for you. Same email address

73's
Pete N6QW


Re: standalone signal analyzer firmware hex file

talmadge huckabee
 

ok thank you very much


-----Original Message-----
From: Evan Hand <elhandjr@...>
To: BITX20 <BITX20@groups.io>
Sent: Thu, Dec 5, 2019 10:09 am
Subject: Re: [BITX20] standalone signal analyzer firmware hex file

More links:
You can download the firmware file from the link below.
https://github.com/phdlee/dspmeterv1/releases/download/V0.80/CEC_I2C_Meter_V0.8.zip

If you need a source file, please click below.
https://github.com/phdlee/dspmeterv1/releases/tag/V0.80
 
For more information on how to update your firmware, go to http://www.hamskey.com
73
Evan
AC9TU


Re: standalone signal analyzer firmware hex file

Evan Hand
 

More links:
You can download the firmware file from the link below.
https://github.com/phdlee/dspmeterv1/releases/download/V0.80/CEC_I2C_Meter_V0.8.zip

If you need a source file, please click below.
https://github.com/phdlee/dspmeterv1/releases/tag/V0.80
 
For more information on how to update your firmware, go to http://www.hamskey.com
73
Evan
AC9TU


Re: standalone signal analyzer firmware hex file

Evan Hand
 

There should be a link on the KD8CEC HamsKey sight for the mod and the software.

You can start with these links:
http://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type.html
http://www.hamskey.com/2018/07/standalone-signal-analyzer-i2c-type_29.html

73
Evan
AC9TU


Re: standalone signal analyzer firmware hex file

talmadge huckabee
 

I2C Type Signal-Meter
Sorry David I did not mean the antenna analyzer, I meant   I2C Signal-meter firmware that goes in the extra Nano  board
in the Ubitx for a signal analyzer

-----Original Message----- 
From: N8DAH <Dherron@...>
To: BITX20 <BITX20@groups.io>
Sent: Wed, Dec 4, 2019 8:47 pm
Subject: Re: [BITX20] standalone signal analyzer firmware hex file

Here is the latest version in hex form.
73
--
David


Re: Constant loud hum or buzz on receive #ubitx-help #v5

Mike Short <ai4ns.mike.spam@...>
 

You do not have a common ground. The mic, key, antenna shields and power should all be connected together. Put it in a metal case and your issues will probably go away 


Re: Relay and potentiometer solution (Bill K9HZ) #v5

Dale Hardin
 

On Thu, Dec 5, 2019 at 12:44 AM, MadRadioModder wrote:
Thanks.  I happen to have designed a board for that solution, so I just need to make sure it works :)  I saw that there is a cap/resister mod needed also.  I wonder if there are any more I should know about.  V5 should be here early next week.  Thanks, Dale

 
--
Dale Hardin, KS4NS
Elberta, AL


WTB uBITX Harness and Controls

Dale Hardin
 

I need a set of harness and controls for my uBITx V3.  The original owner kept his already installed parts.  If you have a set to spare, please pm me with price and Paypal ID.  Thanks in advance, Dale
--
Dale Hardin, KS4NS
Elberta, AL


Re: Constant loud hum or buzz on receive #ubitx-help #v5

_Dave_ AD0B
 

I would look at your power supply first. It is probably a switching power supply and the power getting out of it is not filtered enough. Try using a 12v battery as a test to see if the hum diminishes.
--
73
Dave
k0mbt
Raduino bracket and Ham_Made_Keys


Re: Spare board

Ted
 

Many thanks to those who answered the call.  Solutions are underway. You are all a good bunch with whom I'm happy to work and serve through our hobby.


Ted
K3RTA


Re: Relay and potentiometer solution (Bill K9HZ) #v5

MadRadioModder
 

Looking at the circuit, It can be.  It will work on v5 too.  Just get the relay connections right. 


MRM

 


On Dec 4, 2019, at 8:19 PM, Dale Hardin <joe.dale.hardin@...> wrote:

Does this solution need to be applied to the V5 board in order to balance output among bands?
--
Dale Hardin, KS4NS
Elberta, AL

--

…_. _._

13941 - 13960 of 86609