Re: encoder mod/ seperate switch

Jim Sheldon
 

You don't have to modify the encoder.  Just add an SPST Normally Open pushbutton switch and connect the two wires from the second switch to the wires that go to the two separate pins on the encoder.  The 3 pins on the other side of the encoder are for the frequency encoding function and the two pins by themselves are the switch.  No mods needed to the encoder at all.

Jim - W0EB

------ Original Message ------
Sent: 10/14/2019 6:44:32 AM
Subject: [BITX20] encoder mod/ seperate switch

has anyone modified the encoder  so as to insert a separate switch to overide the need to push the encoder to select menus etc    many thanks   dave c

Join BITX20@groups.io to automatically receive all group messages.