Re: UBitx v5 Not Saving Calibration or BFO adjustments with CEC v 1.20 Nextion

Evan Hand
 

markix88,

If you are using the KD8CEC memory manager, then you need to read the Nano, decode, make changes and then encode before you write the values to the Nano again.

Then be sure to disconnect the USB cable and power cycle the uBITX.  If you leave the USB cable connected it will keep the Nano powered and the changes will not go into effect until all power is removed from the radio and the display is dark.

I would need to understand what you are doing if you are using the stock firmware from HFSignals, as the uBITX goes into transmit mode to calibrate with the stock code.

73
Evan
AC9TU

Join BITX20@groups.io to automatically receive all group messages.