Hmmmmm.   Interesting.... 

On Apr 24, 2018, at 08:24, Karl Heinz Kremer, K5KHK <khk@...> wrote:

This is why Ian is using a version control system. As long as there are labels attached to each version, you can always go back and forward between versions without having to resort to different file names or different folders. As Ian explained, using different filenames actually breaks this mechanism. You may want to look into a Git tutorial to see how easy it is to - with just three or four commands you can do all that. All you need is to have Git installed on your system. 

To create a copy of the repository, you use this command (this assumes a Linux or other Unix type system - I don't know what the corresponding commands would be for Windows):

git clone https://github.com/phdlee/ubitx.git

You then go into the ubitx folder:

cd ubitx

From within this folder, you can list the tags that are available:

git tags

If you want to use the latest version, you are usually already all set, to go back to a previous version, you would use the checkout command:

git checkout v1.06

The argument you use (in this case "v1.06" is one of the tags that were listed with the "tags" command above).

You can always find out what's going on by using the "status" command:

git status

Especially if you want to make your own changes, Git is a great system, because you will always know what you've changed and you can keep track of your changes by creating your own branches and tags. 

This is how professional software development is done. 

--
Karl Heinz - K5KHK

This is why Ian is using a version control system. As long as there are labels attached to each version, you can always go back and forward between versions without having to resort to different file names or different folders. As Ian explained, using different filenames actually breaks this mechanism. You may want to look into a Git tutorial to see how easy it is to - with just three or four commands you can do all that. All you need is to have Git installed on your system. 

To create a copy of the repository, you use this command (this assumes a Linux or other Unix type system - I don't know what the corresponding commands would be for Windows):

git clone https://github.com/phdlee/ubitx.git

You then go into the ubitx folder:

cd ubitx

From within this folder, you can list the tags that are available:

git tags

If you want to use the latest version, you are usually already all set, to go back to a previous version, you would use the checkout command:

git checkout v1.06

The argument you use (in this case "v1.06" is one of the tags that were listed with the "tags" command above).

You can always find out what's going on by using the "status" command:

git status

Especially if you want to make your own changes, Git is a great system, because you will always know what you've changed and you can keep track of your changes by creating your own branches and tags. 

This is how professional software development is done. 

--
Karl Heinz - K5KHK

Buddy:

There are some very interesting filters available in software where you can not only set the "center" frequency, but also the edges where the skirt "knees" are located. When I'm listening to code, I dial 'er down pretty tight as I find listening to the Big Bang during a CW session distracting rather than soothing. It all a matter of choice.

Jack, W8TEE

On Monday, April 23, 2018, 12:22:30 PM EDT, Buddy Brannan <buddy@...> wrote:

Hey Gordon,

Agreed about the super duper narrow filters. With all of the ways to crank down the bandwidth and peak the audio and reduce the noise and what not that are on my KX3, I rarely use much of that myself and, unless the bands are very crowded, open the receiver up some besides. Strange as it may sound, I find the background atmospheric noise soothing. Well, except maybe not so much the 80m static crashes. 

Now, after 30 years of being a ham, I’m interested in trying some kit building myself…it’s one aspect I feel like I’ve missed out on…especially now that I have a willing assistant :-) Still…being blind, these tiny parts make me a little nervous, and surface mount stuff is just right out. Anyway, think my YL and I can tackle a UBitx sometime soonish. 

Vy 73

On Apr 23, 2018, at 12:15 PM, Gordon Gibby <ggibby@...> wrote:

​I actually sorta like a wider bandwidth, unless I have a really interfering signal.

A couple decades ago I remember actually building a LC audio filter --- toroids & capacitors and maybe even a vacuum tube!!!   to run a headset.   I may even still have the thing.

Nowadays it is ducksoup to put something like that together with all the integrated circuits and I think I seem them advertized all over.    

Narrower than 500 hz makes my head hurt!

Cheers -- to each his own!!!!!

gordon

---

 

From: BITX20@groups.io <BITX20@groups.io> on behalf of Buddy Brannan <buddy@...>
Sent: Monday, April 23, 2018 12:04 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Practical CW Operation? #ubitxcw

 

Ehhh! Listening to cw with a 2.someKHz filter is good for you! It will hone your cw listening skills and let you learn to pick the right signal out :-) 

In all seriousness, Gordon’s suggestion of an audio filter is a good one. While it’s not really the same as a filter in the receiver, they’re pretty good…or can be…and certainly can be very effective. I reckon that a DSP-based filter would be a bit beyond the capability of the Arduino. Also probably not exactly cost effective as compared to the rest of the radio. 

Do remember this is a really low-cost radio, and you probably won’t get Icom performance, or probably not even Xiegu performance, out of it, though I’m sure what you will get will be pretty decent…especially given how popular the rig seems to be. 

Vy 73, de KB5ELV

On Apr 23, 2018, at 11:53 AM, Gordon Gibby <ggibby@...> wrote:

Just add an audio filter to achieve whatever bandwidth you prefer would be my suggestion

On Apr 23, 2018, at 11:50, Braden Glett <bradenglett@...> wrote:

I've heard that the ubitx doesn't work very well for CW due to being too wide in the receiving end. How are some of you correcting this? Particularly, how can someone who can handle a soldering iron but is not an electronics whiz, adapt the ubitx for practical CW operation? 
Thanks and 73
Brady KD8ZM 

Jerry:

I realize the power the Pi has and I'm familiar with compiler design and grammars, as my old software company built and marketed its own C compiler for DOS back in '80s...without yacc! Al and I have been through a pretty rigorous µC decision process for our Jackal project, looking at Pi, Mega2560, Due, Mega Zero, and the new Protoneer board to replace the Raduino/Nano board. We settled on the Teensy 3.6. One of our goals is to encourage hacking by those who are already familiar with the µBITX, and that suggested sicking with a processor that could run in the Arduino IDE. The Teensy 3.6 has

• 180 MHz ARM Cortex-M4 with Floating Point Unit
• 1M Flash, 256K RAM, 4K EEPROM
• Microcontroller Chip MK66FX1M0VMD18 (PDF link)
• USB High Speed (480 Mbit/sec) Port
• 2 CAN Bus Ports
• 32 General Purpose DMA Channels
• 22 PWM Outputs
• 4 I2C Ports
• 11 Touch Sensing Inputs

and costs a little less than the Pi. The FPU is important in many SDR's that use FFT algorithms, and the Teensy has a very good FFT library. It also has a terrific audio library that we are using in our filter elements. However, to me, the critical elements were that the 256K of SRAM removes the real bottleneck of the Arduino family and there are a host of relevant libraries for the processor. Atmel needs to get its act together and boost its processor resource base if it wants to stay competitive. (I taught an assembler course on a Z80 back in the '80s and, you're right, the 328 reminds me of it although the memory architecture's a little different.)

Anyway, we experimented with Pi and other processors for over a month before we committed Jackal to the Teensy. We made the right choice for us. Al and I will be showing Jackal at the FDIM conference...I think it's pretty cool and brings a lot to the table. That's not to say that someone shouldn't give Pi a try as a Raduino replacement. It's just not for us.

Jack, W8TEE

On Monday, April 23, 2018, 12:24:48 AM EDT, Jerry Gaffke via Groups.Io <jgaffke@...> wrote:

The ATMega328P on the Nano runs at 16 MHz, has 0.002 MBytes of RAM, is an 8 bit machine.

The RPi Zero runs at a 1000 MHz, has 512 MBytes of RAM, is a full a 32 bit machine,
runs linux if you wish.  Not only will it run the C and C++ code we have on the Arduino
(if you port the Arduino libraries), but it has its own compiler for it.
And a compiler compiler to build the compiler with for that matter (yacc). 

>  I'd consider why the Zero sells for $5.

It sells for $5 because it is of the current decade.
Whereas the ATMega382P is roughly in league with the Z80
I was working with back in the 1970's.
 
That said, the Nano is a fine choice for the basic uBitx.
Not all that much it has to do.

The RPi Nano would be good if you wish to implement standalone SDR, 
with a full waterfall display out to an HDMI monitor.
Or could be used as the Arduino IDE host when programming your Nano.
The top end Rasberry Pi 3 B+ does everything I'd want in a home computer for $35.

Jerry, KE7ER


On Sun, Apr 22, 2018 at 06:17 pm, Jack Purdum wrote:

I'd consider why the Zero sells for $5. I think the biggest issue is that the Pi is a different animal than the Arduino family. First, it does not have a home in the Arduino IDE, where most of the µBITX work is being done. Second, it doesn't have the depth of add-ons that the Arduinos do. Those that do exist seem to be more expensive. Third, most of the work on Pi is either done in scripting languages or Python, neither of which is popular on the Arduino.

If you need more horsepower, consider the Protoneer (eBay 282786290858). It has 256K of flash, 32K of SRAM (HUGE benefit), and is clocked 3x faster than the Nano at a cost of $15. It looks very promising.

Jack, W8TEE

 

 

No way should anyone hate anything.  It may be an eye opener to some what can be done with a modern micro-controller.  I am glad Jack gave honorable mention to the Protoneer.  Before I ordered it last week, I came up with zero hits for Protoneer here. Thought I might be a little crazy since very sharp minds are active and voicing their opinions.  I hate to see great  software work by Ian and others be limited to choices based on the flash memory space of the Arduino Nano, which is also consumed by the boot loader.  The idea is this may help those that want a lower end "modern" 32 bit digital solution with a reasonable amount of SRAM for their uBITX with a small $ additional investment.  Even the Pi fans might find a need for a little more horsepower in the micro-controller.  Then again, I could be blown away by a pure Pi controller implementation.

I don't think any of us want to someone else to become a drooler, well at least I hope not.  From what I see here, it is enabling.  Sharing knowledge.  Albeit overwhelming at times.
The dust will eventually settle from the excitement stampede unleashed by Farhan, and the path you choose will become clear.  Hopefully everyone will choose to ride along, and the world wide amateur community benefit from your participation.

Im not sure you understand this completely, so ill put this more clearly. When the main sketch has the same name from version to version and you upload it to the Arduino IDE, it over-writes the previous version because it has the SAME NAME.  Of you were to include the version number in the program name, they would not over-write. 

William

 

I use git for version control, but it seems to be difficult to trace history when the file name changes.

Instead, I will create a separate file to keep track of which files have changed each time I deploy.

All filenames are now cleaned up.

Since Version 1.070, there was work such as splitting and merging files to support various hardware.

 

I will publish Version 1.073 (Beta) within a day.

Thank you for testing the firmware.

 

Ian KD8CEC

 

2018-04-24 9:31 GMT+09:00 K9HZ <bill@...>:

Ian... would you PLEASE consider writing the version number in the file name of the code?  That way different versions can be saved easily in the Arduino ISD. 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

 

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

 

Owner – Operator

Villa Grand Piton - J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com

 

email:  bill@...

 

On Apr 22, 2018, at 2:50 PM, Ian Lee <kd8cec@...> wrote:

Rod, All

 

I am always thanking Rod.

And I'm sorry to interrupt Rod's work with too many changes in functionality.

 

1.072 will be tested and will be released as 1.073 Beta.

Several minor ones have been added.

Please wait for a day or two to download the code or firmware. 

 

Perhaps 1.07x will continue to be a Beta version.
Frequent formal firmware release seems to be inconvenient for some people, so I try to release it after various tests.

 

I think Version 1.061 is a stable version. I know there is some nice firmware based on Version 1.061 and I will install it on my Spare uBITX.

Version 1.061 and later versions are also based on Version 1.061.

The Portable version and the various language versions are all excellent Firmware and I share code with them.

 

Please wait for a day or two , I'll release version 1.073 beta after testing in various environments (including Linux).

 

Thank you

 

Ian KD8CEC

 

2018-04-22 7:25 GMT+09:00 Rod Davis <km6sn@...>:

Hi All,

Ron, W7HD, points out that downloading the KD8CEC 1.072 can be a problem

because version 1.072 does not appear in the list.

 

It is necessary to click on the Branch button, then use your mouse wheel to

scroll down until the version1.072 is revealed.

 

Best to All,

Rod KM6SN

 

 

See below for an excerpt:

Download the CECFW source code from github

https://github.com/phdlee/ubitx

For this example we will be using version 1.072.

 

<Image4>

Click the “Branch” button to select version 1.072, then click “Clone or download” and click “Download ZIP”. Unzip the downloaded file and make a note of the folder location, or move the unzipped directory into your arduino sketch folder.

 

 

--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)

 

--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)

So far I received 10 requests for parts as of now. I have mailed out today 7, the remaining 3 will be in the mail tomorrow. I expect the results to vary, because it if transistor dependent. Please let us know how it works for you.
Also, thanks for sending me the QRP sticker. Some sent me money, which is a nice thought, but completely unnecessary. I have these 2 reels of parts, with 1000s of parts on each left over from an old business. The parts are 20 years old, so they have no resale value. I'm just happy they are being put to good use.
I am working on some other changes, AGC and S meter. The AGC works well, but the S meter, not so well, so I need to work more on that. I will post the work when I finish. After that I will work on the 70 watt amp, which I mentioned before, and probably a preamp.

Howard



On 4/20/2018 7:14 PM, Chris Clarke wrote:

Howard

I don't normally do SMD but this sounds like a good idea ... I'll need to order some for this side of the pond, but which physical SMD sizes are these components?

73 Chris
G3SQU

Yep, every one is different and, man, are you gonna hate the Jackal board:

<NewDisplayCenterFrequency001.JPG>

Jack, W8TEE

On Monday, April 23, 2018, 9:32:56 PM EDT, Kees T <windy10605@...> wrote:

Jack,

I agree that there are many people standing on Farhan's shoulders and he has certainly created/generated a huge interest in his uBIT-X design point..... key parameters being that the cost is being held low for a simple design to allow more people to try modifications if they want to ......AND he's allowing others to start small businesses and learn skills. I think the latter, in itself, is great. 

Message counts of ~2000 per month definitely indicate a huge interest.

My point was that there are many steps in the progression from the uBIT-X that arrived in the mailbox, TO one that has slight modifications, TO more comprehensive AGC hardware, audio amps, etc, TO SWR indications, 4 line displays, more keyer features,
TO DSP and other SW defined modes, RPi, Teensy 3.5/3.6, large touch screens, etc ......you get the idea. Many options. The point is that you can take the path and get off at any step. I personally want to go as far as I feel makes sense to me (staying with the Nano or an Arduino based derivative and basically "Keeping It Simple") with a result that I think I can reach, and a Transceiver I will/can use. Some of the guys that want to Hack-to-the- Max ....more power to them but the number of followers will drop off pretty quickly and I for one will become a (maybe) drooler, not a follower.   

73 Kees K5BCQ

<NewDisplayCenterFrequency001.JPG>

William

I use git for version control, but it seems to be difficult to trace history when the file name changes.

Instead, I will create a separate file to keep track of which files have changed each time I deploy.

All filenames are now cleaned up.

Since Version 1.070, there was work such as splitting and merging files to support various hardware.

I will publish Version 1.073 (Beta) within a day.

Thank you for testing the firmware.

Ian KD8CEC

2018-04-24 9:31 GMT+09:00 K9HZ <bill@...>:

Ian... would you PLEASE consider writing the version number in the file name of the code?  That way different versions can be saved easily in the Arduino ISD. 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

 

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

 

Owner – Operator

Villa Grand Piton - J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com

email:  bill@...

 

On Apr 22, 2018, at 2:50 PM, Ian Lee <kd8cec@...> wrote:

Rod, All

I am always thanking Rod.

And I'm sorry to interrupt Rod's work with too many changes in functionality.

1.072 will be tested and will be released as 1.073 Beta.

Several minor ones have been added.

Please wait for a day or two to download the code or firmware. 

Perhaps 1.07x will continue to be a Beta version.
Frequent formal firmware release seems to be inconvenient for some people, so I try to release it after various tests.

I think Version 1.061 is a stable version. I know there is some nice firmware based on Version 1.061 and I will install it on my Spare uBITX.

Version 1.061 and later versions are also based on Version 1.061.

The Portable version and the various language versions are all excellent Firmware and I share code with them.

Please wait for a day or two , I'll release version 1.073 beta after testing in various environments (including Linux).

Thank you

Ian KD8CEC

2018-04-22 7:25 GMT+09:00 Rod Davis <km6sn@...>:

Hi All,

Ron, W7HD, points out that downloading the KD8CEC 1.072 can be a problem

because version 1.072 does not appear in the list.

It is necessary to click on the Branch button, then use your mouse wheel to

scroll down until the version1.072 is revealed.

Best to All,

Rod KM6SN

See below for an excerpt:

Download the CECFW source code from github

https://github.com/phdlee/ubitx

For this example we will be using version 1.072.

<Image4>

Click the “Branch” button to select version 1.072, then click “Clone or download” and click “Download ZIP”. Unzip the downloaded file and make a note of the folder location, or move the unzipped directory into your arduino sketch folder.

--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)

--
Best 73
KD8CEC / Ph.D ian lee
kd8cec@...
www.hamskey.com (my blog)

I've modified many 20a's using the directions on my web page. http://golddredgervideo.com/kc0wox/bitx20amods/varactormod.htm The key is the varactor. I would guess that the one you have doesn't give a 400 pfd variation in capacitance.with an 8n 0r 9 volt variation. What is the varactor diode that you are using? I have used the NTE618 and it has a capacitance range of 20pfd at 8 volts and 420pfd at 1.2 volts. Also acceptable is a MVAM108 or MVAM109 Let me know what you are using. Send me your email address to kc0wox@... and I'll get back to you by email.
Leonard
kc0wox