Date   

Re: Taa-Daa

Robert Freeman
 

Very nice work.  I’m appreciative of your contributions that help us all to learn. 

Warm regards,

Robert, NQ0T 


Re: Taa-Daa

Jack, W8TEE
 

The problem with the new Teensy (T4) is that its small size forced some of the I/O pins to be moved to the bottom side of the board. That would entail a total redesign of the JackAl board because we use a lot of pins on it. Some of the JackAl functionality is separated out into projects in the new book. JackAl is probably more cost effective, since it combines that functionality into one board, plus add features we don't cover in the book.

Jack, W8TEE

On Thursday, November 28, 2019, 2:57:44 PM EST, Goran Skular <goran.skular@...> wrote:


Perfect. Congratulations!

Why not include JackAl also?

BTW, I can't wait to order one.. or maybe wait for new teensy version :)

On Thu, 28 Nov 2019, 19:39 Jack, W8TEE via Groups.Io, <jjpurdum=yahoo.com@groups.io> wrote:
All:

Most of you are aware that Al (AC8GY) and I are working on a sequel to the Projects book titled Microcontroller Projects for Amateur Radio. We changed the title because we have not limited ourselves to the Arduino family of processors, but include the STM32F1, ESP32, and the Teensy 4.0 controllers. All can be (and, for the book, are) programmed in the Arduino IDE using C. Today, Al and I finished writing the narrative for the last chapter of the book.

We have signed with the ARRL to publish the book, and one reason for signing with them is that they had enough faith to sign a contract with us, but allow us to finish all of the projects before submitting the chapters. That way, Al and I could work in the absence of a publisher breathing down our necks. That's the good news. The bad news is that, despite us beating our Jan 1, 2020, deadline, they are putting the new License manual ahead of us in the production queue. (Boo !) I asked if it would be ready by FDIM and they said no. That was a huge disappointment, but it is what it is. I'm still hopeful it will be out before the end of the second quarter of next year. Still, we feel like a 15 month stone has been lifted off our backs.

Anyway, what follows are some photos of most of the projects. I'll keep everyone posted on publishing details when I know them.

Jack, W8TEE
Al, AC8GY

two channel DSP (there's a preprocessor project, too)
Inline image
Signal generator, up to 30MHz.
Inline image

All kinds of test functions (i.e., different wave forms at various voltages)
Inline image

30W mini DL with watt meter (almost fits in a shirt pocket)
Inline image
Old computer PS redesigned for powering the projects.
Inline image
Morse Code Tutor (the subject of my FDIM presentation this year)
Inline image
Antenna tuner with SWR display and scan function (very useful for trimming antennas)
Inline image
Our Mag loop with remote controller (tested to 100' and used in Field Day).

Inline image



--
Jack, W8TEE

--
Jack, W8TEE


Re: For Sale: BITX40 and µBITX

Jack, W8TEE
 

JackAl does not have CAT control, but since you have the source and lots of memory resources, there's no reason it can't be added.

Jack, W8TEE

On Thursday, November 28, 2019, 3:12:30 PM EST, Goran Skular <goran.skular@...> wrote:


I am waiting for a new ubitx.. ordered yesterday.

And soon I will order jackAl for it (orders are closed now).

I have some questions though..

Is it better to wait for an upgraded jackal with a new teensy?

Also, does JackAl provide both audio and serial cat control through USB connection (teensy can emulate more usb devices when connected to pc.. bit I don't know if it is supported with jackal fw)?

--
Jack, W8TEE


Re: Taa-Daa

Mark Hatch
 

Oh wow! Better get the JackAl done so I have room. What a great set of projects. Thank you!

73
Mark
AJ6CU


Re: For Sale: BITX40 and µBITX

Goran Skular
 

I am waiting for a new ubitx.. ordered yesterday.

And soon I will order jackAl for it (orders are closed now).

I have some questions though..

Is it better to wait for an upgraded jackal with a new teensy?

Also, does JackAl provide both audio and serial cat control through USB connection (teensy can emulate more usb devices when connected to pc.. bit I don't know if it is supported with jackal fw)?


Re: Taa-Daa

Goran Skular
 

Perfect. Congratulations!

Why not include JackAl also?

BTW, I can't wait to order one.. or maybe wait for new teensy version :)


On Thu, 28 Nov 2019, 19:39 Jack, W8TEE via Groups.Io, <jjpurdum=yahoo.com@groups.io> wrote:
All:

Most of you are aware that Al (AC8GY) and I are working on a sequel to the Projects book titled Microcontroller Projects for Amateur Radio. We changed the title because we have not limited ourselves to the Arduino family of processors, but include the STM32F1, ESP32, and the Teensy 4.0 controllers. All can be (and, for the book, are) programmed in the Arduino IDE using C. Today, Al and I finished writing the narrative for the last chapter of the book.

We have signed with the ARRL to publish the book, and one reason for signing with them is that they had enough faith to sign a contract with us, but allow us to finish all of the projects before submitting the chapters. That way, Al and I could work in the absence of a publisher breathing down our necks. That's the good news. The bad news is that, despite us beating our Jan 1, 2020, deadline, they are putting the new License manual ahead of us in the production queue. (Boo !) I asked if it would be ready by FDIM and they said no. That was a huge disappointment, but it is what it is. I'm still hopeful it will be out before the end of the second quarter of next year. Still, we feel like a 15 month stone has been lifted off our backs.

Anyway, what follows are some photos of most of the projects. I'll keep everyone posted on publishing details when I know them.

Jack, W8TEE
Al, AC8GY

two channel DSP (there's a preprocessor project, too)
Signal generator, up to 30MHz.

All kinds of test functions (i.e., different wave forms at various voltages)

30W mini DL with watt meter (almost fits in a shirt pocket)

Old computer PS redesigned for powering the projects.

Morse Code Tutor (the subject of my FDIM presentation this year)

Antenna tuner with SWR display and scan function (very useful for trimming antennas)

Our Mag loop with remote controller (tested to 100' and used in Field Day).





--
Jack, W8TEE


Re: Receive noise in just built version 5

MadRadioModder
 

Usually works.  They are not calibrated from the mfgr and rarely work right out of the box. 


MRM

 


On Nov 28, 2019, at 2:39 PM, Morris Ford <morrishford@...> wrote:


Thanks. I did  a quick BFO calibrate and I now hear SSB and dig signals. Not perfect now but I know it will work.

Morris
 K7LSV



On Thu, Nov 28, 2019 at 8:11 AM MadRadioModder <madradiomodder@...> wrote:
Calibrate!


MRM

 


On Nov 28, 2019, at 9:05 AM, Morris Ford <morrishford@...> wrote:

I have a high intensity noise on receive. It almost completely covers any signals, I can hear what I think is sideband under the noise. It is a buzzing kind of sound at medium to high frequency.
Volume control works, tuning works, menu access works, have not tried transmit yet.
Noise is present with antenna connected, goes away with no antenna. Same antenna, different radio, no problem.
Ubitx and different antenna still have same noise.
Different power supply, same noise.
Have not done any calibration.

Where do I start?
Any assistance gratefully accepted.

Thanks.
Morris
K7LSV


--

…_. _._


--

…_. _._


Re: Antuino Can it measure the RF Output Watts

Alex Kelly IWUK
 

Thank you all very much for your knowledge, which is very much appreciated.  We've been using it for antenna construction and its made life so much easier and quicker to say the least. Totally understand about the power input levels now and will look into your ideas for the attenuators.


Re: Receive noise in just built version 5

Morris Ford <morrishford@...>
 

Thanks. I did  a quick BFO calibrate and I now hear SSB and dig signals. Not perfect now but I know it will work.

Morris
 K7LSV



On Thu, Nov 28, 2019 at 8:11 AM MadRadioModder <madradiomodder@...> wrote:
Calibrate!


MRM

 


On Nov 28, 2019, at 9:05 AM, Morris Ford <morrishford@...> wrote:

I have a high intensity noise on receive. It almost completely covers any signals, I can hear what I think is sideband under the noise. It is a buzzing kind of sound at medium to high frequency.
Volume control works, tuning works, menu access works, have not tried transmit yet.
Noise is present with antenna connected, goes away with no antenna. Same antenna, different radio, no problem.
Ubitx and different antenna still have same noise.
Different power supply, same noise.
Have not done any calibration.

Where do I start?
Any assistance gratefully accepted.

Thanks.
Morris
K7LSV


--

…_. _._


Taa-Daa

Jack, W8TEE
 

All:

Most of you are aware that Al (AC8GY) and I are working on a sequel to the Projects book titled Microcontroller Projects for Amateur Radio. We changed the title because we have not limited ourselves to the Arduino family of processors, but include the STM32F1, ESP32, and the Teensy 4.0 controllers. All can be (and, for the book, are) programmed in the Arduino IDE using C. Today, Al and I finished writing the narrative for the last chapter of the book.

We have signed with the ARRL to publish the book, and one reason for signing with them is that they had enough faith to sign a contract with us, but allow us to finish all of the projects before submitting the chapters. That way, Al and I could work in the absence of a publisher breathing down our necks. That's the good news. The bad news is that, despite us beating our Jan 1, 2020, deadline, they are putting the new License manual ahead of us in the production queue. (Boo !) I asked if it would be ready by FDIM and they said no. That was a huge disappointment, but it is what it is. I'm still hopeful it will be out before the end of the second quarter of next year. Still, we feel like a 15 month stone has been lifted off our backs.

Anyway, what follows are some photos of most of the projects. I'll keep everyone posted on publishing details when I know them.

Jack, W8TEE
Al, AC8GY

two channel DSP (there's a preprocessor project, too)
Inline image
Signal generator, up to 30MHz.
Inline image

All kinds of test functions (i.e., different wave forms at various voltages)
Inline image

30W mini DL with watt meter (almost fits in a shirt pocket)
Inline image
Old computer PS redesigned for powering the projects.
Inline image
Morse Code Tutor (the subject of my FDIM presentation this year)
Inline image
Antenna tuner with SWR display and scan function (very useful for trimming antennas)
Inline image
Our Mag loop with remote controller (tested to 100' and used in Field Day).

Inline image



--
Jack, W8TEE


Re: Receive noise in just built version 5

Alberto
 

Do you have switching power supply ???

El jue., 28 de nov. de 2019 a la(s) 12:16, howard winwood G4GPF
<winwoodh@...> escribió:
Do the BFO tune, you will find the difference amazing.


Re: Receive noise in just built version 5

howard winwood G4GPF <winwoodh@...>
 

Do the BFO tune, you will find the difference amazing.


Re: Receive noise in just built version 5

MadRadioModder
 

Calibrate!


MRM

 


On Nov 28, 2019, at 9:05 AM, Morris Ford <morrishford@...> wrote:

I have a high intensity noise on receive. It almost completely covers any signals, I can hear what I think is sideband under the noise. It is a buzzing kind of sound at medium to high frequency.
Volume control works, tuning works, menu access works, have not tried transmit yet.
Noise is present with antenna connected, goes away with no antenna. Same antenna, different radio, no problem.
Ubitx and different antenna still have same noise.
Different power supply, same noise.
Have not done any calibration.

Where do I start?
Any assistance gratefully accepted.

Thanks.
Morris
K7LSV


--

…_. _._


Receive noise in just built version 5

Morris Ford <morrishford@...>
 

I have a high intensity noise on receive. It almost completely covers any signals, I can hear what I think is sideband under the noise. It is a buzzing kind of sound at medium to high frequency.
Volume control works, tuning works, menu access works, have not tried transmit yet.
Noise is present with antenna connected, goes away with no antenna. Same antenna, different radio, no problem.
Ubitx and different antenna still have same noise.
Different power supply, same noise.
Have not done any calibration.

Where do I start?
Any assistance gratefully accepted.

Thanks.
Morris
K7LSV


Re: #ubitx-help µBitx wiring - one stupid question #ubitx-help

Przemek
 

 Very usefull! Equipment pre-assembled and tested (for now only RX). Now it's time for housing. 
Thanks!


Re: #ubitx #ubitx-help How to recognize the PCB/hardware version #ubitx #ubitx-help

Przemek
 

Thank all for answers! I found PCB version  right above the P2.
73!


Re: Antuino Can it measure the RF Output Watts

 

At 28/11/2019, you wrote:
I would use an RF tap, such as the one here: http://www.ad5x.com/images/Articles/Tap50dbRevA.pdf
As Raj has said, a power-sinking attenuator could also be used. There are many dummy-loads with monitor outputs available, many from commercial installs such as repeaters or cell stations. I have one that will sink 250W continuous all day long and has a 40dB monitor port.
You could also use a directional coupler, as was suggested, but getting one with a flat, calibrated coupling would be costly. I have a few different ones, both home-brew and commercial (but hobby-grade) and the coupling can vary by a few dB even just in the span of the HF bands.
HTH
Gerry


Re: Antuino Can it measure the RF Output Watts

Gerry Kavanagh
 

I would use an RF tap, such as the one here: http://www.ad5x.com/images/Articles/Tap50dbRevA.pdf
As Raj has said, a power-sinking attenuator could also be used. There are many dummy-loads with monitor outputs available, many from commercial installs such as repeaters or cell stations. I have one that will sink 250W continuous all day long and has a 40dB monitor port.
You could also use a directional coupler, as was suggested, but getting one with a flat, calibrated coupling would be costly. I have a few different ones, both home-brew and commercial (but hobby-grade) and the coupling can vary by a few dB even just in the span of the HF bands.
HTH
Gerry


Re: Newbie Support Pages?

Stephen Wandling
 

Thanks Curt. I sense this is good advice. 

Stephen 
VE7NSD

On Tue, Nov 26, 2019, 5:16 PM Curt via Groups.Io, <wb8yyy=yahoo.com@groups.io> wrote:
Stephen

the information overload can be vast.  if you want to enjoy your stock build - just use the supplied instructions and web content at HF signals. 

there is one pertinent detail to think about - what type of display to you plan to end up with?  I am thrilled with the stock LCD (okay boring but it does the function for many of us around the globe, with low electricity) - but if you plan to upgrade that will influence your case (many options here - mine is in a amateurradiokits case from India.  BTW he has nice building info at ubitx.com last I knew). 

please note the v5 being sold now is said to require no mods.  many additions are rather simple - just AGC and a S-meter-like movement, my CW filter is still external until I build another one to integrate. 

enjoy your build and operation of the rig - yes turn off the info overload until you are ready.

73 Curt


Re: InKits Nextion case power wiring

Justin Phillips K5AXL <dolmdemon@...>
 

I think their power schematic is more a suggestion or how Sunil did it. If you have no need of a battery connection you can leave that out. The power schematic they provided does depict dc barrel power going to the 3 way rocker switch first, then to the fuse. I'm no EE, so I don't know if there any technical advantage to putting the main switch before or after the fuse, but I wired mine the way their schematic/pics show it, just left the batter connection off. I was thinking of putting the case fan on the second position, so I can power on with or without the fan running.

They have a download available with lots of pictures and a couple schematics to help explain their intended wiring.

https://amateurradiokits.in/downloads/

Scroll all the way down for the Nextion case files.

15721 - 15740 of 88171