Date   
Oscilloscope for Beginners

Guy N7BIR <sgbridge@...>
 

While on the Circuit Specialists web site I came across this:
Hantek  20 MHz USB Oscilloscope for PC. 
Is this something that could be used for radio troubleshooting? Have never used a scope before and would appreciate your comments. 
73,
Guy N7BIR 

Re: Creating Gerber files for pcb construction

Gordon Gibby <ggibby@...>
 

I don't have the exact number, but one company was about $24 (including shipping) and the other company was $28 (including shipping) --- 5 boards each company. First time customer.

________________________________________
From: BITX20@groups.io <BITX20@groups.io> on behalf of B C <k9wis@...>
Sent: Tuesday, January 23, 2018 4:19 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction

what did those boards cost you??
Brian K9WIS

---- Gordon Gibby <ggibby@...> wrote:
​Thanks to all your suggestions I made two trial orders:

pcbway.com

jlcpcb.com


About last friday night/saturday.

The first set is supposed to arrive sometime tomorrow (wednesday)

and the other set on Thursday. amazing.


Fingers crossed that I did this correctly!!!


Showed this project to my youngest son (working as a new auto mechanic) and he was motivated to get out the christmas arduino kit I gave him and immediately started building LED circuits....astonishing my wife and me....may help him out in life.




________________________________
From: BITX20@groups.io <BITX20@groups.io> on behalf of Gordon Gibby <ggibby@...>
Sent: Sunday, January 21, 2018 12:09 AM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction


Thanks for yet another great suggestion.


I have now created a "flying jumpers" breadboard version using a couple of different resistive bridge designs --- the K6BEZ design driven by the Si5351 directly didn't produce enough voltage to make the reverse measurement accurate and I gave up after several hours on that. Would need to add an amplification stage I believe... The easy swr indicator kit from https://urldefense.proofpoint.com/v2/url?u=http-3A__www.qrpkits.com_ezseries.html-23ezswr&d=DwIFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=E2shNumHkU2z89FEz9fB1rmv1B9-9CwkXYgBQ56sX18&s=wATr3kl2cd5RzPMIGfxbDzykiABvusgbH-fnLXPAkSA&e=<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.qrpkits.com_ezseries.html-23ezswr&d=DwMFAw&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=McWMTsaWY88BIHjI9RhDX8BXq0BroHl6MaH6P7zGTVo&s=iOg3ff6bkbrqV9BQbMsupWJHkEUhFqFcHTVOepLM0YM&e=> (no LED, just take the rectified voltage and run into an op amp with a gain of about 6) produced a voltage that seemed to work. My circuit is sorta haywire (with egloo jumpers everywhere) and the pcb version would be FAR MORE STABLE but I'm able to measure shorts, 25 ohm, 50 ohm, 100 ohm, 220 ohm and open circuit and get "sorta close SWR" measurements at frequencies up to maybe 30 MHz. There is so much haywiredness to the breadboard that I can't make any better observations at the moment. The PCB should be a ton more mechanically stable. Earlier today I put it on a real antenna and it did find the resonance.


A friend is working on the "single meter" SWR version using a toroidial swr measurement head (which I also have built and should also work). The goal there is to emulate the $129 LDG big meter display of SWR..... The pcb that I cranked out (and now being built in China, fingers crossed!) should work with both. (2 different inputs).


You folks are a lot brighter at this stuff than I am but it has been a ton of fun just getting this much to work! I think this is going to be a great building project for our ARES group.






________________________________
From: BITX20@groups.io <BITX20@groups.io> on behalf of William R Maxwell <wrmaxwell@...>
Sent: Saturday, January 20, 2018 5:02 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction


Another to consider is www.jlcpcb.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.jlcpcb.com&d=DwMF-g&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=IdE0tYxjCfc0L_NPXEC5rll-igwhgt6ppqTzraUYlNc&s=WtrSAHHYrh1yu_YDRixyHaUjQzv0a3Hp9-zY2b8fanM&e=>. I have just received 10 boards for a mere $2 total, including DHL shipping. Note the there is a sixe limit of 100mmx100mm, and two layers, green solder resist and 1.6mm material.

This offer I think is limited to your initial order. A subsequent set of 3 boards, 10 copies each, cost me $29, including shipping.

Bill, VK7MX

On 21/01/2018 12:38 AM, Gordon Gibby wrote:
Wow!!! Thank you for that wonderful tip.

Sent from my iPhone

On Jan 20, 2018, at 06:51, Kerr Smith <kerrsmithusa@...<mailto:kerrsmithusa@...>> wrote:

Have you looked at PCB Shopper? You just set the size of your PCB and how any boards you require and it will list all the main PCB fabrication sites and how much it will cost:

https://urldefense.proofpoint.com/v2/url?u=https-3A__pcbshopper.com&d=DwIFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=E2shNumHkU2z89FEz9fB1rmv1B9-9CwkXYgBQ56sX18&s=0xNqpq13ii9aT1Sh5iz_prDuqOsArD7fo-GvxVduS2A&e=<https://urldefense.proofpoint.com/v2/url?u=https-3A__pcbshopper.com&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=x1CZZZOSFNIXEjRrVRTlehkNhcaChUif1k7nsMKwx4Q&e=>

For my latest PCBs I tried AllPCB and was extremely pleased with the results, they had an offer on at the time so for $5 I got 7 boards on one order and for my second $5 order I got 17 boards (if your boards are small they seem to add in extra to your order) - they were all shipped using TNT and arrived in just 5 days. At the current time the total cost is $12 for 5 boards up to 35mm x 35mm with free TNT shipping:

https://urldefense.proofpoint.com/v2/url?u=http-3A__www.allpcb.com&d=DwIFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=E2shNumHkU2z89FEz9fB1rmv1B9-9CwkXYgBQ56sX18&s=XnTdlYHqFlKmjNeCLrFl6eNp9UdCG5Xzx2kDDYXCyOg&e=<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.allpcb.com_setinvite.aspx-3Finviteid-3D30276-26url-3Dhttp-3A__www.allpcb.com_online-5Fquote.html&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=VRALDmdsziyoxueeKz6mXPEvcc6DHC3hcVq_mlvqGIo&e=>

The other site I would recommend is OSHPark:

https://urldefense.proofpoint.com/v2/url?u=https-3A__oshpark.com&d=DwIFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=E2shNumHkU2z89FEz9fB1rmv1B9-9CwkXYgBQ56sX18&s=z3OHoUEftZQXgilq__PmOkVk9mUQmTqOuH12jAGHT0c&e=<https://urldefense.proofpoint.com/v2/url?u=https-3A__oshpark.com_&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=dqHZt9-lgSwySoNuMqvHedfU_5GT-Uu8usvQgbFEknc&e=>

They are the ones who do the purple PCBs which look really great and also pretty cheap, only a few dollars (around $9.50) for three 35mm x 35mm boards with shipping included.

I am so pleased that the price for creating PCBs yourself is now this low, up until now I have been carefully making my own by etching them but now I can get them in a few days if I need them fast or a couple of weeks if I don't mind waiting. There are so many different fabrication sites there is always going to be a great deal to be had if you shop around a bit, the PCB Shopper site I mentioned above is really great for this.

Re: Ubitx case

Glenn AE0Q <ae0q@...>
 

I just received my case for the uBITx today from the same supplier that David posted the link to, it was well packaged with all parts in separate plastic bags and foam between painted parts.
  
Photos attached that show the great packing from Thailand.
 
This is the slightly shorter (1.5U) 65 x 178 x 203 mm box.
 
Glenn AE0Q
 

Re: BITX-40 just built it #bitx40

Arvo W0VRA
 

I'm thinking about building one into a fancy wood box, so the panel would be under the lid.  A custom aluminum panel would be great for that.

Re: Creating Gerber files for pcb construction

K9WIS
 

what did those boards cost you??
Brian K9WIS

---- Gordon Gibby <ggibby@...> wrote:

​Thanks to all your suggestions I made two trial orders:

pcbway.com

jlcpcb.com


About last friday night/saturday.

The first set is supposed to arrive sometime tomorrow (wednesday)

and the other set on Thursday. amazing.


Fingers crossed that I did this correctly!!!


Showed this project to my youngest son (working as a new auto mechanic) and he was motivated to get out the christmas arduino kit I gave him and immediately started building LED circuits....astonishing my wife and me....may help him out in life.




________________________________
From: BITX20@groups.io <BITX20@groups.io> on behalf of Gordon Gibby <ggibby@...>
Sent: Sunday, January 21, 2018 12:09 AM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction


Thanks for yet another great suggestion.


I have now created a "flying jumpers" breadboard version using a couple of different resistive bridge designs --- the K6BEZ design driven by the Si5351 directly didn't produce enough voltage to make the reverse measurement accurate and I gave up after several hours on that. Would need to add an amplification stage I believe... The easy swr indicator kit from http://www.qrpkits.com/ezseries.html#ezswr<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.qrpkits.com_ezseries.html-23ezswr&d=DwMFAw&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=McWMTsaWY88BIHjI9RhDX8BXq0BroHl6MaH6P7zGTVo&s=iOg3ff6bkbrqV9BQbMsupWJHkEUhFqFcHTVOepLM0YM&e=> (no LED, just take the rectified voltage and run into an op amp with a gain of about 6) produced a voltage that seemed to work. My circuit is sorta haywire (with egloo jumpers everywhere) and the pcb version would be FAR MORE STABLE but I'm able to measure shorts, 25 ohm, 50 ohm, 100 ohm, 220 ohm and open circuit and get "sorta close SWR" measurements at frequencies up to maybe 30 MHz. There is so much haywiredness to the breadboard that I can't make any better observations at the moment. The PCB should be a ton more mechanically stable. Earlier today I put it on a real antenna and it did find the resonance.


A friend is working on the "single meter" SWR version using a toroidial swr measurement head (which I also have built and should also work). The goal there is to emulate the $129 LDG big meter display of SWR..... The pcb that I cranked out (and now being built in China, fingers crossed!) should work with both. (2 different inputs).


You folks are a lot brighter at this stuff than I am but it has been a ton of fun just getting this much to work! I think this is going to be a great building project for our ARES group.






________________________________
From: BITX20@groups.io <BITX20@groups.io> on behalf of William R Maxwell <wrmaxwell@...>
Sent: Saturday, January 20, 2018 5:02 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction


Another to consider is www.jlcpcb.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.jlcpcb.com&d=DwMF-g&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=IdE0tYxjCfc0L_NPXEC5rll-igwhgt6ppqTzraUYlNc&s=WtrSAHHYrh1yu_YDRixyHaUjQzv0a3Hp9-zY2b8fanM&e=>. I have just received 10 boards for a mere $2 total, including DHL shipping. Note the there is a sixe limit of 100mmx100mm, and two layers, green solder resist and 1.6mm material.

This offer I think is limited to your initial order. A subsequent set of 3 boards, 10 copies each, cost me $29, including shipping.

Bill, VK7MX

On 21/01/2018 12:38 AM, Gordon Gibby wrote:
Wow!!! Thank you for that wonderful tip.

Sent from my iPhone

On Jan 20, 2018, at 06:51, Kerr Smith <kerrsmithusa@...<mailto:kerrsmithusa@...>> wrote:

Have you looked at PCB Shopper? You just set the size of your PCB and how any boards you require and it will list all the main PCB fabrication sites and how much it will cost:

https://pcbshopper.com<https://urldefense.proofpoint.com/v2/url?u=https-3A__pcbshopper.com&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=x1CZZZOSFNIXEjRrVRTlehkNhcaChUif1k7nsMKwx4Q&e=>

For my latest PCBs I tried AllPCB and was extremely pleased with the results, they had an offer on at the time so for $5 I got 7 boards on one order and for my second $5 order I got 17 boards (if your boards are small they seem to add in extra to your order) - they were all shipped using TNT and arrived in just 5 days. At the current time the total cost is $12 for 5 boards up to 35mm x 35mm with free TNT shipping:

http://www.allpcb.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.allpcb.com_setinvite.aspx-3Finviteid-3D30276-26url-3Dhttp-3A__www.allpcb.com_online-5Fquote.html&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=VRALDmdsziyoxueeKz6mXPEvcc6DHC3hcVq_mlvqGIo&e=>

The other site I would recommend is OSHPark:

https://oshpark.com<https://urldefense.proofpoint.com/v2/url?u=https-3A__oshpark.com_&d=DwMFaQ&c=pZJPUDQ3SB9JplYbifm4nt2lEVG5pWx2KikqINpWlZM&r=3ELgZgmTnPzGsfvQxkd1S_2NGLYM8sHTxVCQKFxhVXQ&m=tVwyxBAPRZNQpdExa-g1tsq8okRaE7YCQUjWUUW6hMg&s=dqHZt9-lgSwySoNuMqvHedfU_5GT-Uu8usvQgbFEknc&e=>

They are the ones who do the purple PCBs which look really great and also pretty cheap, only a few dollars (around $9.50) for three 35mm x 35mm boards with shipping included.

I am so pleased that the price for creating PCBs yourself is now this low, up until now I have been carefully making my own by etching them but now I can get them in a few days if I need them fast or a couple of weeks if I don't mind waiting. There are so many different fabrication sites there is always going to be a great deal to be had if you shop around a bit, the PCB Shopper site I mentioned above is really great for this.

Re: BITX-40 just built it #bitx40

Jens / DH1AKY
 

Just uploaded my front-plate design into the ordering tool. Around 33 Euro if you choose Aluminium. Shoud be around $ 33. Don't know the prices in the U.S. but that the price range here in Germany.
73, Jens / DH1AKY

Re: BITX-40 just built it #bitx40

Arvo W0VRA
 

Roughly what's the cost of such a panel?

Re: BITX-40 just built it #bitx40

Dennis Zabawa
 

I have used Front Panel Designer to layout panels that I have had produced and for others that I printed and laminated.  A very easy to use tool.

Re: BITX-40 just built it #bitx40

Jens / DH1AKY
 

Here are the two files. Feel free to use/modify/improve it. 

73, Jens / DH1AKY

Re: Creating Gerber files for pcb construction

Gordon Gibby <ggibby@...>
 

​Thanks to all your suggestions I made two trial orders:

pcbway.com

jlcpcb.com 


About last friday night/saturday.

The first set is supposed to arrive sometime tomorrow (wednesday)

and the other set on Thursday.   amazing.


Fingers crossed that I did this correctly!!!


Showed this project to my youngest son (working as a new auto mechanic) and he was motivated to get out the christmas arduino kit I gave him and immediately started building LED circuits....astonishing my wife and me....may help him out in life.





From: BITX20@groups.io <BITX20@groups.io> on behalf of Gordon Gibby <ggibby@...>
Sent: Sunday, January 21, 2018 12:09 AM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction
 

Thanks for yet another great suggestion.


I have now created a "flying jumpers" breadboard version using a couple of different resistive bridge designs --- the K6BEZ design driven by the Si5351 directly  didn't produce enough voltage to make the reverse measurement accurate and I gave up after several hours on that.   Would need to add an amplification stage I believe...   The easy swr indicator kit from http://www.qrpkits.com/ezseries.html#ezswr  (no LED, just take the rectified voltage and run into an op amp with a gain of about 6)  produced a voltage that seemed to work.   My circuit is sorta haywire (with egloo jumpers everywhere) and the pcb version would be FAR MORE STABLE but I'm able to measure  shorts, 25 ohm, 50 ohm, 100 ohm, 220 ohm and open circuit and get  "sorta close SWR" measurements at frequencies up to maybe 30 MHz.   There is so much haywiredness to the breadboard that I can't make any better observations at the moment.   The PCB should be a ton more mechanically stable.  Earlier today I put it on a real antenna and it did find the resonance.   


A friend is working on the "single meter" SWR version using a toroidial swr measurement head (which I also have built and should also work).   The goal there is to emulate the $129 LDG big meter display of SWR.....    The pcb that I cranked out (and now being built in China, fingers crossed!) should work with both.   (2 different inputs).   


You folks are a lot brighter at this stuff than I am but it has been a ton of fun just getting this much to work!  I think this is going to be a great building project for our ARES group.  







From: BITX20@groups.io <BITX20@groups.io> on behalf of William R Maxwell <wrmaxwell@...>
Sent: Saturday, January 20, 2018 5:02 PM
To: BITX20@groups.io
Subject: Re: [BITX20] Creating Gerber files for pcb construction
 

Another to consider is www.jlcpcb.com. I have just received 10 boards for a mere $2 total, including DHL shipping.  Note the there is a sixe limit of 100mmx100mm, and two layers, green solder resist and 1.6mm material.

This offer I think is limited to your initial order. A subsequent set of 3 boards, 10 copies each, cost me $29, including shipping.

Bill, VK7MX


On 21/01/2018 12:38 AM, Gordon Gibby wrote:
Wow!!! Thank you for that wonderful tip.

Sent from my iPhone

On Jan 20, 2018, at 06:51, Kerr Smith <kerrsmithusa@...> wrote:

Have you looked at PCB Shopper? You just set the size of your PCB and how any boards you require and it will list all the main PCB fabrication sites and how much it will cost:

https://pcbshopper.com

For my latest PCBs I tried AllPCB and was extremely pleased with the results, they had an offer on at the time so for $5 I got 7 boards on one order and for my second $5 order I got 17 boards (if your boards are small they seem to add in extra to your order) - they were all shipped using TNT and arrived in just 5 days. At the current time the total cost is $12 for 5 boards up to 35mm x 35mm with free TNT shipping:

http://www.allpcb.com

The other site I would recommend is OSHPark:

https://oshpark.com

They are the ones who do the purple PCBs which look really great and also pretty cheap, only a few dollars (around $9.50) for three
35mm x 35mm boards with shipping included.

I am so pleased that the price for creating PCBs yourself is now this low, up until now I have been carefully making my own by etching them but now I can get them in a few days if I need them fast or a couple of weeks if I don't mind waiting. There are so many different fabrication sites there is always going to be a great deal to be had if you shop around a bit, the
PCB Shopper site I mentioned above is really great for this.

Re: uBitX PA Drivers

M Garza <mgarza896@...>
 

Looking at different schematics, the resistor is usually about 12 ohms.  I would think 11 or even 10 ohms would be fine.  I have attached the part data sheet.  I have not tried this, so YMMV.  It was just an idea.  If you have any old 10/11 meter SSB radios, you might be able to salvage a couple to try with.

Let us know, if you do try this.

Marco - KG5PRT 

On Jan 23, 2018 7:17 AM, "K9HZ" <bill@...> wrote:

Those are excellent low power RF amplifiers… will work above the 432 band…

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

 

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

 

Owner – Operator

Villa Grand Piton – J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com

Like us on Facebook! facebook icon

 

 

email:  bill@...

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mike
Sent: Tuesday, January 23, 2018 3:56 AM
To: BITX20@groups.io
Subject: Re: [BITX20] uBitX PA Drivers

 

On Mon, Jan 22, 2018 at 09:00 pm, M Garza wrote:

2SC1973

Re: BITX-40 just built it #bitx40

Vic WA4THR
 

Thanks for the links, Jens, both came up in English here and I grabbed that software. I'd also be interested in your design file as that could save some effort here.

73, =Vic=

Re: BITX-40 just built it #bitx40

Jens / DH1AKY
 

If someone is interested I'll publish the design files here.

73, Jens/DH1AKY

Re: BITX-40 just built it #bitx40

Jens / DH1AKY
 

Sorry, there is also an English version available:

https://www.frontpanelexpress.com/downloads/front_panel_designer/?no_cache=1

Re: BITX-40 just built it #bitx40

Jens / DH1AKY
 

Hi Vic,

the software is from a German Company named Schaeffer AG manufacturing front-panels of aluminium. But you can use it also and print it on plain paper.
https://www.schaeffer-ag.de/downloads/frontplatten_designer/
After printing I cut the window for the display into the paper. Then laminated it one-side only.

I've read about such a method here on the net. It was not my idea. But I tried this and found it managable. The result looks fine if you dont glue that on the PCB material.

On the backside I've tried to glue the paper side on the PCB material. The glue was sucked from the paper and the result looks awfully.

73 Jens/DH1AKY

Re: I2C display up and running on my uBITX

Graham W
 

Using the I2C that frees up a few digital lines that could be used to switch other filters. 
Would it be possible to point to the code you used for this please ? 

Re: Mic Preamp install, bias resistors #ubitx

Arvo W0VRA
 

Oops, I meant C5.

Re: Mic Preamp install, bias resistors #ubitx

Arvo W0VRA
 

Cool, Nick!  I've got a couple of SSM2167 boards, too.

Can you draw up a schematic?  I think I follow what you did, but I want to make sure.

I plan to replace both R1 and R2 with pots.  I'm also going to try to use C3 as part of a HPF by putting another pot between pin 6 and ground.  The goal is to keep everything <300 Hz out of the signal chain.

Re: Ubitx case

Jeffrey Benedict
 

Here's a link to the "Cases and Enclosures" on US eBay:

https://www.ebay.com/b/Electrical-Boxes-Enclosures/42886/bn_7717992

 

Go nuts.

Re: uBitX PA Drivers

K9HZ <bill@...>
 

Those are excellent low power RF amplifiers… will work above the 432 band…

 

 

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

 

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

 

Owner – Operator

Villa Grand Piton – J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com

Like us on Facebook! facebook icon

 

 

email:  bill@...

 

From: BITX20@groups.io [mailto:BITX20@groups.io] On Behalf Of Mike
Sent: Tuesday, January 23, 2018 3:56 AM
To: BITX20@groups.io
Subject: Re: [BITX20] uBitX PA Drivers

 

On Mon, Jan 22, 2018 at 09:00 pm, M Garza wrote:

2SC1973