Re: New ham, Ubitx issues #ubitx

dwhacks
 

I tried to re adjust the two bias pots by following the ubitx guide. It says to first turn them clockwise and measure the current, when doing this my total current consumption in 1.2A (some searching says it should be 300-500mA depending on mods), which is quite high. So I put my meter on the brown power wire only (PA power) and the lowest setting I can get is ~900mA with the bias pots clockwise. Idle current is 0.

I am running the ubitx on 12v.

Join BITX20@groups.io to automatically receive all group messages.