Re: Killed TX this time...


 

RV1 is normally at half position. Some boards will need higher or lower settings depending on the power needed.

Raj

At 06/08/2020, you wrote:

Tom,
Congratulations on the award!

As I am not near my uBITX so can not tell you normal position. If you have a way to measure output power I would adjust for 12 to 15 watts on 80 meters. 80 is normally highest. You can go higher, however I would improve the final heat removal capability (Bigger heat sinks or fan) if you go higher.


73
Evan
AC9TU

Join BITX20@groups.io to automatically receive all group messages.