1. Messages
  2. UBITX6 Will Not Select 17 Meters

Re: UBITX6 Will Not Select 17 Meters

Jim Sheldon
 

Erwin Serle,
Did you not read my posts all the way.  I thought that was what I said the person should do.  Besides, KD8CEC and Nextions don't work with the V6 Raduino which uses an ILI9341 TFT Touch screen display, NOT a NEXTION as it comes from the factory.

Jim Sheldon

------ Original Message ------
From: "Erwin Serlé via Groups.Io" <waterwin2@...>
Sent: 1/6/2020 6:02:37 AM
Subject: Re: [BITX20] UBITX6 Will Not Select 17 Meters

@Jim Sheldon, in this case it would be advisable to read and note the original calibration settings before doing the actual install of a new firmware.

Also as far as I understood the findings of KD8CEC a new firmware does not change the stored calibration values.

The KD8CEC Memory Manager software could be used to read the original values before doing any changes.

--
PE3ES - F4VTQ - Erwin
73

Join BITX20@groups.io to automatically receive all group messages.