Re: How to reduce RF power out stepwise with a ubitx V3?


Jep
 

Evan and Raj, 
Thank you for the limpid suggestions; then I will consider installing a pot with a long axe to avoid long wires travelling over the circuit board.
Alternatively, as I do normally use the ubitx for the 40m band only, even a simple switch and a small relay to select  hi/lo power could be an easy approach to reduce power at the level required by a Ten Tec 405 power amplifier. 
Best greetings 
Jep

Join BITX20@groups.io to automatically receive all group messages.