Re: Wiring question - Nextion case

Justin Phillips K5AXL
 

On an aside, if you haven't assembled the front panel board yet make sure you solder the digital and analog sockets pulled back towards the edge as much as you can. And when you solder the jacks on, make sure they're pulled forward as much as you can, however much play in the holes you have. Mine is so tight i have to press the harnesses in and a bit of an angle to squeeze them in behind the jacks. The jacks are so far back i couldnt get the nuts to get any thread, I wound up using the old ones from the stock ubitx kit, they seemed to get more thread to bite.

Join BITX20@groups.io to automatically receive all group messages.