Thanks for your answer.
I read the datasheet many times and was unable to find the picth.
Looking on internet I only found 0,65mm for MSOP, but that's true my chip seem narrower that the one I just soldered for the Si570 controller.
I will have to find another way to use this chip...
MSOP adapters are harder to find and more expensive.
Yannick DEVOS - XV4TUJhttp://capheda.wordpress.com/http://www.qsl.net/xv4tuj/
Le 26 mai 2010 à 00:07, 2E0ZHN a écrit :
The MSOP pitch is usually 0.65mm or 0.5mm where as SSOP is 0.65mm or 1.27mm. Looking at the data sheet for the SSM2167 it says a pitch of 0.5mm which means unfortunately it will not fit in a SSOP adapter.
73's Elia, 2E0ZHN
--- In BITX20@..., Yannick DEVOS <yannick.devos@...> wrote:
I already asked this question on another group but since nobody seems to know, I give it a try here...
Do you know if a MSOP part will fit in a SSOP prototyping adapter ?
I received a SSM2167 (mike pre-amp + compressor) for my BitX.
Before having the chip in hands, I though I should be able to build an adapter by myself but now I am a bit afraid of damaging the chip.
My parts provider (Futurlec) only sells SSOP to DIL adapters.
The pin pitch seems the same (0,065 mm).
Thanks by advance for your help.
Yannick DEVOS - XV4TUJ
http://capheda.wordpress.com/ (Blog in french)
http://www.qsl.net/xv4tuj/ (web page in english)
[Non-text portions of this message have been removed]